Top

Rock Mechanics and Rock Engineering

Published in:

07-03-2015 | Technical Note

Sandstone Turning by Abrasive Waterjet

Authors: Petr Hlaváček, Ján Cárach, Sergej Hloch, Karol Vasilko, Dagmar Klichová, Jiří Klich, Dominika Lehocká

Published in: Rock Mechanics and Rock Engineering | Issue 6/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Excerpt

The machining of materials with specific mechanical properties causes problems in terms of the required quality, economic efficiency, and overall effectiveness of the process. A number of works have been published which indicate that the subjects of interest are still important (Królczyk et al. 2013). The machining of the aforementioned materials based on conventional methods does not always meet the requirements of eco-friendly technology nor the efficiency potential of the technological device and tool (Vasilko and Strojný 1967; Królczyk et al. 2014). …

previous article Back Analysis of Grout Treatment at Sumbar Dam Using the Joint Hydraulic Factor

next article Editorial to Special Issue: Including Selected Papers from the 48th US Rock Mechanics/Geomechanics Symposium on "Rock Mechanics Across Length and Time Scales" held at the University of Minnesota, Minneapolis, June 1–4, 2014

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Agus M, Bortolussi A, Ciccu R, Kim WM, Manca PP (1993) The influence of rock properties on waterjet performance. In: Proceedings of the 7th American water jet conference, Seattle, WA, August 1993, pp 427–442

Ansari AI, Hashish M, Ohadi MM (1992) Flow visualization study of the macromechanics of abrasive-waterjet turning. Exp Mech 32:358–364. doi:10.1007/BF02325589 CrossRef

Axinte AD, Stepanian JP, Kong MC, McGourlay J (2009) Abrasive waterjet turning—an efficient method to profile and dress grinding wheels. Int J Mach Tools Manuf 49:351–356. doi:10.1016/j.ijmachtools.2008.11.006 CrossRef

Aydin G, Karakut I, Aydiner K (2013) Prediction of the cut depth of granitic rocks machined by abrasive waterjet (AWJ). Rock Mech Rock Eng 46:1223–1235. doi:10.1007/s00603-012-0307-1 CrossRef

Ciccu R, Grosso B (2014) Improvement of disc cutter performance by water jet assistance. Rock Mech Rock Eng 47:733–744. doi:10.1007/s00603-013-0433-4 CrossRef

Hashish M (1987) Turning with abrasive-waterjets—a first investigation. J Eng Ind 109:281–296CrossRef

Henning A (1999) Modeling of turning operation for abrasive waterjet. In: Hashish M (ed) Proceedings of the 10th American waterjet conference, Houston, TX, 14–17 August 1999. WJTA, St. Louis, MO

Hlaváč LM, Palička P (2006) Testing of parameters for turning by abrasive water jets. In: Proceedings of the 18th international conference on water jetting, Gdansk, Poland, September 2006. BHR Group, pp 123–128

Królczyk G, Gajek M, Legutko S (2013) Effect of the cutting parameters impact on tool life in duplex stainless steel turning process. Tehnički Vjesnik 20:587–592

Królczyk G, Nieslony P, Legutko S (2014) Microhardness and surface integrity in turning process of duplex stainless steel (DSS) for different cutting conditions. J Mater Eng Perform 23:859–866. doi:10.1007/s11665-013-0832-4 CrossRef

Liu D, Huang C, Wang J, Zhu H, Yao P, Liu Z (2014) Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design. Ceram Int 40:7899–7908CrossRef

Sharma V, Chattopadhyaya S, Hloch S (2011) Multi response optimization of process parameters based on Taguchi—Fuzzy model for coal cutting by water jet technology. Int J Adv Manuf Technol 56:1019–1025. doi:10.1007/s00170-011-3258-x CrossRef

Sitek L (2009) Turning by high-speed abrasive water jet—our experiences (in Czech). In: Proceedings of the international conference Vodní paprsek/Water Jet 2009, pp 160–169

Sitek L, Foldyna J, Souček K (2005) Shaping of rock specimens for testing of uniaxial tensile strength by high speed abrasive water jet: First experience. In: Konečný P (ed) Eurock 2005—impact of human activity on the geological environment. A.A. Balkema Publishers, Taylor & Francis Group, London, pp 545–549

Sitek L, Foldyna J, Martinec P, Scucka J, Bodnarova L, Hela R (2011) Use of pulsating water jet technology for removal of concrete in repair of concrete structures. Baltic J Road Bridge Eng 6:235–242CrossRef

Summers DA (1972) Water jet cutting related to jet and rock properties. In: Proceedings of the 14th symposium on rock mechanics, University Park, PA, pp 569–588

Summers DA (1992) Hydraulic mining: jet-assisted cutting. In: Hartman HL (ed) SME mining engineering handbook, 2nd edn. Society for Mining, Metallurgy, and Exploration Inc., Littleton, CO, pp 1918–1929

Teale R (1965) The concept of specific energy in rock drilling. Int J Rock Mech Min Sci Geomech Abstr 2(1):57–73. doi:10.1016/0148-9062(65)90022-7 CrossRef

Vasilko K, Strojný M (1967) Progressive methods of turning. Bratislava, p 202

Zhong ZW, Han ZZ (2002) Turning of glass with abrasive waterjet. Mater Manuf Process 17:339–349. doi:10.1081/AMP-120005380 CrossRef

Title: Sandstone Turning by Abrasive Waterjet
Authors: Petr Hlaváček
Ján Cárach
Sergej Hloch
Karol Vasilko
Dagmar Klichová
Jiří Klich
Dominika Lehocká
Publication date: 07-03-2015
Publisher: Springer Vienna
Published in: Rock Mechanics and Rock Engineering / Issue 6/2015
Print ISSN: 0723-2632
Electronic ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-015-0719-9

Springer Professional

Excerpt

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2015

Experimental Investigation on the Influence of High Pressure and High Temperature on the Mechanical Properties of Deep Reservoir Rocks

Cyclic Loading Effects on the Creep and Dilation of Salt Rock

Stress-Induced Fracturing of Reservoir Rocks: Acoustic Monitoring and μCT Image Analysis

Determination of Longwall Mining-Induced Stress Using the Strain Energy Method

Back Analysis of Grout Treatment at Sumbar Dam Using the Joint Hydraulic Factor

Experimental Study on Wave Propagation Across a Rock Joint with Rough Surface