Issue 1/2009
Content (50 Articles)
One-step synthesis route of the aligned and non-aligned single crystalline α-Si3N4 nanowires
Mashkoor Ahmad, Jiong Zhao, Fan Zhang, CaoFeng Pan, Jing Zhu
Deep levels, transport and THz emission properties of SiGe/Si quantum-well structures
I. V. Antonova, M. S. Kagan, E. P. Neustroev, S. A. Smagulova
Inducing effect of Pb(Zr0.4Ti0.6)O3 thin film derived by different processes in BiFeO3/Pb(Zr0.4Ti0.6)O3 multilayer capacitor at room temperature
Dan Xie, YongYuan Zang, YaFeng Luo, TianLing Ren, LiTian Liu, ZhiMin Dang
Energy spectrum of an electron confined in the hexagon-shaped quantum well
Yu. V. Vorobiev, V. R. Vieira, P. P. Horley, P. N. Gorley, J. González-Hernández
Effect of Cu seed on the synthesis and characterization of FeCo alloy nano-particles by using polyol method
Uk Rae Cho, Young Min Lee, Shalendra Kumar, Chan Gyu Lee, Bon Heun Koo
Comparison of short period InAs/GaSb superlattices on GaSb and GaAs substrates
Jie Guo, HuiJuan Chen, WeiGuo Sun, RuiTing Hao, YingQiang Xu, ZhiChuan Niu
Effects of Ti, Al and Hf on niobium silcides formation in the Nb-Si in situ composites
ShiYu Qu, YaFang Han, YongWang Kang
Improvement of warm formability of Al-Mg sheet alloys containing coarse second-phase particles
HanLiang Zhu, Arne K. Dahle, Amit K. Ghosh
An electrochemical and microstructural characterization of steel-mortar admixed with corrosion inhibitors
XianMing Shi, ZhengXian Yang, Tuan Anh Nguyen, ZhiYong Suo, Recep Avci, ShiZhe Song
Effect of one-step aging on microstructure and properties of a novel Al-Zn-Mg-Cu-Zr alloy
XiWu Li, BaiQing Xiong, YongAn Zhang, Cheng Hua, Feng Wang, BaoHong Zhu, HongWei Liu
The Young’s moduli prediction of random distributed short-fiber-reinforced polypropylene foams using finite element method
Bo Wang, RongXiu Wang, Yong Wu
A combinatorial approach of developing alloy thin films using co-sputtering technique for displays
Jaydeep Sarkar, Tien-Heng Huang, Lih-Ping Wang, Peter H. McDonald, Chi-Fung Lo, Paul S. Gilman
Optimization of the process for preparing Al-doped ZnO thin films by sol-gel method
JianLin Chen, Ding Chen, ZhenHua Chen
Highly efficient stacked organic light-emitting devices employing a novel intermediate layer
LianBin Niu, YunXia Guan, Yue Ren, ChunYang Kong, Yan Ma, YiPing Liang
Investigations of ZnO thin films deposited by a reactive pulsed laser ablation
J. B. Cui, Y. C. Soo, H. Kandel, M. A. Thomas, T. P. Chen, C. P. Daghlian
Switchable hydrophobic-hydrophilic layer obtained onto porous alumina by plasma-enhanced fluorination
A. Tressaud, C. Labrugère, E. Durand, C. Brigouleix, H. Andriessen
Novel wide band gap alloyed semiconductors, x(LiGaO2)1/2-(1−x)ZnO, and fabrication of their thin films
T. Omata, K. Tanaka, A. Tazuke, K. Nose, S. Otsuka-Yao-Matsuo
Dielectric tunable properties of BaTi4O9-doped Ba0.6Sr0.4TiO3 microwave composite ceramics
JingJi Zhang, JiWei Zhai, HaiTao Jiang, Xi Yao
Ferroelectric relaxor as a critical state
ChunLei Wang, JiChao Li, MingLei Zhao, Jian Liu, JiaLiang Zhang
Preparation and properties of multi-wall carbon nanotube/SiC composites by aqueous tape casting
ZhiHui Lü, DongLiang Jiang, JingXian Zhang, QingLing Lin
Preparation of TiO2 thin film by the LPD method on functionalized organic self-assembled monolayers
ZhongLiang He, ZhiWei Yu, HongYan Miao, GuoQiang Tan, Yan Liu
Modeling large reversible electric-field-induced strain in ferroelectric materials using 90° orientation switching
LinXiang Wang, Rong Liu, Roderick V. N. Melnik
