Skip to main content
Top

2019 | OriginalPaper | Chapter

11. Selective Disassembly Planning for Waste Electrical and Electronic Equipment with Case Studies on Liquid Crystal Displays

Authors : W. D. Li, K. Xia, L. Gao, K. M. Chao

Published in: Sustainable Manufacturing and Remanufacturing Management

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Waste Electrical and Electronic Equipment (WEEE) is one of the most significant waste streams in modern societies. In the past decade, disassembly of WEEE to support remanufacturing and recycling has been growingly adopted by industries. With the increasing customization and diversity of Electrical and Electronic Equipment (EEE) and more complex assembly processes, full disassembly of WEEE is rarely an ideal solution due to high disassembly cost. Selective disassembly, which prioritizes operations for partial disassembly according to the legislative and economic considerations of specific stakeholders, is becoming an important but still challenging research topic in recent years. In order to address the issue effectively, in this chapter, a particle swarm optimization (PSO)-based selective disassembly planning method embedded with customizable decision-making models and a novel generic constraint handling algorithm has been developed. With multi-criteria and adaptive decision-making models, the developed method is flexible to handle WEEE to meet the various requirements of stakeholders. Based on the generic constraint handling and intelligent optimization algorithms, the developed research is capable to process complex constraints and achieve optimized selective disassembly plans. Industrial cases on liquid crystal display (LCD) televisions have been used to verify and demonstrate the effectiveness and robustness of the research in different application scenarios.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Jovane, F., Yoshikawa, H., Alting, L., Boer, C. R., Westkamper, E., Williams, D., et al. (2008). The incoming global technological and industrial revolution towards competitive sustainable manufacturing. CIRP Annals Manufacturing Technology, 75, 641–659.CrossRef Jovane, F., Yoshikawa, H., Alting, L., Boer, C. R., Westkamper, E., Williams, D., et al. (2008). The incoming global technological and industrial revolution towards competitive sustainable manufacturing. CIRP Annals Manufacturing Technology, 75, 641–659.CrossRef
2.
go back to reference Walther, G., Steinborn, J., Spengler, T. S., Luger, T., & Herrmann, C. (2010). Implementation of the WEEE-directive—Economic effects and improvement potentials for reuse and recycling in Germany. International Journal of Advanced Manufacturing Technology, 47, 461–474.CrossRef Walther, G., Steinborn, J., Spengler, T. S., Luger, T., & Herrmann, C. (2010). Implementation of the WEEE-directive—Economic effects and improvement potentials for reuse and recycling in Germany. International Journal of Advanced Manufacturing Technology, 47, 461–474.CrossRef
3.
go back to reference Hicks, C., Dietmar, R., & Eugster, M. (2005). The recycling and disposal of electrical and electronic waste in China—Legislative and market responses. Environmental Impact Assessment Review, 25, 459–471.CrossRef Hicks, C., Dietmar, R., & Eugster, M. (2005). The recycling and disposal of electrical and electronic waste in China—Legislative and market responses. Environmental Impact Assessment Review, 25, 459–471.CrossRef
4.
go back to reference Kopacek, B., & Kopacek, P. (1999). Intelligent disassembly of electronic equipment. Annual Reviews in Control, 23, 165–170.CrossRef Kopacek, B., & Kopacek, P. (1999). Intelligent disassembly of electronic equipment. Annual Reviews in Control, 23, 165–170.CrossRef
5.
go back to reference Duflou, J. R., Seliger, G., Kara, S., Umeda, Y., Ometto, A., & Willems, B. (2008). Efficiency and feasibility of product disassembly: A case-based study. CIRP Annals Manufacturing Technology, 57, 583–600.CrossRef Duflou, J. R., Seliger, G., Kara, S., Umeda, Y., Ometto, A., & Willems, B. (2008). Efficiency and feasibility of product disassembly: A case-based study. CIRP Annals Manufacturing Technology, 57, 583–600.CrossRef
6.
go back to reference Kernbaum, S., Heyer, S., Chiotellis, S., & Seliger, G. (2009). Process planning for IT-equipment remanufacturing. CIRP Journal of Manufacturing Science and Technology, 2, 13–20.CrossRef Kernbaum, S., Heyer, S., Chiotellis, S., & Seliger, G. (2009). Process planning for IT-equipment remanufacturing. CIRP Journal of Manufacturing Science and Technology, 2, 13–20.CrossRef
7.
