Top

The International Journal of Advanced Manufacturing Technology

Published in:

03-07-2019 | ORIGINAL ARTICLE

Research on surface modification of anodized aluminum alloy using piezoelectric machine hammer peening

Authors: X. H. Lin, H. B. Huang, C. S. Zhou, J. C. Liu, M Saleh, Z. Z. Wang

Published in: The International Journal of Advanced Manufacturing Technology | Issue 1-4/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Piezoelectric machine hammer peening (PEMHP) is a mechanical surface treatment method that hammers the workpiece surface by an oscillatory spherical tungsten carbide tool. The experiments have been conducted to investigate the surface modification of 6016 anodized aluminum alloy using PEMHP, including surface roughness, surface topography, and hardness. The experimental and simulation results indicated that PEMHP has better surface smoothing effect than milling and improves the surface integrity. The hardness of anodized aluminum alloy increases about 14–33% with different peening parameters. The influences of peening parameters on surface roughness, surface topography, and hardness are discussed. It is found out that peening parameters have strongly influenced surface integrity, especially line pitch. Therefore, PEMHP can be a subsequent machine process for aluminum alloy after anodic oxidation to improve surface integrity and hardness further.

previous article Aerostatic moving stage positioning compensation using a numerical algorithm combined with an image acquisition method

next article Effect of the interaction between depth of cut and height-to-width ratio of a workpiece on vibration amplitude during face milling of C45 steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Walker DD, Beaucamp AT, Freeman RR (2004) Recent development of precessions polishing for large components and free-form surfaces. Proc SPIE 5523:281–289CrossRef

Pan R, Zhang Y, Ding J, Wang Z, Guo Y (2015) Research on optimization of conformal polishing using continuous precession. Int J Adv Manuf Technol 78(1–4):63–71CrossRef

Benedetti M, Fontanari V, Bandini M, Savio E (2015) High- and very high-cycle plain fatigue resistance of shot peened high-strength aluminum alloys: the role of surface morphology. Int J Fatigue 70(61):451–462CrossRef

Wied J (2006) Machine polishing of metal forming dies. Master’s thesis, Royal Institute of Technology Stockholm

Wied J, Scheil J, Klamser M, Berger C (2011) Impact experiments and finite element simulation of surface roughness reduction by machine hammer peening. Mat wiss u Werkstofftech 42(9):827–832CrossRef

Berglund J, Liljengren M, Rosen BG (2011) On finishing of pressing die surface using machine hammer peening. Int J Adv Manuf Technol 52(1–4):115–121CrossRef

Bleicher F, Lechner C, Habersohn C, Kozeschnik E, Adjassoho B, Kaminski H (2012) Mechanism of surface modification using machine hammer peening technology. CIRP Annals-Manufacturing technology 61(1):375–378CrossRef

Bleicher F, Lechner C, Habersohn C, Obermair M, Heindl F, Ripoll M (2013) Improving the tribological characteristics of tool and mould surfaces by machine hammer peening. CIRP Ann Manuf Technol 62(1):239–242CrossRef

Lechner C, Bleicher F, Habersohn C, Bauer C, Goessinger S (2012) The use of machine hammer peening technology for smoothening and structuring of surfaces. Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium 23(1):331–337

10.

Krall S, Christoph L, Michael N, Friedrich B (2015) Robot based machine hammer peening using an electromagnetic driven hammering device. 26^th DAAAM International Symposium on Intelligent Manufacturing and Automation

11.

Chen T, John H, Xu J, Lu Q, Hawk J, Liu X (2013) Influence of surface modifications on pitting corrosion behavior of nickel-base alloy 718. Part 1: effect of machine hammer peening. Corros Sci 77(1):230–245CrossRef

12.

Trauth D, Feuerhack A, Mattfeld P, Klocke F (2015) Analysis of the velocity distribution of an elliptic surface structure manufactured by machine hammer peening. Tribol Lett 60(1):1–13CrossRef

13.

Trauth D, Klocke F, Terhorst M, Mattfeld P (2015) Physicochemical analysis of machine hammer peened surface structures for deep drawing: determination of the work of adhesion and spreading pressure of lubrication to surface structure. J Tribol 137(2):022301 1–022301 7CrossRef

14.

Trauth D, Klocke F, Terhorst M, Mattfeld P (2016) Computational fluid dynamics analysis of a machine hammer peened surface structure for lubricated sliding contacts. J Tribol 138(2):021704 1–021704 02170410

15.

Hacini L, Van N, Bocher P (2009) Evaluation of residual stresses induced by robotized hammer peening by the contour method. Exp Mech 49(6):775–783CrossRef

16.

Lefebvre F, Peyrac C, Elbel G, Gomez C, Verdu C, Buffiere J (2015) Understanding of fatigue strength improvement of steel structures by hammer peening treatment. Procedia Eng 133:454–464CrossRef

17.

Ye Y, Wang H, Tang G, Song G (2018) Effect of electropulsing-assisted ultrasonic nanocrystalline surface modification on the surface mechanical properties and microstructure of Ti-6Al-4V alloy. J Mater Eng Perform 27(5):2394–2403CrossRef

18.

Zhu K, Jiang C, Li Z, Du L, Zhao Y, Chai Z, Wang L, Chen M (2016) Residual stress and microstructure of the CNT/6061 composite after shot peening. Mater Des 107:333–340CrossRef

Title: Research on surface modification of anodized aluminum alloy using piezoelectric machine hammer peening
Authors: X. H. Lin
H. B. Huang
C. S. Zhou
J. C. Liu
M Saleh
Z. Z. Wang
Publication date: 03-07-2019
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 1-4/2019
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04016-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-4/2019

A novel integrated process–machine approach for designing customized milling machines

Advanced rheological and mechanical properties of three-phase polymer nanocomposites through strong interfacial interaction of graphene and titania

A novel and smart interactive feature recognition system for rotational parts using a STEP file

Structural failure during extrusion-based 3D printing processes

A cost-effective method for rapid manufacturing polymer rapid tools used for liquid silicone rubber injection molding

On the performance of VSI Shewhart control chart for monitoring the coefficient of variation in the presence of measurement errors

Premium Partners