Skip to main content
Top
Published in:

11-04-2024 | Electric, Fuel Cell, and Hybrid Vehicle, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering, Vision and Sensors

Research on Energy Consumption Optimization Control Strategy of Electric Vehicle Electric Drive Oil/Water Cooling System

Authors: Xuanyao Wang, Youwang Feng

Published in: International Journal of Automotive Technology | Issue 3/2024

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The electric drive thermal management system of electric vehicles is an important part of electric vehicles. To improve the cooling effect of the electric drive system and reduce energy consumption, a cooling scheme combining the spray oil cooling of the motor end winding with the cooling water jacket of the motor shell and the water cooling in the motor shaft is proposed. Based on the electric drive cooling system framework of electric vehicles, a fuzzy logic control strategy is established. The flow rate and heat dissipation in the system are optimized by controlling the rotation speed of the oil/water cooling pump and the radiator fan, which further reduces the energy consumption of the system. In addition, through the co-simulation of AMESim and Simulink, under the same simulation time, the simulation comparison and analysis are carried out under SFTP-US06 and WLTC conditions, respectively. The power loss of fuzzy logic control is 9% and 28% lower than that of switching control, and 21% and 25% lower than that of PID control, respectively.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

ATZelectronics worldwide

ATZlectronics worldwide is up-to-speed on new trends and developments in automotive electronics on a scientific level with a high depth of information. 

Order your 30-days-trial for free and without any commitment.

