Skip to main content
main-content
Top

Hint

Swipe to navigate through the chapters of this book

2020 | OriginalPaper | Chapter

Proposal and Test Run of Wheel Slip Stabilizing Control

Authors: Shingo Makishima, Michiyasu Okubo, Masashi Takagi

Published in: Advances in Dynamics of Vehicles on Roads and Tracks

Publisher: Springer International Publishing

share
SHARE

Abstract

This paper proposes and demonstrates a novel slip stabilizing control method for electric railway vehicles to achieve both high acceleration and riding comfort. The control method squeezes the torque command of traction motors generated by a feed-forward slip acceleration control in order to stabilize wheel slips. The controller stabilizes wheel velocity during wheel slips and avoids diverging of wheel slipping that can cause vibrations, noises or wheel and rail damage. The method also achieves slower re-adhesion with less longitudinal shock. The test run results show that the method achieves both higher acceleration and better riding comfort than the conventional re-adhesion control method.
Literature
1.
go back to reference Kadowaki, S., Ohishi, K., Hata, T., Iida, N., Takagi, M., Sano, T., Yasukawa, S.: Antislip readhesion control based on speed-sensorless vector control and disturbance observer for electric commuter train—series 205-5000 of the east Japan railway company. IEEE Trans. Ind. Electron. 54(4), 2001–2008 (2007) CrossRef Kadowaki, S., Ohishi, K., Hata, T., Iida, N., Takagi, M., Sano, T., Yasukawa, S.: Antislip readhesion control based on speed-sensorless vector control and disturbance observer for electric commuter train—series 205-5000 of the east Japan railway company. IEEE Trans. Ind. Electron. 54(4), 2001–2008 (2007) CrossRef
2.
go back to reference Boiteux, M.: Le problème de I’adhérence en freinage. Revue générale des chemins de fer, no. 105, pp. 59–72 (1986) Boiteux, M.: Le problème de I’adhérence en freinage. Revue générale des chemins de fer, no. 105, pp. 59–72 (1986)
3.
go back to reference Voltr, P., Lata, M.: Transient wheel–rail adhesion characteristics under the cleaning effect of sliding. Veh. Syst. Dyn. 53(5), 605–618 (2015) CrossRef Voltr, P., Lata, M.: Transient wheel–rail adhesion characteristics under the cleaning effect of sliding. Veh. Syst. Dyn. 53(5), 605–618 (2015) CrossRef
4.
go back to reference Meacci, M., Shi, Z., Butini, E., Marini, L., Meli, E., Rindi, A.: A new local degraded adhesion model for railway applications including energy dissipation and adhesion recovery. In: The Proceedings of 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2018), pp. 711–719 (2018) Meacci, M., Shi, Z., Butini, E., Marini, L., Meli, E., Rindi, A.: A new local degraded adhesion model for railway applications including energy dissipation and adhesion recovery. In: The Proceedings of 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2018), pp. 711–719 (2018)
5.
go back to reference Ohyama, T., Uchida, S.: Behavior of traction force between wheel and rail from microslip to gross sliding: some experiments under water lubrication with static and dynamic contact loads. Trans. JSME Series C 60(574), 2096–2102 (1994). (in Japanese) CrossRef Ohyama, T., Uchida, S.: Behavior of traction force between wheel and rail from microslip to gross sliding: some experiments under water lubrication with static and dynamic contact loads. Trans. JSME Series C 60(574), 2096–2102 (1994). (in Japanese) CrossRef
6.
go back to reference Chen, H., Tanimoto, H.: Influence of surface roughness and temperature on the adhesion of wheel and rail in wet conditions. QR RTRI 56(3), 206–211 (2015) CrossRef Chen, H., Tanimoto, H.: Influence of surface roughness and temperature on the adhesion of wheel and rail in wet conditions. QR RTRI 56(3), 206–211 (2015) CrossRef
7.
go back to reference Sato, M., Teramoto, K., Ohishi, K., Makishima, S., Uezono, K., Yasukawa, S.: Anti-slip re-adhesion control for trains based on slip acceleration. IEEJ Trans. IA 133(6), 577–587 (2013). (in Japanese) CrossRef Sato, M., Teramoto, K., Ohishi, K., Makishima, S., Uezono, K., Yasukawa, S.: Anti-slip re-adhesion control for trains based on slip acceleration. IEEJ Trans. IA 133(6), 577–587 (2013). (in Japanese) CrossRef
Metadata
Title
Proposal and Test Run of Wheel Slip Stabilizing Control
Authors
Shingo Makishima
Michiyasu Okubo
Masashi Takagi
Copyright Year
2020
DOI
https://doi.org/10.1007/978-3-030-38077-9_56

Premium Partner