Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Metallurgical and Materials Transactions A
Published in: Metallurgical and Materials Transactions A 11/2017

16-08-2017

Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy

Authors: Arijit Lodh, Tawqeer Nasir Tak, Aditya Prakash, P. J. Guruprasad, Christopher Hutchinson, Indradev Samajdar

Published in: Metallurgical and Materials Transactions A | Issue 11/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Interrupted tensile tests were coupled with ex situ measurements of residual stress and microtexture. The residual stress quantification involved measurements of six independent Laue spots and conversion of the interplanar spacings to the residual stress tensor. A clear orientation-dependent residual stress evolution emerged from the experiments and the numerical simulations. For the orientations undergoing negligible changes in ρ GND (density of geometrically necessary dislocation), the residual stress developments appeared to be governed by the elastic stiffness of the grain clusters. For the others, the evolution of the residual stress and ρ GND exhibited a clear orientation-dependent scaling.
previous article Kinetics of the fcc → hcp Phase Transformation in Cu-Ge Solid Solutions Upon Isothermal Aging
next article Effect of Extrusion Temperature on the Plastic Deformation of an Mg-Y-Zn Alloy Containing LPSO Phase Using In Situ Neutron Diffraction

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Bert Verlinden, Julian Driver, Indradev Samajdar and Roger D Doherty: Thermo-mechanical processing of metallic materials. (Elsevier, Oxford , 2007).
2.
3.
Ladislas P Kubin, Materials science and technology 1993, vol. 6, pp. 137-190.
4.
LP Kubin, C Fressengeas and G Ananthakrishna, Dislocations in solids 2002, vol. 11, pp. 101-192.CrossRef
5.
Yves Brechet and Christopher Hutchinson, Solid State Physics 2006, vol. 60, pp. 181-287.CrossRef
6.
Frederick John Humphreys and Max Hatherly: Recrystallization and related annealing phenomena. (Elsevier, Oxford, 1995).
7.
Niels Hansen, X. Huang and D. A. Hughes, Materials Science and Engineering: A 2001, vol. 317, pp. 3-11.CrossRef
8.
D. A. Hughes, Materials Science and Engineering: A 2001, vol. 319–321, pp. 46-54.CrossRef
9.
10.
GE Dieter, DJ Bacon: Mechanical metallurgy. (McGraw-Hill, New York, 1986).
11.
B.D. Cullity (1978) Elements of ray diffraction. Wesley Publishing, USA
12.
Viktor Hauk: Structural and residual stress analysis by nondestructive methods: Evaluation-Application-Assessment. (Elsevier, Oxford, 1997).
13.
IC Noyan, JB Cohen, Residual stress: measurement by diffraction and interpretation. Springer, New York, 2013.
14.
MN James, DJ Hughes, Z Chen, H Lombard, DG Hattingh, D Asquith, JR Yates and PJ Webster, Engineering Failure Analysis 2007, vol. 14, pp. 384-395.CrossRef
15.
U Lienert, MC Brandes, JV Bernier, J Weiss, SD Shastri, MJ Mills and MP Miller, Materials Science and Engineering: A 2009, vol. 524, pp. 46-54.CrossRef
16.
U Lienert, T-S Han, J Almer, PR Dawson, T Leffers, L Margulies, Søren Fæster Nielsen, HF Poulsen and Søren Schmidt, Acta materialia 2004, vol. 52, pp. 4461-4467.CrossRef
17.
L Margulies, T Lorentzen, HF Poulsen and T Leffers, Acta Materialia 2002, vol. 50, pp. 1771-1779.CrossRef
18.
MP Miller, J-S Park, PR Dawson and T-S Han, Acta materialia 2008, vol. 56, pp. 3927-3939.CrossRef
19.
Charles S. Montross, Tao Wei, Lin Ye, Graham Clark and Yiu-Wing Mai, International Journal of Fatigue 2002, vol. 24, pp. 1021-1036.CrossRef
20.
21.
T Nakamura and S Suresh, Acta Metallurgica et Materialia 1993, vol. 41, pp. 1665-1681.CrossRef
22.
J. Oddershede, S. Schmidt, HF Poulsen, L Margulies, J Wright, M Moscicki, W Reimers, G Winther, Mater. Charact. 2011, vol. 62, pp. 651-660CrossRef
23.
J. Oddershede, S. Schmidt, HF Poulsen, HO Sørensen, J. Wright, W. Reimers, J. Appl. Crystallogr. 2010, vol. 43, pp. 539-549.CrossRef
