Skip to main content
Top
Published in:

08-06-2018

Seismic behavior of concentrically braced frames designed using direct displacement-based method

Authors: Dipti Ranjan Sahoo, Ankit Prakash

Published in: International Journal of Steel Structures | Issue 1/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This study is focussed on the evaluation of seismic performance of concentrically steel braced frames (CBFs) designed using direct displacement-based (DDBD) method. Design displacement profile in this method is derived from the inelastic mode shape normalized based on first story displacement. Design base shear of a structure is determined using design displacement spectrum and the equivalent viscous damping. Two low- and medium-rise CBFs, namely, 3-story and 6-story, are designed using DDBD method as well as current practice. These study frames are modelled and analysed in a computer software OpenSEES to compare their seismic performance under a set of selected ground motions. Braces are modelled using force-based fibre-discretized non-linear beam-column elements simulating the effects of inelastic buckling, large strain and low-cycle fatigue. The main parameters investigated are the maximum story displacements, the interstory drifts, the residual drifts and the yield mechanisms. DDBD frames exhibited the improved seismic response as compared to those design as per current practice.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference ANSI/AISC 341-10. (2010). Seismic provisions for structural steel buildings. Chicago, IL: American Institute of Steel Construction. ANSI/AISC 341-10. (2010). Seismic provisions for structural steel buildings. Chicago, IL: American Institute of Steel Construction.
go back to reference ASCE 7-10. (2010). Minimum design loads for buildings and other structures. Reston, VA: American Society of Civil Engineers. ASCE 7-10. (2010). Minimum design loads for buildings and other structures. Reston, VA: American Society of Civil Engineers.
go back to reference Chao, S.-H., Karki, N. B., & Sahoo, D. R. (2013). Seismic behavior of steel buildings with hybrid braced frames. ASCE Journal of Structural Engineering, 139(6), 1019–1032.CrossRef Chao, S.-H., Karki, N. B., & Sahoo, D. R. (2013). Seismic behavior of steel buildings with hybrid braced frames. ASCE Journal of Structural Engineering, 139(6), 1019–1032.CrossRef
go back to reference Chopra, A. K. (1995). Dynamics of structures: Theory and applications to earthquake engineering. Upper Saddle River, NJ: Prentice Hall.MATH Chopra, A. K. (1995). Dynamics of structures: Theory and applications to earthquake engineering. Upper Saddle River, NJ: Prentice Hall.MATH
go back to reference Della Corte, G, & Mazzolani, F. M. (2008). Theoretical developments and numerical verification of a displacement-based design procedure for steel braced structures. In Proceedings of the 14th world conference on earthquake engineering, Beijing. Della Corte, G, & Mazzolani, F. M. (2008). Theoretical developments and numerical verification of a displacement-based design procedure for steel braced structures. In Proceedings of the 14th world conference on earthquake engineering, Beijing.
go back to reference Eurocode 8. (2009). Design of structures for earthquake resistance—Part 1: general rules, seismic actions and rules for buildings, EN 1998-1:2004/AC:2009, Brussels. Eurocode 8. (2009). Design of structures for earthquake resistancePart 1: general rules, seismic actions and rules for buildings, EN 1998-1:2004/AC:2009, Brussels.
go back to reference Fajfar, P. (1998). Capacity spectrum method based on inelastic demand spectra. IKPIR Report EE-3/98, University of Ljubljana, Slovenia. Fajfar, P. (1998). Capacity spectrum method based on inelastic demand spectra. IKPIR Report EE-3/98, University of Ljubljana, Slovenia.
go back to reference Fajfar, P., & Gašperšič, P. (1996). The N2 method for the seismic damage analysis of RC buildings. Earthquake Engineering and Structural Dynamics, 25(1), 31–46.CrossRef Fajfar, P., & Gašperšič, P. (1996). The N2 method for the seismic damage analysis of RC buildings. Earthquake Engineering and Structural Dynamics, 25(1), 31–46.CrossRef
go back to reference FEMA 273. (1997). NEHRP guidelines for the seismic rehabilitation of buildings. Washington, DC: Federal Emergency Management Agency. FEMA 273. (1997). NEHRP guidelines for the seismic rehabilitation of buildings. Washington, DC: Federal Emergency Management Agency.
go back to reference FEMA 356. (2000). Pre-standard and commentary for the seismic rehabilitation of buildings (p. 2000). Washington, DC: Federal Emergency Management Agency. FEMA 356. (2000). Pre-standard and commentary for the seismic rehabilitation of buildings (p. 2000). Washington, DC: Federal Emergency Management Agency.
