Skip to main content
main-content
Top

Journal

Science China Technological Sciences

Science China Technological Sciences 1/2012

Issue 1/2012

Special Topic on Material Sciences (1-42)

Table of Contents ( 32 Articles )

01-01-2012 | Issue 1/2012

Fabrication and characterization of implantable silicon neural probe with microfluidic channels

Kai Guo, WeiHua Pei, XiaoQian Li, Qiang Gui, RongYu Tang, Jian Liu, HongDa Chen

01-01-2012 | Issue 1/2012

Controlled fabrication and electrical-magnetic properties of Poly(OT-co-AN)/Ba0.8La0.2Al2Fe10O19 composites

KeYu Chen, QingQing Xu, LiangChao Li, GuoXiu Tong, HaiSheng Qian, QiuShi Xiao, Feng Xu

01-01-2012 | Issue 1/2012

Investigation on color variation of Morpho butterfly wings hierarchical structure based on PCA

Xuan Jiang, TieLin Shi, HaiBo Zuo, XueFeng Yang, WenJun Wu, GuangLan Liao

01-01-2012 | Issue 1/2012

A novel cerrobend block in the radiation therapy

ShuQuan Chang, Yu Zhang, Yu Dong, HongXu Zhang, YaoDong Dai

01-01-2012 | Issue 1/2012

Influence of filler morphology on percolation threshold of isotropical conductive adhesives (ICA)

Yu Tao, ZhenGuo Yang, XiaoLu Lu, GuoLiang Tao, YanPing Xia, HaiPing Wu

01-01-2012 | Issue 1/2012

Theoretical study on Manson-Coffin equation for physically short cracks and lifetime prediction

YanDong Hu, ZhiZhong Hu, ShuZhen Cao

01-01-2012 | Issue 1/2012

New organic scintillation fiber detector for the measurement of intense pulsed fission neutron

Liang Chen, XiaoPing Ouyang, ZhongBing Zhang, JinLiang Liu, XianPeng Zhang

01-01-2012 | Issue 1/2012

Modeling the impact of the viaduct on particles dispersion from vehicle exhaust in street canyons

ChuanFu Zhang, Mou Wen, JianRong Zeng, GuiLin Zhang, HaiPing Fang, Yan Li

01-01-2012 | Issue 1/2012

Micro-precision surface finishing using magneto-rheological fluid

WanLi Song, SeungBok Choi, DeukWon Lee, ChulHee Lee

01-01-2012 | Issue 1/2012

Kinematic generation of ruled surface based on rational motion of point-line

XiaoMing Zhang, LiMin Zhu, Han Ding, YouLun Xiong

01-01-2012 | Issue 1/2012

Mixed H2/H∞ road feel control of EPS based on genetic algorithm

WanZhong Zhao, ChunYan Wang

01-01-2012 | Issue 1/2012

Analysis of solid-liquid-gas interactions in landfilled municipal solid waste by a bio-hydro-mechanical coupled model

YunMin Chen, XiaoBing Xu, LiangTong Zhan

01-01-2012 | Issue 1/2012

A one-dimensional strain-rate based model for soft structured clays

ZhenYu Yin, JianHua Wang

01-01-2012 | Issue 1/2012

Simulation of construction shape-forming process of cable domes

JiHong Ye, RuoQiang Feng, Yuan Kan

01-01-2012 | Issue 1/2012

Studies on the influence of spar position on aeroelastic optimization of a large aircraft wing

ZhiQiang Wan, DongYue Liu, ChangHong Tang, Chao Yang

01-01-2012 | Issue 1/2012

Design and optimization of variable thrust hybrid rocket motors for sounding rockets

DaLin Rao, GuoBiao Cai, Hao Zhu, Hui Tian

01-01-2012 | Issue 1/2012

Inferring rules for adverse load combinations to crack in concrete dam from monitoring data using adaptive neuro-fuzzy inference system

HongZhong Xu, XueHong Li

01-01-2012 | Issue 1/2012

Design and evaluation of control systems for a real canal

YiZi Shang, Peter Rogers, GuangQian Wang

01-01-2012 | Issue 1/2012

Analysis of flow and heat transfer characteristics of micro-pin fin heat sink using silver nanofluids

MingZheng Zhou, GuoDong Xia, Lei Chai, Jian Li, LiJun Zhou

01-01-2012 | Issue 1/2012

Wind energy and wave energy resources assessment in the East China Sea and South China Sea

ChongWei Zheng, Hui Zhuang, Xin Li, XunQiang Li

01-01-2012 | Issue 1/2012

Numerical and experimental research on different inlet configurations of high speed centrifugal compressor

Du Li, Ce Yang, Mi Zhou, ZhiFu Zhu, Hang Wang

01-01-2012 | Issue 1/2012

Modeling the yaw dynamics of an unmanned helicopter through modes partition method

GuanLin Wang, Hui Xia, XiaMing Yuan, Yong Fan, JiHong Zhu

01-01-2012 | Issue 1/2012

Theoretical analysis of flamelet model for supersonic turbulent combustion

ZhouQin Fan, WeiDong Liu, MingBo Sun, ZhenGuo Wang, FengChen Zhuang, WenLei Luo

01-01-2012 | Issue 1/2012

End-effect of the permanent-magnet spherical motor and its influence on back-EMF characteristics

TingNa Shi, Peng Song, HongFeng Li, ChangLiang Xia

01-01-2012 | Issue 1/2012

Stable analysis on speed-adaptive observer in regenerating mode

Yi Ouyang, Martin Maerz

01-01-2012 | Issue 1/2012

Optimization based accurate scheduling for generation and reserve of power system

YunLong Gao, JinYan Pan, ZiJiang Yang, Feng Gao, GuoLi Ji

01-01-2012 | Issue 1/2012

Hybrid planning for LEO long-duration multi-spacecraft rendezvous mission

Jin Zhang, YaZhong Luo, GuoJin Tang

01-01-2012 | Issue 1/2012

On the treatment of solid boundary in smoothed particle hydrodynamics

MouBin Liu, JiaRu Shao, JianZhong Chang

01-01-2012 | Issue 1/2012

Influence of tunnel length on the pressure wave generated by high-speed trains passing each other

YiWei Wang, GuoWei Yang, ChengGuang Huang, Wei Wang

01-01-2012 | Issue 1/2012

Criteria of limiting temperature and parametric analysis of the large deflection behavior for fully restrained steel beams in fire

Feng Xi, YanPing Luan

01-01-2012 | Issue 1/2012

Development of the modified k-ɛ turbulence model of power-law fluid for engineering applications

Kyoungchul Ro, HongSun Ryou

01-01-2012 | Issue 1/2012

On new measurement and communication techniques of GNSS inter-satellite links

Yong Xu, Qing Chang, ZhiJian Yu

Current Publications

Premium Partner

    Image Credits