Skip to main content


Production Engineering

Production Engineering 5/2021

Issue 5/2021

Table of Contents ( 12 Articles )

01-05-2021 | Assembly | Issue 5/2021

Study on the balance between FSW parameters and heat treatment for an optimized Al2024-T8 joint: microstructural and tensile evaluations

S. Yousefi Shivyari, A. Hosseini Monazzah

08-04-2021 | Computer Aided Engineering | Issue 5/2021 Open Access

Predicting regenerative chatter in milling with hardware-in-the-loop simulation using a dexel-based cutting model

Sascha Röck

08-05-2021 | Production Management | Issue 5/2021 Open Access

Predicting performance indicators with ANNs for AI-based online scheduling in dynamically interconnected assembly systems

Amon Göppert, Leon Mohring, Robert H. Schmitt

22-03-2021 | Production Management | Issue 5/2021 Open Access

A comprehensive KPI network for the performance measurement and management in global production networks

B. Verhaelen, F. Mayer, S. Peukert, G. Lanza

10-04-2021 | Production Management | Issue 5/2021

An alternative for improving setup times and time between failures aiming at manufacturing lead time reduction

Marcel Heimar Ribeiro Utiyama, Moacir Godinho Filho, Pedro Carlos Oprime

09-04-2021 | Production Management | Issue 5/2021 Open Access

Reducing energy costs and CO2 emissions by production system energy flexibility through the integration of renewable energy

Sergio Materi, Antonio D’Angola, Diana Enescu, Paolo Renna

21-04-2021 | Production Process | Issue 5/2021 Open Access

Real-time stiffness compensation and force control of cooperating robots in robot-based double sided incremental sheet forming

Dennis Möllensiep, Timo Gorlas, Philipp Kulessa, Bernd Kuhlenkötter

09-04-2021 | Production Process | Issue 5/2021

Reusable unit process life cycle inventory (UPLCI) for manufacturing: laser powder bed fusion (L-PBF)

Erick Ramirez-Cedillo, Erika García-López, Leopoldo Ruiz-Huerta, Ciro A. Rodriguez, Hector R. Siller

31-03-2021 | Production Process | Issue 5/2021 Open Access

High performance peel grinding of steel shafts using coarse electroplated CBN grinding wheels

B. Denkena, A. Krödel, M. Wilckens

11-04-2021 | Production Process | Issue 5/2021 Open Access

Analysis of batch asymmetry and batch line position for the decision support in the glass melting process

Maciej Klemiato, Paweł Rotter, Andrzej Skowiniak

27-03-2021 | Production Process | Issue 5/2021

Blank shape optimization in the deep drawing process by sun method

Hamidreza Gharehchahi, Mohammad Javad Kazemzadeh-Parsi, Ahmad Afsari, Mehrdad Mohammadi

03-05-2021 | Production Process | Issue 5/2021

Experimental study of single grit scratch test on carbon fiber-reinforced polyether ether ketone

Mohammad Khoran, Bahman Azarhoushang, Amir Daneshi

Current Publications

Premium Partners

    Image Credits