go back to reference Ghobarah, A. (2001). Performance-based design in earthquake engineering: state of development. Engineering Structures, 23, 878–884.CrossRef Ghobarah, A. (2001). Performance-based design in earthquake engineering: state of development. Engineering Structures, 23, 878–884.CrossRef
go back to reference Goel, S. C. & Chao, S. H. (2008). Performance-based plastic design-earthquake resistant steel structures. International Code Council. Goel, S. C. & Chao, S. H. (2008). Performance-based plastic design-earthquake resistant steel structures. International Code Council.
go back to reference Goggins, J. G., & Sullivan, T. J. (2009). Displacement-based seismic design of SDOF concentrically braced frames. In F. Mazzolani, J. M. Ricles & R. Sause (Eds.), STESSA 2009 (pp. 685–692). Milton Park: Taylor & Francis Group. Goggins, J. G., & Sullivan, T. J. (2009). Displacement-based seismic design of SDOF concentrically braced frames. In F. Mazzolani, J. M. Ricles & R. Sause (Eds.), STESSA 2009 (pp. 685–692). Milton Park: Taylor & Francis Group.
go back to reference Kumar, P. C. A., & Sahoo, D. R. (2016). Optimum range of slenderness ratio of HSS braces for special concentric braced frames. Advances in Structural Engineering, 19(6), 928–944.CrossRef Kumar, P. C. A., & Sahoo, D. R. (2016). Optimum range of slenderness ratio of HSS braces for special concentric braced frames. Advances in Structural Engineering, 19(6), 928–944.CrossRef
go back to reference Kumar, P. C. A., Sahoo, D. R., & Kumar, N. (2015). Limiting values of slenderness ratio for circular braces of concentrically braced frames. Journal of Constructional Steel Research, 115, 223–235.CrossRef Kumar, P. C. A., Sahoo, D. R., & Kumar, N. (2015). Limiting values of slenderness ratio for circular braces of concentrically braced frames. Journal of Constructional Steel Research, 115, 223–235.CrossRef
go back to reference Lee, H.-S., & Goel, S. C. (1990). Seismic behavior of steel built-up box shaped bracing members and their use in strengthening reinforced concrete frames. Rep. No. UMCE 90-7, Dept. of Civil and Environmental Engineering, Univ. of Michigan, Ann Arbor, MI. Lee, H.-S., & Goel, S. C. (1990). Seismic behavior of steel built-up box shaped bracing members and their use in strengthening reinforced concrete frames. Rep. No. UMCE 90-7, Dept. of Civil and Environmental Engineering, Univ. of Michigan, Ann Arbor, MI.
go back to reference McKenna, F., Fenves, G. L., Jeremic, B., & Scott, M. H. (2007). Open system for earthquake engineering simulation (OpenSEES). Berkeley, CA: University of California. McKenna, F., Fenves, G. L., Jeremic, B., & Scott, M. H. (2007). Open system for earthquake engineering simulation (OpenSEES). Berkeley, CA: University of California.
go back to reference O’Reilly, G., Goggins, J., & Mahin, S. (2012). Performance-based design of a self-centering concentrically braced frame using the direct displacement-based design procedure. In Proceedings of the 15th world conference on earthquake engineering. Lisbon, Portugal. O’Reilly, G., Goggins, J., & Mahin, S. (2012). Performance-based design of a self-centering concentrically braced frame using the direct displacement-based design procedure. In Proceedings of the 15th world conference on earthquake engineering. Lisbon, Portugal.
go back to reference Priestley, M. J. N. (2000). Performance-based seismic design. In Proceeidngs of the 12th world conference on earthquake engineering, Auckland. Priestley, M. J. N. (2000). Performance-based seismic design. In Proceeidngs of the 12th world conference on earthquake engineering, Auckland.
go back to reference Priestley, M. J. N., Calvi, G. M., & Kowalsky, M. J. (2007). Displacement-based seismic design of structures (p. 721). Pvia: IUSS Press. Priestley, M. J. N., Calvi, G. M., & Kowalsky, M. J. (2007). Displacement-based seismic design of structures (p. 721). Pvia: IUSS Press.
go back to reference Sabelli R. (2000). Research on improving the design and analysis of earthquake resistant steel braced frames. FEMA/EERI report, Federal Emergency Management Agency, Washington, DC. Sabelli R. (2000). Research on improving the design and analysis of earthquake resistant steel braced frames. FEMA/EERI report, Federal Emergency Management Agency, Washington, DC.
go back to reference Sahoo, D. R., & Chao, S.-H. (2010). Performance-based plastic design of buckling-restrained braced frames. Engineering Structures, 32(9), 2950–2958.CrossRef Sahoo, D. R., & Chao, S.-H. (2010). Performance-based plastic design of buckling-restrained braced frames. Engineering Structures, 32(9), 2950–2958.CrossRef