go back to reference Hatcher, G. D., Ijomah, W. L., & Windmill, J. F. C. (2011). Design for remanufacturing: A literature survey and future research needs. Journal of Cleaner Production, 19, 2004–2014.CrossRef Hatcher, G. D., Ijomah, W. L., & Windmill, J. F. C. (2011). Design for remanufacturing: A literature survey and future research needs. Journal of Cleaner Production, 19, 2004–2014.CrossRef
8.
go back to reference Mayers, C. K. (2007). Strategic, financial, and design implications of extended producer responsibility in Europe: A producer case study. Journal of Industrial Ecology, 11, 113–131.CrossRef Mayers, C. K. (2007). Strategic, financial, and design implications of extended producer responsibility in Europe: A producer case study. Journal of Industrial Ecology, 11, 113–131.CrossRef
10.
go back to reference Giuntini, R., & Gaudette, K. (2003). Remanufacturing: The next great opportunity for boosting US productivity. Business Horizons, 41–48. Giuntini, R., & Gaudette, K. (2003). Remanufacturing: The next great opportunity for boosting US productivity. Business Horizons, 41–48.
11.
go back to reference Kara, S., Pornprasitpol, P., & Kaebernick, H. (2006). Selective disassembly sequencing: A methodology for the disassembly of end-of-life products. CIRP Annals Manufacturing Technology, 55(1), 37–40.CrossRef Kara, S., Pornprasitpol, P., & Kaebernick, H. (2006). Selective disassembly sequencing: A methodology for the disassembly of end-of-life products. CIRP Annals Manufacturing Technology, 55(1), 37–40.CrossRef
12.
go back to reference Masui, K., Mizuhara, K., Ishii, K., & Rose, C. (1999). Development of products embedded disassembly process based on end-of-life strategies. In Proceedings of the EcoDesign’99: 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, pp. 570–575. Masui, K., Mizuhara, K., Ishii, K., & Rose, C. (1999). Development of products embedded disassembly process based on end-of-life strategies. In Proceedings of the EcoDesign’99: 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, pp. 570–575.
13.
go back to reference Chiodo, J. D., Harrison, D. J., & Billett, E. H. (2001). An initial investigation into active disassembly using shape memory polymers. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215(5), 733–741.CrossRef Chiodo, J. D., Harrison, D. J., & Billett, E. H. (2001). An initial investigation into active disassembly using shape memory polymers. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215(5), 733–741.CrossRef
14.
go back to reference Jones, N., Harrison, D., Billett, E., & Chiodo, J. (2004). Electrically self-powered active disassembly. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(7), 689–697.CrossRef Jones, N., Harrison, D., Billett, E., & Chiodo, J. (2004). Electrically self-powered active disassembly. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(7), 689–697.CrossRef
15.
go back to reference Braunschweig, A. (2004). Automatic disassembly of snap-in joints in electromechanical devices. In Proceedings of the 4th International Congress Mechanical Engineering Technologies’04, Varna, pp. 48–56. Braunschweig, A. (2004). Automatic disassembly of snap-in joints in electromechanical devices. In Proceedings of the 4th International Congress Mechanical Engineering Technologies’04, Varna, pp. 48–56.
16.
go back to reference Hussein, H., & Harrison, D. (2008). New technologies for active disassembly: Using the shape memory effect in engineering polymers. International Journal of Product Development, 6(3/4), 431–449.CrossRef Hussein, H., & Harrison, D. (2008). New technologies for active disassembly: Using the shape memory effect in engineering polymers. International Journal of Product Development, 6(3/4), 431–449.CrossRef
17.
go back to reference Ijomah, W. L., & Chiodo, J. D. (2010). Application of active disassembly to extend profitable remanufacturing in small electrical and electronic products. International Journal of Sustainable Engineering, 3(4), 246–257.CrossRef Ijomah, W. L., & Chiodo, J. D. (2010). Application of active disassembly to extend profitable remanufacturing in small electrical and electronic products. International Journal of Sustainable Engineering, 3(4), 246–257.CrossRef
18.
go back to reference Sundin, E., Lindahl, M., & Ijomah, W. (2009). Product design for product/service systems—Design experiences from Swedish industry. Journal of Manufacturing Technology Management, 20(5), 723–753.CrossRef Sundin, E., Lindahl, M., & Ijomah, W. (2009). Product design for product/service systems—Design experiences from Swedish industry. Journal of Manufacturing Technology Management, 20(5), 723–753.CrossRef
19.
