Top

Published in:

2019 | OriginalPaper | Chapter

Research of Lean Premixed Flame by Chemiluminescence Tomography

Authors : Vuk Adžić, Mustafa Makhzoum, Aleksandar Milivojević, Miroljub Adžić

Published in: Experimental and Numerical Investigations in Materials Science and Engineering

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

An experimental research of lean premixed flame in a swirl burner is performed using CH* chemiluminescence imaging. The images of flame are acquired and the flame structure is investigated. The position of flame front, represented by the area with highest rate of exothermic chemical reactions, is deduced from the acquired images. To identify the flame front using two dimensional images, a method of image tomography is applied. A tomography of the images is numerically performed using an in-house developed numerical Abel transform. It is found that flame tomography enables precise location of flame front in turbulent flows. The tomography research is compared and analyzed with the numerical results of the same burner.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Measurement of the Stress State in the Lower Link of the Three-Point Hitch Mechanism

next chapter freeCappuccino - An Open Source Software Library for Computational Continuum Mechanics

Gaydon, A., Wolfhard, H.: Flames, Their Structure, Radiation and Temperature. Chapman and Hall, London (1960)

Gupta, K., Lilley, G., Syred, N.: Swirling Flows. Abacus Press, London (1984)

Adzic, M., Fotev, V., Zivkovic, M., Milivojevic, A.: Effect of a microturbine combustor type on emissions at lean-premixed conditions. J. Propuls. Power (2010). https://doi.org/10.2514/1.47456CrossRef

Taamallah, S., Chakroun, N., Watanabe, H., Shanbhogue, S., Ghoniem, A.: On the characteristic flow and flame times for scaling oxy and air flame stabilization modes in premixed swirl combustion. Proc. Combust. Inst. 36(3), 3799–3807 (2016). https://doi.org/10.1016/j.proci.2016.07.022CrossRef

Carlsson, H., Nordström, E., Bohlin, A., Wu, Y., Zhou, B., Li, Z., Alden, M., Bengtsson, P.E., Bai, X.-S.: Numerical and experimental study of flame propagation and quenching of lean premixed turbulent low swirl flames at different Reynolds numbers. Combust. Flame 162, 2582–2591 (2015). http://lup.lub.lu.se/record/8080551CrossRef

Hardalupas, Y., Orain, M.: Local measurements of the time-dependent heat release rate and equivalence ratio using chemiluminescent emission from a flame. Combust. Flame 139(3), 188–207 (2004)CrossRef

Adzic, M., Fotev, V., Jovanović, S., Milivojević, A., Jovicic, V., Milekic, G., Bogner, M., Adzic, V.: The FP6-INCO-WBC Flexible Premixed Burners for Low Cost Domestic Heating Systems. FLEXHEAT, Supported by the EC (2004–2007)

Orain, M., Hardalupas, Y.: Effect of fuel type on equivalence ratio measurements using chemiluminescence in premixed flames. Comptes Rendus Mec. 338(5), 241–254 (2010)CrossRef

Guibert, T., et al.: Flame chemiluminescence from CO₂—and N₂-diluted laminar CH₄/air premixed flames. Combust. Flame 181, 110–122 (2017)CrossRef

10.

Adzic, V., Milivojevic, A., Adzic, M.: Flame diagnostics making use of visualization of CH group. In: Proceedings of IEEP 2017 Conference, Zlatibor, June 2017 (2017)

11.

Makhzoum, M., Adzic, M., Fotev, V., Milivojević, A., Adzic, V.: Numerical analysis of lean premixed combustor fueled by propane-hydrogen mixture. Thermal Sci. (2017). https://doi.org/10.2298/TSCI160717131MCrossRef

12.

Adzic, M., Carvalho, I., Heitor, M.: Visualisation of the disintegration of an annular liquid sheet in a coaxial airblast injector at low atomizing air velocities. Opt. Diagn. Eng. 5(1), 27–38 (2001)

13.

Adzic, M., Carvalho, I., Heitor, M.: Error analysis and calibration procedure when using an ICCD camera for the study of spray formation. J. Flow Vis. Image Process. 4, 149–162 (1997)CrossRef

14.

Adzic, M., Zivkovic, M., Fotev, V., Milivojevic, A., Adzic, V.: Influential parameters of nitrogen oxides emissions for microturbine swirl burner with pilot burner. Chem. Ind. 64(4), 357–363 (2010)CrossRef

Title: Research of Lean Premixed Flame by Chemiluminescence Tomography
Authors: Vuk Adžić
Mustafa Makhzoum
Aleksandar Milivojević
Miroljub Adžić
Publisher: Springer International Publishing
Book: Experimental and Numerical Investigations in Materials Science and Engineering
Print ISBN: 978-3-319-99619-6

Electronic ISBN: 978-3-319-99620-2

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-319-99620-2_10

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners