Skip to main content
main-content
Top

Hint

Swipe to navigate through the articles of this issue

Published in: Metallurgist 7-8/2011

01-11-2011

Selecting regimes for the delivery of slag-forming mixtures and oscillation of the molds on continuous casters

Authors: A. V. Kuklev, Yu. M. Aizin, I. F. Goncharevich, S. V. Shcheglov

Published in: Metallurgist | Issue 7-8/2011

Login to get access
share
SHARE

Abstract

This article examines slag-forming mixture (SFM) feed regimes that provide for effective lubrication in continuous-caster molds and reduce the stresses in the skin of the continuous-cast semifinished product. It is shown that use of the mold oscillation regimes developed by the KORAD Corporation solves these problems and ensures dynamic balancing of the substantial loads that act on the structural elements of the caster during the vibration of massive molds.
Literature
1.
go back to reference V. M. Parshin, I. F. Goncharevich, A. V. Kuklev, et al., Russian Federation Patent No. 2378083, MPK B22D11/051, “Method for the continuous casting of steel,” No. 2008140037.02, publ 01.10.2010, Byull., No. 1. V. M. Parshin, I. F. Goncharevich, A. V. Kuklev, et al., Russian Federation Patent No. 2378083, MPK B22D11/051, “Method for the continuous casting of steel,” No. 2008140037.02, publ 01.10.2010, Byull., No. 1.
2.
go back to reference A. V. Kuklev, I. F. Goncharevich, Yu. M. Aizin, and S.Yu. Boiko, “Investigation of the technological and dynamic regimes of continuous-caster molds with a spring system and a hydraulic drive,” Problems of the Mechanics of Modern Machinery: Proc. 4th Int. Conf., VSGTU, Ulan-Ude (2009). A. V. Kuklev, I. F. Goncharevich, Yu. M. Aizin, and S.Yu. Boiko, “Investigation of the technological and dynamic regimes of continuous-caster molds with a spring system and a hydraulic drive,” Problems of the Mechanics of Modern Machinery: Proc. 4th Int. Conf., VSGTU, Ulan-Ude (2009).
3.
go back to reference A. V. Kuklev, I. F. Goncharevich, and Yu. M. Aizin, “Choosing efficient regimes for feeding lubricant into the molds of continuous steel-casting machines,” Vestn. Mashinostr., No. 12 (2009). A. V. Kuklev, I. F. Goncharevich, and Yu. M. Aizin, “Choosing efficient regimes for feeding lubricant into the molds of continuous steel-casting machines,” Vestn. Mashinostr., No. 12 (2009).
4.
go back to reference A. V. Kuklev,Yu. M. Zizin, I. F. Goncharevich, and V. I. Danilov, “Computer methods of estimation of efficient process conditions of the CCM’s casting mold,” 6th ECCC, Riccione, Italy, June 2008. A. V. Kuklev,Yu. M. Zizin, I. F. Goncharevich, and V. I. Danilov, “Computer methods of estimation of efficient process conditions of the CCM’s casting mold,” 6th ECCC, Riccione, Italy, June 2008.
5.
go back to reference A. V. Kuklev, I. F. Goncharevich,Yu. M. Aizin, S. Yu. Boiko, and A. Yu. Manuilov, “Experience with the development and introduction of a continuous steel-casting machine with a spring suspension and a hydraulic drive,” 10th Congress of Steelmakers (2008). A. V. Kuklev, I. F. Goncharevich,Yu. M. Aizin, S. Yu. Boiko, and A. Yu. Manuilov, “Experience with the development and introduction of a continuous steel-casting machine with a spring suspension and a hydraulic drive,” 10th Congress of Steelmakers (2008).
6.
go back to reference A. V. Kuklev, I. F. Goncharevich, Yu. M. Aizin, and S. Yu. Boiko, “Investigation of the technological and dynamic regimes of continuous-caster molds with a spring system and a hydraulic drive,” Problems of the Mechanics of Modern Machinery: Proc. 4th Int. Conf., VSGTU, Ulan-Ude (2009). A. V. Kuklev, I. F. Goncharevich, Yu. M. Aizin, and S. Yu. Boiko, “Investigation of the technological and dynamic regimes of continuous-caster molds with a spring system and a hydraulic drive,” Problems of the Mechanics of Modern Machinery: Proc. 4th Int. Conf., VSGTU, Ulan-Ude (2009).
7.
go back to reference A. V. Kuklev,Yu. M. Aizin, I. F. Goncharevich, and A. V. Manuilov, “Aspects of the feed of a slag-forming mixture into continuous-caster molds,” Metallurg, No. 5, 40–41 (2009). A. V. Kuklev,Yu. M. Aizin, I. F. Goncharevich, and A. V. Manuilov, “Aspects of the feed of a slag-forming mixture into continuous-caster molds,” Metallurg, No. 5, 40–41 (2009).
8.
go back to reference A. V. Kuklev, Yu. M. Aizin, I. F. Goncharevich, and S. Yu. Boiko, “Modernizing the suspension system of continuous-caster molds,” Metallurg, No. 8, 47–49 (2009). A. V. Kuklev, Yu. M. Aizin, I. F. Goncharevich, and S. Yu. Boiko, “Modernizing the suspension system of continuous-caster molds,” Metallurg, No. 8, 47–49 (2009).
Metadata
Title
Selecting regimes for the delivery of slag-forming mixtures and oscillation of the molds on continuous casters
Authors
A. V. Kuklev
Yu. M. Aizin
I. F. Goncharevich
S. V. Shcheglov
Publication date
01-11-2011
Publisher
Springer US
Published in
Metallurgist / Issue 7-8/2011
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-011-9469-4

Other articles of this Issue 7-8/2011

Metallurgist 7-8/2011 Go to the issue

Premium Partners