Skip to main content
main-content
Top

Journal

Production Engineering

Production Engineering 6/2021

Issue 6/2021

Table of Contents ( 13 Articles )

24-05-2021 | Computer Aided Engineering | Issue 6/2021 Open Access

Modeling of cutting forces in trochoidal milling with respect to wear-dependent topographic changes

Jim A. Bergmann, Nils Potthoff, Tobias Rickhoff, Petra Wiederkehr

11-06-2021 | Correction | Issue 6/2021

Correction to: Modeling of cutting forces in trochoidal milling with respect to wear-dependent topographic changes

Jim A. Bergmann, Nils Potthoff, Tobias Rickhoff, Petra Wiederkehr

05-06-2021 | Computer Aided Engineering | Issue 6/2021

A hybrid modeling methodology for cyber physical production systems: framework and key techniques

Jing Ma, Qiang Wang, Zengqiang Jiang, Zhibiao Zhao

19-07-2021 | Machine Tool | Issue 6/2021 Open Access

Acceleration-based disturbance compensation for elastic rack-and-pinion drives

Felix Brenner, Armin Lechler, Alexander Verl

13-07-2021 | Production Management | Issue 6/2021

Integrated forward and reverse logistics in cloud manufacturing: an agent-based multi-layer architecture and optimization via genetic algorithm

Simin Hamidi Moghaddam, Hossein Akbaripour, Mahmoud Houshmand

19-06-2021 | Production Process | Issue 6/2021 Open Access

Data based model predictive control for ring rolling

Rémi Lafarge, Sebastian Hütter, Marc Tulke, Thorsten Halle, Alexander Brosius

20-05-2021 | Production Process | Issue 6/2021 Open Access

Influence of cutting parameters on mechanisms causing slug pulling

Alexander Kindsmüller, Agnes Schrepfer, Jens Stahl, Isabella Pätzold, Anian Nürnberger, Roland Golle, Wolfram Volk

13-05-2021 | Production Process | Issue 6/2021 Open Access

Using tool wear to increase process stability when milling Al7075 and AISI 4140+QT

Berend Denkena, Alexander Krödel, Andreas Relard

10-05-2021 | Production Process | Issue 6/2021 Open Access

Analysis of salts for use as support structure in metal material jetting

Benedikt Kirchebner, Christoph Rehekampff, Martin Tröndle, Philipp Lechner, Wolfram Volk

02-07-2021 | Production Process | Issue 6/2021 Open Access

Path velocity planning for a forming process of fiber-reinforced thermoplastic with six degree of freedom

Birk Wonnenberg, Klaus Dröder

22-05-2021 | Production Process | Issue 6/2021 Open Access

Investigation of the effect of residual stresses in the subsurface on process forces for consecutive orthogonal cuts

F. Wöste, J. Kimm, J. A. Bergmann, W. Theisen, P. Wiederkehr

16-07-2021 | Quality Assurance | Issue 6/2021

Micro-computed tomography to analyze industrial die-cast Al-alloys and examine impregnation polymer resin as a casting cavity sealant

Natsuto Soga, Ajith Bandara, Koichi Kan, Akifumi Koike, Toru Aoki

01-07-2021 | Quality Assurance | Issue 6/2021 Open Access

Inspection planning by defect prediction models and inspection strategy maps

Elisa Verna, Gianfranco Genta, Maurizio Galetto, Fiorenzo Franceschini

Current Publications

Premium Partners

    Image Credits