Skip to main content


Production Engineering

Production Engineering 2/2020

Issue 2/2020

Table of Contents ( 12 Articles )

25-01-2020 | Communication | Issue 2/2020

Springback analysis of thick-walled tubes under combined bending-torsion loading with consideration of nonlinear kinematic hardening

A. Farhadi, A. Nayebi

20-12-2019 | Computer Aided Engineering | Issue 2/2020

X-ray computed tomography to investigate industrial cast Al-alloys

Ajith Bandara, Koichi Kan, Hisashi Morii, Akifumi Koike, Toru Aoki

25-01-2020 | Machine Tool | Issue 2/2020 Open Access

Impact-based feed drive actuator for discontinuous motion profiles

Peter Zahn, Alexander Schulte, Alexander Verl

02-01-2020 | Production Management | Issue 2/2020

Multi-objective optimization of lean and resource efficient manufacturing systems

Sebastian Greinacher, Leonard Overbeck, Andreas Kuhnle, Carmen Krahe, Gisela Lanza

01-01-2020 | Production Management | Issue 2/2020

A shifting bottleneck procedure with multiple objectives in a complex manufacturing environment

Paul Cayo, Sinan Onal

12-02-2020 | Production Management | Issue 2/2020

Integrated production scheduling and distribution allocation for multi-products considering sequence-dependent setups: a practical application

Nur Aini Masruroh, Hanifa Astofa Fauziah, Sinta Rahmawidya Sulistyo

12-02-2020 | Production Management | Issue 2/2020 Open Access

Continuous modelling of machine tool failure durations for improved production scheduling

B. Denkena, M.-A. Dittrich, L. Keunecke, S. Wilmsmeier

03-12-2019 | Production Process | Issue 2/2020

A comparison of some modified confidence intervals based on robust scale estimators for process capability index

Moustafa Omar Ahmed Abu-Shawiesh, Shipra Banik, B. M. Golam Kibria, Hayriye Esra Akyüz

27-11-2019 | Production Process | Issue 2/2020

Contact pressure, slip-rate, and temperature dependent friction analysis regarding damage free deep drawing of stainless steel

Thomas Bergs, Daniel Trauth, Matthias Nick, Rafael Hild

09-12-2019 | Production Process | Issue 2/2020

Ball end micro milling of areal material measures: influence of the tilt angle on the resulting surface topography

K. Klauer, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich

08-01-2020 | Production Process | Issue 2/2020

Assessment of tool holder performance in roughing with end mills

Process dynamics and surface formation
Oliver Rosenthal, Wolfgang Hintze, Carsten Möller

29-01-2020 | Production Process | Issue 2/2020 Open Access

Analysis of incremental die bending of wires and tubes

Viktor Holstein, Matthias Hermes, A. Erman Tekkaya

Current Publications

Premium Partners

    Image Credits