24.
H Oettel and R Wiedemann, Surface and coatings technology 1995, vol. 76, pp. 265-273.CrossRef
25.
P. Peyre, R. Fabbro, P. Merrien and H. P. Lieurade, Materials Science and Engineering: A 1996, vol. 210, pp. 102-113.CrossRef
26.
SK Shekhawat, R Chakrabarty, V Basavaraj, VD Hiwarkar, KV Mani, PJ Guruprasad, AA Benzerga, KG Suresh and I Samajdar, Acta Materialia 2015, vol. 84, pp. 256-264.CrossRef
27.
PA Turner and CN Tomé, Acta Metallurgica et Materialia 1994, vol. 42, pp. 4143-4153.CrossRef
28.
T Ungar, H Mughrabi, D Rönnpagel and M Wilkens, Acta Metallurgica 1984, vol. 32, pp. 333-342.CrossRef
29.
G. Van Boven, W. Chen and R. Rogge, Acta Materialia 2007, vol. 55, pp. 29-42.CrossRef
30.
Y-D Wang, H Tian, AD Stoica, X-L Wang, PK Liaw, JW Richardson, Nature Materials 2003, vol. 2, pp. 101-106.CrossRef
31.
G. A. Webster and A. N. Ezeilo, International Journal of Fatigue 2001, vol. 23, Supplement 1, pp. 375-383.CrossRef
32.
33.
H.-A. Crostack and W. Reimers: International Conference on Residual Stresses, Springer. 1989. pp. 58–64.
34.
W Reimers, H-A Crostack, M Wrobel and G Eckold, In Measurement of residual and applied stress using neutron diffraction, (Springer, New York, 1992), pp 263-276.CrossRef
35.
36.
Yu Estrin, LS Toth, A Molinari and Y Brechet, Acta materialia 1998, vol. 46, pp. 5509-5522.CrossRef
37.
LE Levine, BC Larson, W Yang, ME Kassner, JZ Tischler, MA Delos-Reyes, RJ Fields, W. Liu, Nature Mater. 2006, vol. 5, pp. 619-622.CrossRef
38.
H Biermann, T Ungar, T Pfannenmüller, G Hoffmann, A Borbely and H Mughrabi, Acta metallurgica et materialia 1993, vol. 41, pp. 2743-2753.CrossRef
39.
F. Corvasce, P. Lipinski and M. Berveiller: International Conference on Residual Stresses, Springer, 1989. pp. 535–541.
40.
Bjørn Clausen, T Lorentzen and T Leffers, Acta Materialia 1998, vol. 46, pp. 3087-3098.CrossRef
41.
L.N. Brewer, D.P. Field, and C.C. Merriman: in Electron Backscatter Diffraction in Materials Science, J.A. Schwartz, K. Mukul, A.L. Brent, and F.P. David, eds., Springer, Boston, 2009, pp. 251–62.
42.
M Kamaya, AJ Wilkinson and JM Titchmarsh, Nucl. Eng. Des. 2005, vol. 235, pp. 713-725.CrossRef
43.
AJ Wilkinson and DJ Dingley, Acta Metallurgica et Materialia 1991, vol. 39, pp. 3047-3055.CrossRef
44.
J. Jiang, T.B. Britton and A.J. Wilkinson, Acta Materialia 2013, vol. 61, pp. 5895-5904.CrossRef
45.
J. Jiang, TB Britton, AJ Wilkinson, Acta Materialia 2015, vol. 94, pp. 193-204.CrossRef
46.
J. Jiang, TB Britton, AJ Wilkinson, Int. J. Plast 2015, vol. 69, pp. 102-117.CrossRef
47.
R Dupke and W Reimers, Zeitschrift für Metallkunde 1995, vol. 86, pp. 665-670.
48.
U. Welzel, J. Ligot, P. Lamparter, A. C. Vermeulen and E. J. Mittemeijer, Journal of Applied Crystallography 2005, vol. 38, pp. 1-29.CrossRef
49.
D. Kohli, R. Rakesh, V. P. Sinha, G. J. Prasad and I. Samajdar, Journal of Nuclear Materials 2014, vol. 447, pp. 150-159.CrossRef
50.
J. Peng, V. Ji, W. Seiler, A. Tomescu, A. Levesque and A. Bouteville, Surface and Coatings Technology 2006, vol. 200, pp. 2738-2743.CrossRef
51.
GE Dieter, D. Bacon: Mechanical Metallurgy. McGraw-Hill, New York, 1986.
52.
SI Wright, MM Nowell, DP Field, Microscopy and Microanalysis 2011, vol. 17, pp. 316-329.CrossRef
53.
54.
DP Field, PB Trivedi, SI Wright and M Kumar, Ultramicroscopy 2005, vol. 103, pp. 33-39.CrossRef
55.
UF Kocks and H Mecking, Progress in Materials Science 2003, vol. 48, pp. 171-273.CrossRef
56.
SK Shekhawat, V Basavaraj, VD Hiwarkar, R Chakrabarty, J Nemade, PJ Guruprasad, KG Suresh, RD Doherty and I Samajdar, Metallurgical and Materials Transactions A 2014, vol. 45, pp. 3695-3698.CrossRef
57.
N Keskar, S Mukherjee, KV ManiKrishna, D Srivastava, GK Dey, P Pant, RD Doherty, I Samajdar, Acta Materialia, 2014, vol. 69, pp. 265-274.CrossRef
58.
ACE Reid, RC Lua, RE García, VR Coffman, SA Langer, Int. J. Mater. Product Technol 2009, vol. 35, pp. 361-373.CrossRef
