Skip to main content
Register
Springer Professional
SEARCH
Menu 1 2 3 4
Top

Hint

Swipe to navigate through the articles of this issue

Published in: Metallurgist 5-6/2022

04-10-2022

Production of Steel 26KHMFBA Continuously-Cast Billets for Casing Pipes Using Barium-Containing Master Alloy

Authors: D. V. Rutskii, V. V. Morozov, N. A. Zyuban, M. V. Kirilichev, M. S. Nikititin, R. M. Voitenko, V. O. Kharlamov

Published in: Metallurgist | Issue 5-6/2022

Login to get access
share
SHARE

Abstract

Results are provided for a study showing the effect of Ca- and Ba-containing master alloys on composition and contamination with non-metallic inclusions during extra-furnace treatment and casting (ladlefurnace → evacuation → continuous casting) of steel 26KhMFBa. It is shown that the use of SK30wire master alloy after evacuation, leads to incomplete modification of refractory aluminate inclusions. Use of SKBa15Rwire master alloy before evacuation leads to maximum reduction in overall contamination with readily melting inclusions. Successive treatment with SKBa15Rwire and SK30wire after evacuation leads to maximum reduction in refractory aluminate inclusions. Presence of low-melting inclusions is preferable since this type of inclusion is not deposited on the walls of a pouring nozzle and does not adversely affect contamination of continuous casting machines and products obtained from them. Evaluation of the quality of continuously-cast billet metal shows that use of a Ba-containing master alloy makes it possible to prepare a continuously-cast billet with maximum contamination by inclusions not exceeding 1.0 points.
previous article Influence of Tool Steel Chemical Composition on Structure and Phase Composition of a Diffusion Layer after Microarc Boriding
next article Study of Physical and Mechanical Properties of Nickel-Beryllium Alloy 97NL-VI Cold-Rolled Strip

To get access to this content you need the following product:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt 90 Tage mit der neuen Mini-Lizenz testen!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe



 


Jetzt 90 Tage mit der neuen Mini-Lizenz testen!