go back to reference Sahoo, D. R., & Rai, D. C. (2013). Design and evaluation of seismic strengthening techniques for RC buildings with soft-story. Engineering Structures, 56(11), 1933–1944.CrossRef Sahoo, D. R., & Rai, D. C. (2013). Design and evaluation of seismic strengthening techniques for RC buildings with soft-story. Engineering Structures, 56(11), 1933–1944.CrossRef
go back to reference Salawdeh, S., & Goggin, J. G. (2012). Direct displacement based seismic design of multi-storey concentrically braced frame structures. IABSE symposium report, global thinking in structural engineering: Recent achievements, (Vol. 98, No. 1, pp. 1–8). International Association for Bridge and Structural Engineering. Salawdeh, S., & Goggin, J. G. (2012). Direct displacement based seismic design of multi-storey concentrically braced frame structures. IABSE symposium report, global thinking in structural engineering: Recent achievements, (Vol. 98, No. 1, pp. 1–8). International Association for Bridge and Structural Engineering.
go back to reference Salawdeh, S., & Goggins, J. (2013). Numerical model for steel brace members incorporating brace members incorporating a fatigue model. Engineering Structures, 46, 332–349.CrossRef Salawdeh, S., & Goggins, J. (2013). Numerical model for steel brace members incorporating brace members incorporating a fatigue model. Engineering Structures, 46, 332–349.CrossRef
go back to reference Somerville P. G., Smith M., Punyamurthula S., & Sun J. (1997). Development of ground motion time histories for phase 2 of the FEMA/SAC steel project. Report No. SAC/BD-97/04, Sacramento, CA. Somerville P. G., Smith M., Punyamurthula S., & Sun J. (1997). Development of ground motion time histories for phase 2 of the FEMA/SAC steel project. Report No. SAC/BD-97/04, Sacramento, CA.
go back to reference Tang, X., & Goel, S. C. (1987). Seismic analysis and design considerations of braced steel structures. Report No. UMCEE 87-04, Department of Civil Engineering, University of Michigan, MI, USA. Tang, X., & Goel, S. C. (1987). Seismic analysis and design considerations of braced steel structures. Report No. UMCEE 87-04, Department of Civil Engineering, University of Michigan, MI, USA.
go back to reference Tremblay, R. (2002). Inelastic seismic response of steel bracing members. Journal of Constructional Steel Research, 58, 665–701.CrossRef Tremblay, R. (2002). Inelastic seismic response of steel bracing members. Journal of Constructional Steel Research, 58, 665–701.CrossRef
go back to reference Uriz, P., Filippou, F. C., & Mahin, S. A. (2008). Model for cyclic inelastic buckling of steel braces. ASCE Journal of Structural Engineering, 134, 619–628.CrossRef Uriz, P., Filippou, F. C., & Mahin, S. A. (2008). Model for cyclic inelastic buckling of steel braces. ASCE Journal of Structural Engineering, 134, 619–628.CrossRef
go back to reference Wijesundara, K. (2009). Design of concentrically braced steel frames with RHS shape braces. Doctoral thesis, European Centre for Training and Research in Earthquake Engineering (EUCENTRE), Pavia, Italy. Wijesundara, K. (2009). Design of concentrically braced steel frames with RHS shape braces. Doctoral thesis, European Centre for Training and Research in Earthquake Engineering (EUCENTRE), Pavia, Italy.
go back to reference Wijesundara, K. K. (2012). Seismic design of steel concentric braced frame structures using direct displacement based design approach. In Proceedings of the 2nd international conference on sustainable built environments (ICSBE 2012), Sri Lanka. Wijesundara, K. K. (2012). Seismic design of steel concentric braced frame structures using direct displacement based design approach. In Proceedings of the 2nd international conference on sustainable built environments (ICSBE 2012), Sri Lanka.
go back to reference Wijesundara, K. K., Nascimbene, R., & Sullivan, T. J. (2011). Equivalent viscous damping for steel concentrically braced frame structures. Bulletin of Earthquake Engineering, 9(5), 1535–1558.CrossRef Wijesundara, K. K., Nascimbene, R., & Sullivan, T. J. (2011). Equivalent viscous damping for steel concentrically braced frame structures. Bulletin of Earthquake Engineering, 9(5), 1535–1558.CrossRef
Metadata
Title
Seismic behavior of concentrically braced frames designed using direct displacement-based method
Authors
Dipti Ranjan Sahoo
Ankit Prakash
Publication date
08-06-2018
Publisher
Korean Society of Steel Construction
Published in
International Journal of Steel Structures / Issue 1/2019
Print ISSN: 1598-2351
Electronic ISSN: 2093-6311
DOI
https://doi.org/10.1007/s13296-018-0092-0

Premium Partners