59.
N Rajmohan, Y Hayakawa, JA Szpunar and JH Root, Acta Materialia 1997, vol. 45, pp. 2485-2494.CrossRef
60.
61.
62.
A. Albou, S Raveendra, P Karajagikar, I. Samajdar, C Maurice, JH Driver, Scripta Mater. 2010, vol. 62, pp. 469-472.CrossRef
63.
RD Doherty, DA Hughes, FJ Humphreys, JJ Jonas, DJ Jensen, ME Kassner, WE King, TR McNelley, HJ McQueen, AD Rollett, Materials Science and Engineering: A 1997, vol. 238, pp. 219-274.CrossRef
64.
65.
BJ Duggan, K Lücke, G Köhlhoff and CS Lee, Acta Metallurgica et Materialia 1993, vol. 41, pp. 1921-1927.CrossRef
66.
D Juul Jensen, Scripta Metallurgica et Materialia 1992, vol. 27, pp. 533-538.CrossRef
67.
AA Ridha and WB Hutchinson, Acta Metallurgica 1982, vol. 30, pp. 1929-1939.CrossRef
68.
69.
HE Vatne, R Shahani and E Nes, Acta Materialia 1996, vol. 44, pp. 4447-4462.CrossRef
70.
PJ Guruprasad and AA Benzerga, Journal of the Mechanics and Physics of Solids 2008, vol. 56, pp. 132-156.CrossRef
71.
MG Lee, H Lim, BL Adams, JP Hirth and RH Wagoner, International Journal of Plasticity 2010, vol. 26, pp. 925-938.CrossRef
72.
M Arul Kumar and Sivasambu Mahesh, International Journal of Plasticity 2012, vol. 36, pp. 15-33.CrossRef
73.
F Roters, D Raabe and G Gottstein, Computational Materials Science 1996, vol. 7, pp. 56-62.CrossRef
74.
PJ Guruprasad, WJ Carter and AA Benzerga, Acta Materialia 2008, vol. 56, pp. 5477-5491.CrossRef
75.
ZQ Wang and IJ Beyerlein, International Journal of Plasticity 2011, vol. 27, pp. 1471-1484.CrossRef
76.
Erik Van der Giessen and Alan Needleman, Modelling and Simulation in Materials Science and Engineering 1995, vol. 3, p. 689.CrossRef
77.
L.P. Kubin, G. Canova, M. Condat, B. Devincre, V. Pontikis, and Y. Bréchet: Solid State Phenomena (Trans Tech Publ, San Diego, 1992), pp 455-472.
78.
HM Zbib, M. Rhee, JP Hirth, International Journal of Mechanical Sciences 1998, vol. 40, pp. 113-127.CrossRef
79.
A. Arsenlis, W. Cai, M. Tang, M. Rhee, T. Oppelstrup, G. Hommes, TG Pierce, VV Bulatov, Model. Simul. Mater. Sci. Eng. 2007, vol. 15, p. 553.CrossRef
80.
AA Benzerga, Y Bréchet, A Needleman and E Van der Giessen, Modelling and Simulation in Materials Science and Engineering 2003, vol. 12, p. 159.CrossRef
81.
HHM Cleveringa, E Vander Giessen and A Needleman, Philosophical Magazine A 1999, vol. 79, pp. 893-920.CrossRef
82.
P. J. Guruprasad and A. A. Benzerga, Philosophical Magazine 2008, vol. 88, pp. 3585-3601.CrossRef
83.
I. Samajdar, RD Doherty, Scripta Metall. Mater. 1995, vol. 32, pp. 845-850.CrossRef
84.
BB He: Two-dimensional X-ray diffraction. (Wiley, New York, 2011).
Metadata
Title
Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy
Authors
Arijit Lodh
Tawqeer Nasir Tak
Aditya Prakash
P. J. Guruprasad
Christopher Hutchinson
Indradev Samajdar
Publication date
16-08-2017
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 11/2017
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-017-4280-x

Other articles of this Issue 11/2017

Metallurgical and Materials Transactions A 11/2017 Go to the issue

OriginalPaper

Influence of the Heterogeneous Nucleation Sites on the Kinetics of Intermetallic Phase Formation in Aged Duplex Stainless Steel

OriginalPaper

Effect of Temperature and Composition on NiAl Precipitation and Morphology in Fe-Ni-Al Alloys

OriginalPaper

Comprehensive Understanding of Ductility Loss Mechanisms in Various Steels with External and Internal Hydrogen

OriginalPaper

Effect of Boron on the Strength and Toughness of Direct-Quenched Low-Carbon Niobium Bearing Ultra-High-Strength Martensitic Steel

OriginalPaper

Effect of Precipitation During Quenching on the Prediction of the Mechanical Properties of Al-5 Pct Cu Alloy After T6 Treatment

Erratum

Erratum to: Influence of Laser Processing Parameters on Microstructure and Corrosion Kinetics of Laser-Treated ZE41 Magnesium Alloy

Premium Partners

    Image Credits