inform now
Literature
1.
A. A. Safronov, V. I. Tazetdinov, and G. V. Torokhov, “Bases of producing CCB 500 mm in diameter of pipe grade steel in CBCM No.2 in ÉSPK Green ozone No. 32,” Stal’, No. 10, 58–62 ((2015).
2.
D. A. Dyudkin, V. V. Kisilenko, and A. N. Smirnov, Steel Production Vol. 4, Metal Continuous Casting [in Russian], Teplotekhnik, Moscow (2009).
3.
S. Kittaka, T. Kaniki, K. Watanabe, and Y. Miura, “MultiMode EMS for slab casters — recent improvements and new applications,” Nippon Steel Technical Report, No. 86, 68–73 (2002).
4.
A. P. Belyi, Central Segregation Inhomogeneity in Continuous Sheet Workpieces and Thick Sheet Rolled Product [in Russian], Metallurgizdat, Moscow (2005).
5.
М. Yu. Chubukov, D. V. Rutskiy, and D. P. Uskov, “Analyzing the features of non-metallic inclusion distribution in ϕ410 mm continuously cast billets of low carbon steel grades,” Materials Science Forum. 2019. Vol. 973: IX Int. Sci. and Techn. Conf. on Engineering — Innovation Technol. in Eng.: From Design to Production of Competitive Products (Volgograd, Sept. 2017), Volgograd State Techn. Univ. (2017).
6.
М. Yu. Chubukov, D. V. Rutskii, and N. A. Zyuban, “Investigation of the influence of the chemical composition of tubular steels on the features of the formation of phase constituents during the solidification of continuously cast billets by computer simulation [Electronic source],” Materials Sci. Forum. 2019. Vol. 945: Intern. Scientific Conf. “FarEastСon — Materials and Construction” (Vladivostok, Russian Federation, October 2–4 (2018), pp. 598–602; DOI: https://​doi.​org/​10.​4028/​ www.scientific.net/MSF.945.
7.
M. Yu. Chubukov, D. V. Rustkii, N. A. Zyuban, and M. V. Kirilichev, “Effect of steel chemical composition on features of continuously cast billet structure 410 mm in diameter,” Chernye Metally, No. 4 (1048), 15–21 (2019).
8.
A. Scamarda, “Effect of calcium in Al–Ca-killed “clean” steel,” in: Proc. 7th Europ. Electric Steelmaking Conf. Milano, 2, 101–110 (2002).
9.
D. V. Rutskii, N. A. Zyuban, M. Yu. Chubukov, et al., “Effect of nonmetallic inclusions on pipe steel properties made of steel strength category K48–K52,” Izd. Volg. Tekhn. Univ, No. 7(230), 13–19 (2019).
10.
A. V. Dub, N. V. Barulenkova, T. V. Morozova, S. V. Efimov, V. N. Filatov, S. D. Zinchenko, and A. M. Lamukhin, “Nonmetallic inclusions in low-alloy pipe steel,” Metallurg, No. 4, 67–73 (2005).
11.
A. I. Zaistev, A. V. Knyazev, A. V. Amezhnov, A. V. Koldaev, and A. B. Stepanov, “Effect of nonmetallic inclusions and impurities on properties, quality characteristics of round rolled product of special alloy steels,” Metallurg, No. 8, 69–74 (2017).
12.
I. G. Rodionova, O. N. Baklanova, A. V. Amezhnov, A. V. Knyazev, A. I. Zaitsev, and M, V. Feoktistova, “Effect of nonmetallic inclusions on corrosion resistance of carbon low-alloy steels for oil industry pipelines,” Stal’, No. 10, 41–48 (2017).
13.
G. I. Kotel’nikov, D. A. Movenko, A. V. Pavlov, et al., “Model of tensile and compressive stress distribution within metal around calcium-containing nonmetallic inclusions in aqueous media,” Izv. Vuz. Chern. Met., No. 3, 1016 (2014).
14.
V. S. Dub. A. A. Safronov, M. A. Movchan, et al., “Effect of extra-furnace treatment technology on type of nometallic inclusions formed and steel corrosion rsistanec,” Élektromet., No. 5, 3–15 (2016).
15.
S. P. Gamanyuk, N. A. Zyuban, D. V. Rutskii, and A. N. Anan’eva, “Study of the effect of deoxidation regime on formation and location of sulfides in medium-carbon structural steels,” Stal’, No. 2, 15–19 (2017).
16.
D. V. Rutskii, G. V. Babin, S. P. Gamanyuk, et al., “Optimum composition and amount of nonmetallic inclusions in a continuouslycast billet based on melt deoxidation with aluminum and calcium carbide,” Metallurg, No. 4, 41–48 (2019).
17.
A. A. Safronov, V. S. Dub, V. V. Orlov, et al., “Control of oxide nonmetallic inclusions and formation in Al 2O 3–CaO–Mg system during production of pipe steels for equipping contemporary metallurgical complexes,” Stal’, No. 2, 13–20 (2019)
18.
D. V. Rutskii, N. A. Zyuban, I. V. Neklyudov, and A. Yu. Agarkov, “Effect of calcium carbide as deoxidizing agent on chemical composition and contamination by nonmetallic inclusions,” Chernye Metally, No. 5(1049), 15–21 (2019).
19.
J. Z. Li, M. Jiang, X. F. He, et al., “Investigation on nonmetallic inclusions in ultra-low oxygen special steels,” MMTB, 47, 2386–2399 (2016). CrossRef
20.
K. V. Grigorovich, K. Yu. Deminm, A. M. Arsenkin, and A. K. Graber, “Prospects of using barium-containing master alloy for deoxidizing and modifying transported metal,” Metally, No. 5, 146–156 (2011).
