Top

Published in:

2019 | OriginalPaper | Chapter

Separation of Impulse from Oscillation for Detection of Bearing Defect in the Vibration Signal

Authors : Anil Kumar, Ravi Prakash, Rajesh Kumar

Published in: Advances in Condition Monitoring of Machinery in Non-Stationary Operations

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Toward ever improvement technology, a diagnostic procedure making use of Dual Q-Factor wavelet decomposition (DQWD) and adaptive wavelet transform (AWT) is proposed for the extraction of weak bearing defect feature. The vibration signal of bearing consists of mix of transient impulse (low-Q factor) and oscillatory signal (high-Q factor signal). Therefore, to separate the two different behavioral signals, Dual Q-factor wavelet decomposition is carried out. The DQWD decompose any signal into low-Q factor and high-Q factor signal. Further, extraction of feature is carried out by adaptive wavelet transform. For this adaptive wavelet is extracted from the low-Q factor signal using least square fitting method. The generated wavelet is applied to low-Q factor signal to produce AWT scalogram. Then, coefficients of resulting scalogram are integrated with respect to scale for each time segment. Then, envelope demodulation is applied to the resulting waveform to spot the defect frequency. An experimental study is presented to show the effectiveness of the proposed method. The proposed method is also effective over EMD and EEMD technique in isolating the transient impulse of defect from the oscillatory part of the signal.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Ferroresonance Detection in Voltage Transformers Through Vibration Monitoring

next chapter A Comparison of Frequency Demodulation Methods to Determine the Instantaneous Angular Speed of a Machine

Cai G, Chen X, He Z (2013) Sparsity-enabled signal decomposition using tunable Q-factor wavelet transform for fault feature extraction of gearbox. Mech Syst Signal Process 41:34–53. https://doi.org/10.1016/j.ymssp.2013.06.035CrossRef

Hong H, Liang M (2009) Fault severity assessment for rolling element bearings using the Lempel-Ziv complexity and continuous wavelet transform. J Sound Vib 320(1–2):452–468. https://doi.org/10.1016/j.jsv.2008.07.011CrossRef

Kumar A, Kumar R (2017a) Least square fitting for adaptive wavelet generation and automatic prediction of defect size in the bearing using Levenberg–Marquardt Backpropagation. J Nondestruct Eval 36(1). https://doi.org/10.1007/s10921-016-0385-1

Kumar A, Kumar R (2017b). Adaptive artificial intelligence for automatic identification of defect in the angular contact bearing. Neural Comput Appl 1–11. https://doi.org/10.1007/s00521-017-3123-4CrossRef

Kumar A Kumar R (2017c) Oscillatory behaviour based wavelet decomposition for bearing condition monitoring in the centrifugal pumps. Proc IMechE, Part J: J Eng Tribol. (in press). http://doi.org/10.1177/1350650117727976CrossRef

Liang B, Iwnicki SD, Zhao Y (2013) Application of power spectrum, cepstrum, higher order spectrum and neural network analyses for induction motor fault diagnosis. Mech Syst Signal Process 39(1–2):342–360. https://doi.org/10.1016/j.ymssp.2013.02.016CrossRef

McFadden PD, Smith JD (1984) Vibration monitoring of rolling element bearings by the high-frequency resonance technique — a review. Tribol Int 17(1):3–10. https://doi.org/10.1016/0301-679X(84)90076-8CrossRef

Ming AB, Zhang W, Qin ZY, Chu FL (2015) Envelope calculation of the multi-component signal and its application to the deterministic component cancellation in bearing fault diagnosis. Mech Syst Signal Process 50–51:70–100. https://doi.org/10.1016/j.ymssp.2014.05.033CrossRef

Randall RB, Antoni J (2011) Rolling element bearing diagnostics-a tutorial. Mech Syst Signal Process 25(2):485–520. https://doi.org/10.1016/j.ymssp.2010.07.017CrossRef

Selesnick IW (2011) Wavelet transform with tunable Q-factor. IEEE Trans Signal Process 59(8):3560–3575. https://doi.org/10.1109/TSP.2011.2143711MathSciNetCrossRefMATH

Singh M, Yadav RK, Kumar R (2013) Discrete wavelet transform based measurement of inner race defect width in taper roller bearing. Mapan-J Metrol Soc I 28(1):17–23. https://doi.org/10.1007/s12647-013-0045-1CrossRef

Wang H, Chen J, Dong G (2014) Feature extraction of rolling bearing’s early weak fault based on EEMD and tunable Q-factor wavelet transform. J Sound Vib 48(1–2):103–119. https://doi.org/10.1016/j.ymssp.2014.04.006CrossRef

Wang Y, Xu G, Liang L, Jiang K (2015) Detection of weak transient signals based on wavelet packet transform and manifold learning for rolling element bearing fault diagnosis. Mech Syst Signal Process 54:259–276. https://doi.org/10.1016/j.ymssp.2014.09.002CrossRef

Zhang Y, Bingham C, Yang Z, Ling BW-K, Gallimore M (2014) Machine fault detection by signal denoising—with application to industrial gas turbines. Measurement 58:230–240. https://doi.org/10.1016/j.measurement.2014.08.020CrossRef

Title: Separation of Impulse from Oscillation for Detection of Bearing Defect in the Vibration Signal
Authors: Anil Kumar
Ravi Prakash
Rajesh Kumar
Publisher: Springer International Publishing
Book: Advances in Condition Monitoring of Machinery in Non-Stationary Operations
Print ISBN: 978-3-030-11219-6

Electronic ISBN: 978-3-030-11220-2

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-030-11220-2_29

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners