Issue 1/2022
Content (27 Articles)
Predicting the Uniaxial Compressive Strength of a Limestone Exposed to High Temperatures by Point Load and Leeb Rebound Hardness Testing
María Elvira Garrido, Ferry B. Petnga, Víctor Martínez-Ibáñez, José B. Serón, Carlos Hidalgo-Signes, Roberto Tomás
Effect of Confining Pressure on the Damage Evolution and Failure Behaviors of Intact Sandstone Samples During Cyclic Disturbance
Xu Chen, Minggao Tang, Chun’an Tang
Effect of Acid–Rock Reaction on the Microstructure and Mechanical Property of Tight Limestone
Jie Lai, Jianchun Guo, Yingxian Ma, Hangyu Zhou, Shibin Wang, Yuxuan Liu
Laboratory Evaluation of the Thermal Breakout Method for Maximum Horizontal Stress Measurement
Maciej Trzeciak, Hiroki Sone, Samuel Voegeli, Charlotte E. Bate, Herbert Wang
Effect of Temperature on Macroscopic and Microscopic Properties of Sandstone From Qidong Coal Mine
Long-Chuan Deng, Xiao-Zhao Li, Ying-Chao Wang, Yun Wu, Zhen Huang, Chun-lu Jiang
Influence of Temperature and Crystal Orientation on Compressive Strength of Rock Salt Using a Newly Developed High-Pressure Thermal Cell
Amirsalar Moslehy, Khalid A. Alshibli, Timothy J. Truster
Fractures and Acoustic Emission Features of Non-persistent Jointed Rocks Subjected to Freeze–Thaw-Compression Load: Experimental Insights
Chen Qiao, Zhengyang Song, Yu Wang, Dwayne Tannant, Changhong Li
Estimation of Unconfined Compressive Strength (UCS) of Carbonate Rocks by Index Mechanical Tests and Specimen Size Properties: Central Alborz Zone of Iran
Erfan Sadeghi, Mohammad Reza Nikudel, Mashallah Khamehchiyan, Amir Kavussi
Digital Evaluation of Micro-Pore Water Effects on Mechanical and Damage Characteristics of Sandstone Subjected to Uniaxial, Cyclic Loading–Unloading Compression by 3D Reconstruction Technique
Xiao-Ping Zhou, Da-Chao Jiang, Zhi Zhao
Microscopic Modeling of Frictional Response of Smooth Joint Under Normal Cyclic Loading
Qingsheng Bai, Heinz Konietzky, Wengang Dang
Study on a Damage Model and Uniaxial Compression Simulation Method of Frozen–Thawed Rock
Qiang Feng, Jichao Jin, Shuang Zhang, Weiwei Liu, Xuxu Yang, Weiteng Li
Theoretical and Experimental Study on Single Spherical Button Penetration into Granite Rock Under Dynamic Impact Loading
Yanliang Li, Jianming Peng, Jiming Li, Dong Ge
Development of Reduced Order Hydro-mechanical Models of Fractured Media
Anil Kumar, Roger Hu, Stuart D. C. Walsh
Experimental Study on the Performance of Different Meshes Under Quasi-Static Loading
Hongpu Kang, Guiyang Yuan, Fuqiang Gao, Jinfu Lou
Combining Statistical Design with Deterministic Modelling to Assess the Effect of Site-Specific Factors on the Extent of Landslides
Vincent Lemiale, Carolyn Huston, Stuart Mead, David L. J. Alexander, Paul W. Cleary, Deepak Adhikary, Gary W. Delaney
Three-Dimensional Discontinuous Deformation Analysis of Failure Mechanisms and Movement Characteristics of Slope Rockfalls
Ke Ma, Guoyang Liu
Zonal Disintegration Characteristics of Roadway Roof Under Strong Mining Conditions and Mechanism of Thick Anchored and Trans-boundary Supporting
Yuxin Yuan, Changliang Han, Nong Zhang, Xiaowei Feng, Peng Wang, Kai Song, Min Wei
An Investigation on the Bursting Liability of Oxidized Coal and the Coupling Mechanism of Rock Burst and Spontaneous Combustion
Rongkun Pan, Zhihui Ma, Minggao Yu, Chengdong Su, Jiangkun Chao
Microseismicity Characteristics Before and After a Rockburst and Mechanisms of Intermittent Rockbursts in a Water Diversion Tunnel
Yucheng Wang, Chun’an Tang, Liexian Tang, Shichao Zhang, Limin Li, Yubo Li, Wenshuo Duan
Creep and Control of the Deep Soft Rock Roadway (DSRR): Insights from Laboratory Testing and Practice in Pingdingshan Mining Area
Chen Xuyang, Wang Xufeng, Zhang Dongsheng, Qin Dongdong, Wang Ya, Wang Jiyao, Chang Zechao
Prediction of Longwall Progressive Subsidence Basin Using the Gompertz Time Function
Jian Wang, Keming Yang, Xiangping Wei, Xiaoyu Shi, Shuyi Yao
An Innovative Scheme to Make an Initial Guess for Iterative Optimization Methods to Calibrate Material Parameters of Strain-Hardening Elastoplastic Models
Manouchehr Sanei, Philippe R. B. Devloo, Tiago L. D. Forti, Omar Durán, Erick S. R. Santos
Simulation of Rock-Breaking Process by Drilling Machine and Dynamic Classification of Surrounding Rocks
Fei Tan, Minglong You, Changqun Zuo, Yu-Yong Jiao, Hunan Tian
Forty-Year Review of the Hoek–Brown Failure Criterion for Jointed Rock Masses
Hossein Rafiei Renani, Ming Cai
Discussion on “Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of Rock Fabric” of Schuster, V., Rybacki, E., Bonnelye, A., Herrmann, J., Schleicher, A.M., Dresen, G.
Eleonora Crisci, Alessio Ferrari, Lyesse Laloui
Authors’ Reply to the Discussion by Crisci et al. (2021) on “Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions Mechanical Properties and the Influence of Rock Fabric”
Valerian Schuster, Erik Rybacki, Audrey Bonnelye, Georg Dresen
Prediction of Particle Size Distribution Curves of Dump Materials Using Convolutional Neural Networks
Shubham Shrivastava, Debasis Deb, Sudipta Bhattacharjee