Recycling of magnesium drive train components
Daniel Fechner, Carsten Blawert, Norbert Hort, Karl Ulrich Kainer
An improved neural network model for prediction of mechanical properties of magnesium alloys
AiTao Tang, Bin Liu, FuSheng Pan, Jing Zhang, Jian Peng, JingFeng Wang
Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature
JinBao Lin, LiMing Peng, QuDong Wang, J. R. Hans, WenJiang Ding
Superplasticity of Mg-5.8Zn-1Y-Zr alloy sheet fabricated by combination of extrusion and hot-rolling processes
Hong Yan, RongShi Chen, EnHou Han
Understanding of the influence of process parameters on the heat transfer behavior at the metal/die interface in high pressure die casting process
ZhiPeng Guo, ShouMei Xiong, BaiCheng Liu, Mei Li, John Allison
Examination of dynamic recrystallization during compression of AZ31 magnesium
RenLong Xin, BingShu Wang, XingPin Chen, GuangJie Huang, Qing Liu
Effects of electromagnetic field and lubricate condition on the surface quality of magnesium alloy billet during LFEC processing
QiChi Le, ZhiQiang Zhang, JianZhong Cui
Microstructure and texture evolution during warm compression of the magnesium alloy AZ31
Jia Jiang, Andy Godfreyb, Qing Liu
Synthesis of brookite-typed titania from titanium chloride solution
Satoshi Okano, Saeki Yamamuro, Toshiro Tanaka
Effect of the silicon powder content on the properties of Al2O3-SiC-Me composites
ZhiHui Zhang, GuoZhi Ruan, YunBo Chen
Performance of an activated carbon made from waste palm shell in simultaneous adsorption of SO x and NO x of flue gas at low temperature
S. Sumathi, S. Bhatia, K. T. Lee, A. R. Mohamed
Process optimization of reaction of acid leaching residue of asbestos tailing and sodium hydroxide aqueous solution
GaoXiang Du, ShuiLin Zheng, Hao Ding
Preparation and characterization of carbon pillared clay material
ZengZhi Zhang, ChunWei Yang, JunJie Niu
Characterization and normalization factors of abiotic resource depletion for life cycle impact assessment in China
Feng Gao, ZuoRen Nie, ZhiHong Wang, XianZheng Gong, TieYong Zuo
Sorption of Pb(II) from aqueous solution by konjac glucomannan beads
XiaoYan Long, XueGang Luo, Yang Wang, Zheng Li
Microwave absorbing properties and magnetic properties of different carbon nanotubes
XuChun Gui, KunLin Wang, JinQuan Wei, RuiTao Lü, QinKe Shu, Yi Jia, Chen Wang, HongWei Zhu, DeHai Wu
Introduction of fluorin into PBO polymer chains: Toward higher thermal stability and lower dielectric constant
Tao Zhang, DaYong Hu, JunHong Jin, ShengLin Yang, Guang Li, JianMing Jiang
Net-shape forming of composite packages with high thermal conductivity
XinBo He, XuanHui Qu, ShuBin Ren, ChengChang Jia
Light emission of double-walled carbon nanotube filaments doped with yttrium and europium
QinKe Shu, KunLin Wang, JinQuan Wei, HongWei Zhu, XinMing Li, Xi Chen, Yi Jia, XuChun Gui, ErYang Xu, DeHai Wu
Effects of Si and Ce on the microstructure and hydrogen storage property of Ti26.5Cr20V45Fe8.5Ce0.5 alloy
Jing Mi, XiaoPeng Liu, ZhiNian Li, LiJun Jiang, Zhuo Huang, ShuMao Wang
Fabrication and its characteristics of low-temperature polycrystalline silicon thin films
AiMin Wu, WanTing Deng, FuWen Qin, BoHai Li, J. Lassaut, Xin Jiang, Chuang Dong
Effect of Fe(III) impurity on the electrochemical performance of LiFePO4 prepared by hydrothermal process
XiuQin Ou, ShengZhao Xu, GuangChuan Liang, Li Wang, Xia Zhao
Cu2ZnSnS4 thin films prepared by sulfurizing different multilayer metal precursors
Jun Zhang, LeXi Shao