Show more products
Literature
go back to reference Bahman, A. S., Ma, K., & Blaabjerg, F. (2018). A lumped thermal model including thermal coupling and thermal boundary conditions for high-power IGBT modules. Ieee T Power Electr, 33(3), 2518–2530.CrossRef Bahman, A. S., Ma, K., & Blaabjerg, F. (2018). A lumped thermal model including thermal coupling and thermal boundary conditions for high-power IGBT modules. Ieee T Power Electr, 33(3), 2518–2530.CrossRef
go back to reference Bjorn, A. (2013). Lumped parameter thermal modelling of electric machines. Chalmers University of Technology. Bjorn, A. (2013). Lumped parameter thermal modelling of electric machines. Chalmers University of Technology.
go back to reference Ding, S. Y., Jiang, X., Zhu, M., et al. (2020). Starting and steady temperature rise investigation for permanent magnet synchronous motor based on lumped-parameter thermal-network. Electric Machines and Control, 24(05), 143–150. Ding, S. Y., Jiang, X., Zhu, M., et al. (2020). Starting and steady temperature rise investigation for permanent magnet synchronous motor based on lumped-parameter thermal-network. Electric Machines and Control, 24(05), 143–150.
go back to reference Duan, J. C. (2021). Design and performance research on oil cooling system of new energy vehicle drive motor. South China University of Technology. Duan, J. C. (2021). Design and performance research on oil cooling system of new energy vehicle drive motor. South China University of Technology.
go back to reference Garud, K. S., Hwang, S. G., Han, J. W., & Lee, M. Y. (2022). Performance characteristics of the direct spray oil cooling system for a driving motor of an electric vehicle. International Journal of Heat and Mass Transfer, 196, 123228.CrossRef Garud, K. S., Hwang, S. G., Han, J. W., & Lee, M. Y. (2022). Performance characteristics of the direct spray oil cooling system for a driving motor of an electric vehicle. International Journal of Heat and Mass Transfer, 196, 123228.CrossRef
go back to reference Ghahfarokhi, P. S., Podgornovs, A., & Kallaste A, et al. (2021). Oil spray cooling with hairpin windings in high-performance electric vehicle motors. In: 2021 28th International Workshop on Electric Drives: Improving Reliability of Electric Drives (IWED). 2021, (pp. 1–5). https://doi.org/10.1109/iwed52055.2021.9376390. Ghahfarokhi, P. S., Podgornovs, A., & Kallaste A, et al. (2021). Oil spray cooling with hairpin windings in high-performance electric vehicle motors. In: 2021 28th International Workshop on Electric Drives: Improving Reliability of Electric Drives (IWED). 2021, (pp. 1–5). https://​doi.​org/​10.​1109/​iwed52055.​2021.​9376390.
go back to reference Ha, T., Han, N. G., Kim, M. S., et al. (2021). Experimental study on behavior of coolants, particularly the oil-cooling method, in electric vehicle motors using hairpin winding. Energies, 14, 4. Ha, T., Han, N. G., Kim, M. S., et al. (2021). Experimental study on behavior of coolants, particularly the oil-cooling method, in electric vehicle motors using hairpin winding. Energies, 14, 4.
go back to reference Han, F., Guo, H., & Ding, X. F. (2021). Design and optimization of a liquid cooled heat sink for a motor inverter in electric vehicles. Applied Energy, 291, 116819.CrossRef Han, F., Guo, H., & Ding, X. F. (2021). Design and optimization of a liquid cooled heat sink for a motor inverter in electric vehicles. Applied Energy, 291, 116819.CrossRef
go back to reference Hou, G. L. (2022). Analysis on temperature field and thermal management system of electric vehicle driving motor. Jilin University. Hou, G. L. (2022). Analysis on temperature field and thermal management system of electric vehicle driving motor. Jilin University.
go back to reference Huang, H. (2005). Research and optimization design of engine cooling system. Shandong University. Huang, H. (2005). Research and optimization design of engine cooling system. Shandong University.
go back to reference Huang, J. K., Naini, S. S., Miller, R., Rizzo, D., Sebeck, K., Shurin, S., & Wagner, J. (2019). A hybrid electric vehicle motor cooling system-design, model, and control. IEEE Transactions on Vehicular Technology, 68(5), 4467–4478.CrossRef Huang, J. K., Naini, S. S., Miller, R., Rizzo, D., Sebeck, K., Shurin, S., & Wagner, J. (2019). A hybrid electric vehicle motor cooling system-design, model, and control. IEEE Transactions on Vehicular Technology, 68(5), 4467–4478.CrossRef
go back to reference Jing, L., Du, M. X., Wei, K. X., & Hurley, W. G. (2020). An improved behavior model for IGBT modules driven by datasheet and measurement. Ieee T Electron Dev, 67(1), 230–236.CrossRef Jing, L., Du, M. X., Wei, K. X., & Hurley, W. G. (2020). An improved behavior model for IGBT modules driven by datasheet and measurement. Ieee T Electron Dev, 67(1), 230–236.CrossRef
go back to reference Kačenka, A., Pop, A. C., Vintiloiu, I., & Fodorean, D. (2019). Lumped parameter thermal modeling of permanent magnet synchronous motor. In: 2019 Electric Vehicles International Conference (EV), pp. 1–6. Kačenka, A., Pop, A. C., Vintiloiu, I., & Fodorean, D. (2019). Lumped parameter thermal modeling of permanent magnet synchronous motor. In: 2019 Electric Vehicles International Conference (EV), pp. 1–6.
go back to reference Kral, C., Haumer, A., & Lee, S. B. (2014). A practical thermal model for the estimation of permanent magnet and stator winding temperatures. IEEE Transactions on Power Electronics, 29(1), 455–464.CrossRef Kral, C., Haumer, A., & Lee, S. B. (2014). A practical thermal model for the estimation of permanent magnet and stator winding temperatures. IEEE Transactions on Power Electronics, 29(1), 455–464.CrossRef
