Skip to main content
Top

2017 | OriginalPaper | Chapter

Rapid Manufacturing of Customized Surgical Cutting Guide for the Accurate Resection of Malignant Tumour in the Mandible

Authors : Sandeep W. Dahake, Abhaykumar M. Kuthe, Mahesh B. Mawale, Ashutosh D. Bagde

Published in: Advances in 3D Printing & Additive Manufacturing Technologies

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

A case report of malignant tumour in mandible is discussed in this paper. The innovative rapid prototyping (RP) assisted customized surgical cutting guide (CSCG) has developed for the accurate resection of the malignant tumour in the mandible. Computer tomography (CT) scan data in DICOM format is utilized for the development of CSCG. Mimics 14.11 used for image processing to develop diseased model. 3Matics 6.0 software is used for the virtual surgical planning (VSP) and computer-aided design (CAD) of customized implant and CSCG. Finally, CSCG developed by using fused deposition modelling (FDM), a technique of rapid prototyping (RP) in ABS material. The testing of the RP assisted CSCG was performed by mutually fixing it on the patient’s diseased model developed by the same RP. This paper describes the novel methodology for the development of the RP assisted CSCG and its application to accurately resect the malignant tumour in the mandible. This approach shows good results in designing and manufacturing of the CSCG. Using advanced tools like VSP, CAD and RP, manufacturing of CSCG for the accurate resection of tumour and placement of customized implant may possible easily in actual surgery.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Arora A, Datarkar A, Borle R, Rai A, Advani D (2013) Custom made implant for maxillofacial defects using rapid prototype models. J Oral Maxillofac Surg 71:e104–e110CrossRef Arora A, Datarkar A, Borle R, Rai A, Advani D (2013) Custom made implant for maxillofacial defects using rapid prototype models. J Oral Maxillofac Surg 71:e104–e110CrossRef
2.
go back to reference Cansiz E, Arslan Y, Turan F, Atalay B (2013) Design and production of a novel computer assisted patient specific sagittal split osteotomy guide and soft tissue retractor. J Med Biol Eng Cansiz E, Arslan Y, Turan F, Atalay B (2013) Design and production of a novel computer assisted patient specific sagittal split osteotomy guide and soft tissue retractor. J Med Biol Eng
3.
go back to reference Dérand P, Rännar L, Hirsch J (2012) Imaging, virtual planning, design, and production of patient-specific implants and clinical validation in craniomaxillofacial surgery. Craniomaxillofacial Trauma Reconstruct 5(3):137–144CrossRef Dérand P, Rännar L, Hirsch J (2012) Imaging, virtual planning, design, and production of patient-specific implants and clinical validation in craniomaxillofacial surgery. Craniomaxillofacial Trauma Reconstruct 5(3):137–144CrossRef
4.
go back to reference Fantini M, Crescenzio F, Ciocca L (2013) Design and manufacturing of customized surgical devices for mandibular rehabilitation. Int J Interact Des Manuf 7:227–237CrossRef Fantini M, Crescenzio F, Ciocca L (2013) Design and manufacturing of customized surgical devices for mandibular rehabilitation. Int J Interact Des Manuf 7:227–237CrossRef
5.
go back to reference Hsu S, Gateno J, Bell R, Hirsch D, Markiewicz M, Teichgraeber J, Zhou X, Xia J (2013) Accuracy of a computer-aided surgical simulation protocol for orthognathic surgery: A prospective multicenter study. J Oral Maxillofac Surg 71:128–142CrossRef Hsu S, Gateno J, Bell R, Hirsch D, Markiewicz M, Teichgraeber J, Zhou X, Xia J (2013) Accuracy of a computer-aided surgical simulation protocol for orthognathic surgery: A prospective multicenter study. J Oral Maxillofac Surg 71:128–142CrossRef
6.
go back to reference Logan H, Wolfaardt J, Boulanger P, Hodgetts B, Seikaly H (2013) Exploratory benchtop study evaluating the use of surgical design and simulation in fibula free flap mandibular reconstruction. J Otolaryngol—Head Neck Surgery 42(42):1–9 Logan H, Wolfaardt J, Boulanger P, Hodgetts B, Seikaly H (2013) Exploratory benchtop study evaluating the use of surgical design and simulation in fibula free flap mandibular reconstruction. J Otolaryngol—Head Neck Surgery 42(42):1–9
7.
go back to reference Lu S, Zhang Y, Shi J, Chen Y, Xu X (2012) Accuracy and efficacy of thoracic pedicle screws in scoliosis with patient-specific drill template. Med Biol Eng Comput 50:751–758CrossRef Lu S, Zhang Y, Shi J, Chen Y, Xu X (2012) Accuracy and efficacy of thoracic pedicle screws in scoliosis with patient-specific drill template. Med Biol Eng Comput 50:751–758CrossRef
8.
go back to reference Oliveira M, Hussain N, Dias A, Lopes M, Azevedo L, Zenha H, Costa H, Santos J (2008) 3-D biomodelling technology for maxillofacial reconstruction. Mater Sci Eng, C 28:1347–1351CrossRef Oliveira M, Hussain N, Dias A, Lopes M, Azevedo L, Zenha H, Costa H, Santos J (2008) 3-D biomodelling technology for maxillofacial reconstruction. Mater Sci Eng, C 28:1347–1351CrossRef
9.
go back to reference Polley J, Figueroa A (2013) Orthognathic positioning system: intraoperative system to transfer virtual surgical plan to operating field during orthognathic surgery. J Oral Maxillofac Surg 71(5):911–920CrossRef Polley J, Figueroa A (2013) Orthognathic positioning system: intraoperative system to transfer virtual surgical plan to operating field during orthognathic surgery. J Oral Maxillofac Surg 71(5):911–920CrossRef
10.
go back to reference Schepers R, Raghoebar G, Lahoda L, Meer W, Roodenburg J, Vissink A, Reintsema H, Witjes M (2012) Full 3-D digital planning of implant-supported bridges in secondary mandibular reconstruction with prefabricated fibula free flaps. Head Neck Oncol 4(2):1–6 Schepers R, Raghoebar G, Lahoda L, Meer W, Roodenburg J, Vissink A, Reintsema H, Witjes M (2012) Full 3-D digital planning of implant-supported bridges in secondary mandibular reconstruction with prefabricated fibula free flaps. Head Neck Oncol 4(2):1–6
Metadata
Title
Rapid Manufacturing of Customized Surgical Cutting Guide for the Accurate Resection of Malignant Tumour in the Mandible
Authors
Sandeep W. Dahake
Abhaykumar M. Kuthe
Mahesh B. Mawale
Ashutosh D. Bagde
Copyright Year
2017
Publisher
Springer Singapore
DOI
https://doi.org/10.1007/978-981-10-0812-2_12

Premium Partners