Skip to main content


Progress in Additive Manufacturing

Progress in Additive Manufacturing 1/2021

Issue 1/2021

Table of Contents ( 13 Articles )

06-02-2021 | Editorial | Issue 1/2021

Editorial PIAM January 2021

Eujin Pei

13-05-2020 | Review Article | Issue 1/2021

Advances in modeling transport phenomena in material-extrusion additive manufacturing: Coupling momentum, heat, and mass transfer

Arit Das, Claire McIlroy, Michael J. Bortner

24-11-2020 | Review Article | Issue 1/2021

The role of 3D printing during COVID-19 pandemic: a review

Guilherme Arthur Longhitano, Guilherme Bitencourt Nunes, Geovany Candido, Jorge Vicente Lopes da Silva

03-06-2020 | Full Research Article | Issue 1/2021

First report on fabrication and characterization of soybean hull fiber: polymer composite filaments for fused filament fabrication

Vamsi Krishna Balla, Jogi Ganesh Dattatreya Tadimeti, Kavish Sudan, Jagannadh Satyavolu, Kunal H. Kate

08-07-2020 | Full Research Article | Issue 1/2021

FingerMap: a new approach to predict soft material 3D objects printability

Alix Lopez, Christophe A. Marquette, Edwin-Joffrey Courtial

19-08-2020 | Full Research Article | Issue 1/2021

Effect of FDM process parameters on mechanical properties of 3D-printed carbon fibre–PLA composite

M. Kamaal, M. Anas, H. Rastogi, N. Bhardwaj, A. Rahaman

13-08-2020 | Full Research Article | Issue 1/2021 Open Access

The influence of stiffener geometry on flexural properties of 3D printed polylactic acid (PLA) beams

Silas Z. Gebrehiwot, L. Espinosa Leal, J. N. Eickhoff, L. Rechenberg

25-08-2020 | Full Research Article | Issue 1/2021

Tailoring properties of photopolymers for additive manufacturing with mixture design

Janez Slapnik, Irena Pulko

10-09-2020 | Full Research Article | Issue 1/2021

Mathematical design and preliminary mechanical analysis of the new lattice structure: “GE-SEZ*” structure processed by ABS polymer and FDM technology

Mostapha El Jai, Nourddin Saidou, M’hamed Zineddine, Housseine Bachiri

12-09-2020 | Full Research Article | Issue 1/2021

Impact strength of 3D printed PLA using open source FFF-based 3D printer

Shilpesh R. Rajpurohit, Harshit K. Dave

26-09-2020 | Full Research Article | Issue 1/2021

Preliminary investigation into metal-material extrusion

Shane Terry, Ismail Fidan, Khalid Tantawi

02-01-2021 | Full Research Article | Issue 1/2021

Modelling and evolutionary computation optimization on FDM process for flexural strength using integrated approach RSM and PSO

Mohd Sazli Saad, Azuwir Mohd Nor, Mohd Zakimi Zakaria, Mohamad Ezral Baharudin, Wan Sallha Yusoff

04-01-2021 | Full Research Article | Issue 1/2021

Multi-objective optimization of machining factors on surface roughness, material removal rate and cutting force on end-milling using MWCNTs nano-lubricant

I. P. Okokpujie, O. S. Ohunakin, C. A. Bolu

Current Publications

Premium Partners

    Image Credits