go back to reference Lai, C. G., Lyu, B., Chen, Y., et al. (2018). Thermal Simulation and Analysis of a Water-Cooled Motor Controller Based on Star-ccm+. Journal of Chongqing University of Technology (natural Science), 8, 8–13. Lai, C. G., Lyu, B., Chen, Y., et al. (2018). Thermal Simulation and Analysis of a Water-Cooled Motor Controller Based on Star-ccm+. Journal of Chongqing University of Technology (natural Science), 8, 8–13.
go back to reference Li, C. G., Yang, J. X., Zhao, Y. F., et al. (2022). Research on cooling channel of high power density motor. Machinery Design & Manufacture, 129, 133–138. Li, C. G., Yang, J. X., Zhao, Y. F., et al. (2022). Research on cooling channel of high power density motor. Machinery Design & Manufacture, 129, 133–138.
go back to reference Li, D. J. (2021). Study on electric drive thermal management system and waste recovery system of EVs. Chongqing University. Li, D. J. (2021). Study on electric drive thermal management system and waste recovery system of EVs. Chongqing University.
go back to reference Li, D. J., Zhang, C., Fan, R., et al. (2021). An innovative thermal management method for cooling loop of electric driving system for durable and high efficiency electric vehicle. Applied Thermal Engineering, 195, 117176.CrossRef Li, D. J., Zhang, C., Fan, R., et al. (2021). An innovative thermal management method for cooling loop of electric driving system for durable and high efficiency electric vehicle. Applied Thermal Engineering, 195, 117176.CrossRef
go back to reference Li, H. Q. (2016). Study on water cooled heat dissipation characteristics of motor controller of pure electric vehicle. Hefei University of Technology. Li, H. Q. (2016). Study on water cooled heat dissipation characteristics of motor controller of pure electric vehicle. Hefei University of Technology.
go back to reference Liang, P. X., Pei, Y. L., Chai, F., & Cheng, S. K. (2016). Equivalent stator slot model of temperature field for high torque-density permanent magnet synchronous in-wheel motors accounting for winding type. COMPEL, 35(2), 713–727.CrossRef Liang, P. X., Pei, Y. L., Chai, F., & Cheng, S. K. (2016). Equivalent stator slot model of temperature field for high torque-density permanent magnet synchronous in-wheel motors accounting for winding type. COMPEL, 35(2), 713–727.CrossRef
go back to reference Liu, Bo. (2022). Electromagnetic and thermal performance analysis of hairpin winding PMSM for EV. Beijing Jiaotong University. Liu, Bo. (2022). Electromagnetic and thermal performance analysis of hairpin winding PMSM for EV. Beijing Jiaotong University.
go back to reference LMS Imagine. (2021). Lab AMESim User’s guide. LMS Imagine. (2021). Lab AMESim User’s guide.
go back to reference Lu, L. (2018). Simulation of global temperature field for pure electric vehicle motor inverter and calculation of IGBT junction temperature. Hefei University of Technology. Lu, L. (2018). Simulation of global temperature field for pure electric vehicle motor inverter and calculation of IGBT junction temperature. Hefei University of Technology.
go back to reference Ma, M. Y., Guo, W. S., Yan, X. S., et al. (2020). compact thermal network model for thermal analysis of power modules in electric vehicle. Proceedings of the CSEE, 40(18), 5796–5805. Ma, M. Y., Guo, W. S., Yan, X. S., et al. (2020). compact thermal network model for thermal analysis of power modules in electric vehicle. Proceedings of the CSEE, 40(18), 5796–5805.
go back to reference Mazaheri, N., & Mwesigye, A. (2023). Application of novel double-layer micro-jet heat sinks for energy-efficient thermal management of motor inverters in electric vehicles. Applied Thermal Engineering, 231, 120836.CrossRef Mazaheri, N., & Mwesigye, A. (2023). Application of novel double-layer micro-jet heat sinks for energy-efficient thermal management of motor inverters in electric vehicles. Applied Thermal Engineering, 231, 120836.CrossRef
go back to reference Park, M. H., & Kim, S. C. (2023). Development and validation of lumped parameter thermal network model on rotational oil spray cooled motor for electric vehicles. Applied Thermal Engineering, 225, 120176.CrossRef Park, M. H., & Kim, S. C. (2023). Development and validation of lumped parameter thermal network model on rotational oil spray cooled motor for electric vehicles. Applied Thermal Engineering, 225, 120176.CrossRef
go back to reference Shen, J., Chen, X. J., & Cui, Z. X. (2021). Design and optimization of internal water cooling system of permanent magnet synchronous motor based on CFD. Chinese Journal of Applied Mechanics, 38(02), 630–637. Shen, J., Chen, X. J., & Cui, Z. X. (2021). Design and optimization of internal water cooling system of permanent magnet synchronous motor based on CFD. Chinese Journal of Applied Mechanics, 38(02), 630–637.
go back to reference Song, Z. X., Huang, R. D., Wang, W. S., Liu, S. Y., & Liu, C. H. (2022). An improved dual iterative transient thermal network model for PMSM with natural air cooling. IEEE Transactions on Energy Conversion, 37(4), 2588–2600.CrossRef Song, Z. X., Huang, R. D., Wang, W. S., Liu, S. Y., & Liu, C. H. (2022). An improved dual iterative transient thermal network model for PMSM with natural air cooling. IEEE Transactions on Energy Conversion, 37(4), 2588–2600.CrossRef