go back to reference Dindarian, A., Gibson, A. A. P., & Quariguasi-Frota-Neto, J. (2012). Electronic product returns and potential reuse opportunities: A microwave case study in the United Kingdom. Journal of Cleaner Production, 32, 22–31.CrossRef Dindarian, A., Gibson, A. A. P., & Quariguasi-Frota-Neto, J. (2012). Electronic product returns and potential reuse opportunities: A microwave case study in the United Kingdom. Journal of Cleaner Production, 32, 22–31.CrossRef
20.
go back to reference Santochi, M., Dini, G., & Failli, F. (2002). Computer aided disassembly planning: State of the arts and perspectives. CIRP Annals Manufacturing Technology, 51(2), 507–529.CrossRef Santochi, M., Dini, G., & Failli, F. (2002). Computer aided disassembly planning: State of the arts and perspectives. CIRP Annals Manufacturing Technology, 51(2), 507–529.CrossRef
21.
go back to reference Lambert, A. J. D. (2002). Determining optimum disassembly sequences in electronic equipment. Computers & Industrial Engineering, 43(3), 553–575.CrossRef Lambert, A. J. D. (2002). Determining optimum disassembly sequences in electronic equipment. Computers & Industrial Engineering, 43(3), 553–575.CrossRef
22.
go back to reference Kuo, T. C. (2012). Waste electronics and electrical equipment disassembly and recycling using Petri net analysis: Considering the economic value and environmental impacts. Computers & Industrial Engineering, 65, 54.CrossRef Kuo, T. C. (2012). Waste electronics and electrical equipment disassembly and recycling using Petri net analysis: Considering the economic value and environmental impacts. Computers & Industrial Engineering, 65, 54.CrossRef
23.
go back to reference Renteria, A., Alvarez, E., Perez, J., & Pozo, D. (2011). A methodology to optimize the recycling process of WEEE: Case of television sets and monitors. International Journal of Advanced Manufacturing Technology, 54, 789–800.CrossRef Renteria, A., Alvarez, E., Perez, J., & Pozo, D. (2011). A methodology to optimize the recycling process of WEEE: Case of television sets and monitors. International Journal of Advanced Manufacturing Technology, 54, 789–800.CrossRef
24.
go back to reference Ryan, A., O’Donoghue, L., & Lewis, H. (2011). Characterising components of liquid crystal displays to facilitate disassembly. Journal of Cleaner Production, 19, 1066–1071.CrossRef Ryan, A., O’Donoghue, L., & Lewis, H. (2011). Characterising components of liquid crystal displays to facilitate disassembly. Journal of Cleaner Production, 19, 1066–1071.CrossRef
25.
go back to reference Li, W. D., Ong, S. K., & Nee, A. Y. C. (2002). Hybrid genetic algorithm and simulated annealing approach for the optimization of process plans for prismatic parts. International Journal of Production Research, 40(8), 1899–1922.CrossRef Li, W. D., Ong, S. K., & Nee, A. Y. C. (2002). Hybrid genetic algorithm and simulated annealing approach for the optimization of process plans for prismatic parts. International Journal of Production Research, 40(8), 1899–1922.CrossRef
26.
go back to reference Li, W. D., & McMahon, C. A. (2007). A simulated annealing-based optimization approach for integrated process planning and scheduling. International Journal of Computer Integrated Manufacturing, 20(1), 80–95.CrossRef Li, W. D., & McMahon, C. A. (2007). A simulated annealing-based optimization approach for integrated process planning and scheduling. International Journal of Computer Integrated Manufacturing, 20(1), 80–95.CrossRef
27.
go back to reference Kennedy, J., & Eberhart, R. (1995). Particle swarm optimization. In Proceedings of IEEE International Conference on Neural Networks (Vol. IV, pp. 1942–1948). Kennedy, J., & Eberhart, R. (1995). Particle swarm optimization. In Proceedings of IEEE International Conference on Neural Networks (Vol. IV, pp. 1942–1948).
28.
go back to reference Lambert, A. J. D., & Gupta, S. M. (2005). Disassembly modelling for assembly, maintenance, reuse, and recycling. Boca Raton, FL: CRC Press.MATH Lambert, A. J. D., & Gupta, S. M. (2005). Disassembly modelling for assembly, maintenance, reuse, and recycling. Boca Raton, FL: CRC Press.MATH
29.
go back to reference Reddy, S. V. B., Shunmugam, M. S., & Narendran, T. T. (1999). Operation sequencing in CAPP using genetic algorithm. International Journal of Production Research, 37, 1063–1074.CrossRef Reddy, S. V. B., Shunmugam, M. S., & Narendran, T. T. (1999). Operation sequencing in CAPP using genetic algorithm. International Journal of Production Research, 37, 1063–1074.CrossRef
Metadata
Title
Selective Disassembly Planning for Waste Electrical and Electronic Equipment with Case Studies on Liquid Crystal Displays
Authors
W. D. Li
K. Xia
L. Gao
K. M. Chao
Copyright Year
2019
DOI
https://doi.org/10.1007/978-3-319-73488-0_11

Premium Partners