Skip to main content
main-content
Top

Journal

Progress in Additive Manufacturing

Progress in Additive Manufacturing 4/2020

Issue 4/2020

Table of Contents ( 11 Articles )

09-11-2020 | Editorial | Issue 4/2020

Editorial PIAM October 2020

Eujin Pei

20-07-2020 | Short Communication | Issue 4/2020 Open Access

Standardisation efforts of ISO/TC 261 “Additive Manufacturing”: Reports from 14th and 15th Plenary Meeting

Eujin Pei

09-07-2020 | Review Article | Issue 4/2020

A comprehensive review: metrology in additive manufacturing and 3D printing technology

Hitesh D. Vora, Subrata Sanyal

20-06-2020 | Full Research Article | Issue 4/2020

Effective elastic properties of additively manufactured metallic cellular structures using numerical unit-cell homogenization

Okanmisope Fashanu, David Murphy, Myranda Spratt, Joseph Newkirk, K. Chandrashekhara, Ben Brown, John Porter

19-06-2020 | Full Research Article | Issue 4/2020

Monitoring and detection of meltpool and spatter regions in laser powder bed fusion of super alloy Inconel 625

Lihang Yang, Lydia Lo, Sijie Ding, Tuğrul Özel

13-06-2020 | Full Research Article | Issue 4/2020

Effect of heat treatment time on the microstructure and mechanical deformation behavior of additive-manufactured AlSi10Mg components

Velaphi Jeffrey Matjeke, Collin Moopanar, Amogelang Sylvester Bolokang, Josias Willem van der Merwe

08-05-2020 | Full Research Article | Issue 4/2020

Spherical slicing method and its application on robotic additive manufacturing

Ismail Enes Yigit, I. Lazoglu

25-04-2020 | Full Research Article | Issue 4/2020

Gold plating of AlSi10Mg parts produced by a laser powder-bed fusion additive manufacturing technique

Alexandra Inberg, Dana Ashkenazi, Giora Kimmel, Yosi Shacham-Diamand, Adin Stern

18-04-2020 | Full Research Article | Issue 4/2020

Process gas influence on microstructure and mechanical behavior of Inconel 718 fabricated via selective laser melting

Glenn E. Bean, David B. Witkin, Tait D. McLouth, Rafael J. Zaldivar

04-05-2020 | Correction | Issue 4/2020

Correction to: Effect of process parameters on surface roughness of hybrid investment casting

Parlad Kumar, Inderpreet S. Ahuja, Rupinder Singh

02-09-2020 | Correction | Issue 4/2020

Correction to: The influence of stiffener geometry on flexural properties of 3D-printed polylactic acid (PLA) beams

Silas Z. Gebrehiwot, Leonardo Espinosa-Leal, J. N. Eickhof, L. Rechenberg

Current Publications

Premium Partners

    Image Credits