go back to reference Tikadar, A., Johnston, D., Kumar, N., Joshi, Y., & Kumar, S. (2021). Comparison of electro-thermal performance of advanced cooling techniques for electric vehicle motors. Applied Thermal Engineering, 183, 116182.CrossRef Tikadar, A., Johnston, D., Kumar, N., Joshi, Y., & Kumar, S. (2021). Comparison of electro-thermal performance of advanced cooling techniques for electric vehicle motors. Applied Thermal Engineering, 183, 116182.CrossRef
go back to reference Tovar-Barranco, A., Lopez-De-Heredia, A., Villar, I., & Briz, F. (2021). Modeling of end-space convection heat-transfer for internal and external rotor PMSMs with fractional-slot concentrated windings. IEEE Transactions on Industrial Electronics, 68(3), 1928–1937.CrossRef Tovar-Barranco, A., Lopez-De-Heredia, A., Villar, I., & Briz, F. (2021). Modeling of end-space convection heat-transfer for internal and external rotor PMSMs with fractional-slot concentrated windings. IEEE Transactions on Industrial Electronics, 68(3), 1928–1937.CrossRef
go back to reference Wahl, A., Wellmann, C., Krautwig, B., Manns, P., Chen, B., Schernus, C., & Andert, J. (2022). Efficiency increase through model predictive thermal control of electric vehicle powertrains. Energies, 15, 4.CrossRef Wahl, A., Wellmann, C., Krautwig, B., Manns, P., Chen, B., Schernus, C., & Andert, J. (2022). Efficiency increase through model predictive thermal control of electric vehicle powertrains. Energies, 15, 4.CrossRef
go back to reference Wahl, A., Wellmann, C., Monissen, C., & Andert, J. (2023). Active temperature control of electric drivetrains for efficiency increase. Applied Energy, 338, 120887.CrossRef Wahl, A., Wellmann, C., Monissen, C., & Andert, J. (2023). Active temperature control of electric drivetrains for efficiency increase. Applied Energy, 338, 120887.CrossRef
go back to reference Wang, Q., Liang, D., & Wang, J. (2015). Electric vehicle self-adaptive energy-saving cooling system design based on fuzzy control methods of fan and pump electromotors. In: 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp. 1–4. Wang, Q., Liang, D., & Wang, J. (2015). Electric vehicle self-adaptive energy-saving cooling system design based on fuzzy control methods of fan and pump electromotors. In: 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp. 1–4.
go back to reference Wang, X. H., Li, B., Huang, K., et al. (2022). Experimental investigation on end winding thermal management with oil spray in electric vehicle. Case Studies in Thermal Engineering, 35, 102082.CrossRef Wang, X. H., Li, B., Huang, K., et al. (2022). Experimental investigation on end winding thermal management with oil spray in electric vehicle. Case Studies in Thermal Engineering, 35, 102082.CrossRef
go back to reference Wu, S. N., Hao, D. Q., & Tong, W. M. (2022). Thermal calculation of high speed permanent magnet synchronous motor based on equivalent thermal network and CFD method. Electric Machines and Control, 26(07), 29–36. Wu, S. N., Hao, D. Q., & Tong, W. M. (2022). Thermal calculation of high speed permanent magnet synchronous motor based on equivalent thermal network and CFD method. Electric Machines and Control, 26(07), 29–36.
go back to reference Xu, J., Sun, Y. M., Li, G. Y., et al. (2018). Optimal temperature control strategy for electric transport vehicle drive motor cooling system. Journal of South China University of Technology (natural Science Edition), 46(12), 51–57. Xu, J., Sun, Y. M., Li, G. Y., et al. (2018). Optimal temperature control strategy for electric transport vehicle drive motor cooling system. Journal of South China University of Technology (natural Science Edition), 46(12), 51–57.
go back to reference Yang, F., Liu, C., & Shen, J. (2022). Immersion oil cooling method of discrete SiC power device in electric vehicle. IEEE Energy Conversion Congress and Exposition (ECCE), 2022, 1–5. Yang, F., Liu, C., & Shen, J. (2022). Immersion oil cooling method of discrete SiC power device in electric vehicle. IEEE Energy Conversion Congress and Exposition (ECCE), 2022, 1–5.
go back to reference Yang, X. M. (2013). Design and optimization of the heat sink for motor controller. Harbin University of Science and Technology. Yang, X. M. (2013). Design and optimization of the heat sink for motor controller. Harbin University of Science and Technology.
Metadata
Title
Research on Energy Consumption Optimization Control Strategy of Electric Vehicle Electric Drive Oil/Water Cooling System
Authors
Xuanyao Wang
Youwang Feng
Publication date
11-04-2024
Publisher
The Korean Society of Automotive Engineers
Published in
International Journal of Automotive Technology / Issue 3/2024
Print ISSN: 1229-9138
Electronic ISSN: 1976-3832
DOI
https://doi.org/10.1007/s12239-024-00047-1

Other articles of this Issue 3/2024

Study on Modeling and Control for a Novel Active Suspension

  • Vehicle Dynamics and Control, Other Fields of Automotive Engineering

Development of an Algorithm for Predicting the Heat Resistance Temperature of Automotive Lamps

  • Electric, Fuel Cell, and Hybrid Vehicle, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering, Vision and Sensors

Enhancing Train Coupling Simulation by Incorporating Speed-Dependent Energy Absorber Characteristics Through a Deep Neural Network

  • Body and Safety, Chassis, Human Factors and Ergonomics, Materials and Recycling, Noise, Vibration and Harshness, Transmission and Driveline, Vehicle Dynamics and Control