Skip to main content
main-content
Top

Journal

Progress in Additive Manufacturing

Progress in Additive Manufacturing 2/2020

Issue 2/2020

Table of Contents ( 13 Articles )

28-04-2020 | Editorial | Issue 2/2020

Editorial PIAM April 2020

Eujin Pei

08-11-2019 | Review Article | Issue 2/2020 Open Access

A review on the use of additive manufacturing to produce lower limb orthoses

Mohammed S. Alqahtani, Abdulsalam Al-Tamimi, Henrique Almeida, Glen Cooper, Paulo Bartolo

24-02-2020 | Review Article | Issue 2/2020

Structural optimisation for medical implants through additive manufacturing

Abdulsalam Abdulaziz Al-Tamimi, Henrique Almeida, Paulo Bartolo

21-03-2020 | Review Article | Issue 2/2020 Open Access

Current formulation approaches in design and development of solid oral dosage forms through three-dimensional printing

Carlo Curti, Daniel J. Kirby, Craig A. Russell

01-02-2020 | Full Research Article | Issue 2/2020

A design framework for build process planning in DMLS

Syed Shahid Mustafa, Ismail Lazoglu

02-01-2020 | Full Research Article | Issue 2/2020

Extruded diameter dependence on temperature and velocity in the fused deposition modeling process

Mouhamadou Mansour Mbow, Philippe Rene Marin, Franck Pourroy

16-10-2019 | Full Research Article | Issue 2/2020

Development of additively manufacturable and electrically conductive graphite–polymer composites

Shaheryar A. Khan, Ismail Lazoglu

05-02-2020 | Full Research Article | Issue 2/2020

A mechanical model in wire + Arc additive manufacturing process

E. A. Bonifaz, J. S. Palomeque

17-10-2019 | Full Research Article | Issue 2/2020

MP Welding of dissimilar materials: AM laser powder-bed fusion AlSi10Mg to wrought AA6060-T6

V. Shribman, M. Nahmany, S. Levi, O. Atiya, D. Ashkenazi, A. Stern

18-03-2020 | Full Research Article | Issue 2/2020

Hybrid layered manufacturing of a bimetallic injection mold of P20 tool steel and mild steel with conformal cooling channels

Sajan Kapil, Fisseha Legesse, Seema Negi, K. P. Karunakaran, Swarup Bag

13-03-2020 | Full Research Article | Issue 2/2020

Quality and productivity trade-off in powder-bed additive manufacturing

Huseyin Kose, Mingzhou Jin, Tao Peng

18-03-2020 | Full Research Article | Issue 2/2020

Post-yield performance of additive manufactured cellular lattice structures

Y. Ibrahim, C. M. Davies, C. Maharaj, Z. Li, J. P. Dear, P. A. Hooper

03-10-2019 | Full Research Article | Issue 2/2020

Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturing

Yusuf Kaynak, Emre Tascioglu

Current Publications

Premium Partners

    Image Credits