21.
L. A. Smirnov, V. A. Rovnushkin, A. S. Oryshchenlko, et al., “Steel and alloy modification with various elements,” Metallurg, No. 11, 57–63 (2015).
22.
V. G. Miltutz, V. V. Tsulanov, V. Yu. Levagin, and V. A. Golubtsov, “Effect of treatment with barium-containing microcrystalline modifiers on high-strength shipbuilding steel quality,” Vopr. Materialoved., No. 1(77), 5–10 (2014).
23.
G. G. Mikhailov, L. A. Markovets, and D. S. Vydrin, “Barium as a molten steel deoxidizer and modifier,” Vestn. YuRGU, Ser. Metallurgiya, No. 1, 50–56 (2013).
24.
A. A. Klachkov, A. A. Pecheritsa, I. V. Nekludov, and D G. Eanskii, “Nonmetallic inclusions in continuously-cast billet of boiler steel 20K with modification by calcium,” Élektromet., No. 2, 7–10 (2007).
25.
K. N. Vdovin and N. A. Feoktistov, “Effect of treating steel 25L with silicocalcium on cast billet nonmetallic inclusion content and mechanical properties,” Tekhnol. Metallov, No. 12, 21–26 (2012).
26.
D. V. Rutskii, N. A. Zyuban, M. V. Kirilichev, and M. S. Nikitin, “Effect of extra-furnace treatment on contamination by nonmetallic inclusions during melting steel 25KhMFBA,” Stal’, No. 7, 17–21 (2021).
27.
I. V. Ryabchikov, V. G. Mizin, and V. V. Andreev, Silica Ferroalloys and New Generation of Modifiers. Production and Application [in Russian], Izd. Chelyabinsk. Gos. Univ., Chelyabisnk (2013).
28.
V. A. Golubtsov and I. V. Ryachikov, “Increase in steel quality by a broad range of modifiers,” Chernye Met., No. 6, 21–29 (2015).
29.
Y. E. Guozhu, P. Jonnsson, and T. Lund, “Thermodynamics and kinetics of the modification of Al 2О 3,” ISIJ Intern., 36, Supplement, S105–S108 (1996).
30.
B. F. Belov, I. V. Ryabchikov, I. V. Bakin, V. G. Mizin, and A. Ya. Babanin, “Material deoxidation with two multi-component alkali metal earth metal alloys,” Stal’, No. 7, 14–18 (2020).
31.
A. A. Deryabin, V. V. Pavlov, V. V. Mobil’nyi, L. A. Godik, V. S. Teepelev, V. V. Konshakov, V. V. Gorkabenko, and E. Yu. Berestov, “Efficiency of rail steel modification nanotechnology with barium,” Stal, No. 11, 134–1141 (2007).
32.
V. A. Golubtsov, K. Yu. Demin, Yu. S. Demin, A. G. Shub, and I. V. Ryabchikov, “Use of complex barium-containing modifiers for improving wheel steel quality” Stal’, No. 12, 17–22 (2009).
33.
A. V. Golubtsov, Theory and Practice of Making Additions to Steel Outside a Furnace [in Russian], Chelyabinsk (2006).
34.
A. Kazakov, P. Kovalev, and S. Ryaboshuk, “Metallurgical expertise as the base for determination of nature of defects in metal products,” CIS Iron and Steel Review, No. 1-2, 7–13 (2007).
35.
A. Yu. Agarkov, D. V. Rutskii, N. A. Zyuban, and G. V. Babon, “Effect of melt treatment by wire with ca- and Ba-fillers on the phase composition and contamination by nonmetallic inclusions during extra-furnace treatment and pouring steel 25KhMFBA,” Chern. Metally, No. 12, 36–43 (2021).
36.
B. Song, Q. Han, and C. Zhang, “Solubility of Ba in liquid iron and interaction effect of the third elements,” J. of University of Sci. and Technol. Beijing, 7, No. 2, 82–85 (2000).
37.
D. A. Sponseller and R. A. Flinn, “The solubility of calcium in liquid iron and third element interaction affect,” Trans. AIME, 239, 876–887 (1964).
Metadata
Title
Production of Steel 26KHMFBA Continuously-Cast Billets for Casing Pipes Using Barium-Containing Master Alloy
Authors
D. V. Rutskii
V. V. Morozov
N. A. Zyuban
M. V. Kirilichev
M. S. Nikititin
R. M. Voitenko
V. O. Kharlamov
Publication date
04-10-2022
Publisher
Springer US
Published in
Metallurgist / Issue 5-6/2022
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-022-01359-2

Other articles of this Issue 5-6/2022

Metallurgist 5-6/2022 Go to the issue

OriginalPaper

Features of Behavior of Persian Damascus Steel of Xviii Century and Contemporary Damascus Steel With Cyclic Loading

OriginalPaper

Analysis of Factors Determining Aspects of Deformation and Hardening of Bronze BrNHK2.5–0.7–0.6

OriginalPaper

Computer Simulation of a New Two-Threaded Roll Pass Design for Rolling 100 mm Grinding Balls Made of Alloyed Steels

OriginalPaper

Technology for Producing Aluminum-Matrix Composite Material Reinforced with Multi-Wall Carbon Nanotubes

OriginalPaper

Tekhnogen-Invest Software Program for Assessing the Effectiveness of Recycling Techogenic Formations of the Ferroalloy Production. Part 2

OriginalPaper

Improved Manipulator for Maintenance of the Cassette Gates of Steel-Pouring Ladles

Premium Partners

in-adhesives MKVS Hellmich GmbH Krahn Ceramics
    Image Credits