Top

Published in:

2023 | OriginalPaper | Chapter

Simulation of Tensile Test for Laminate Made of CFRP. Role of Different Parameters that Influence the Failure Mode Type

Authors : Nikolay Turbin, Sergei Kovtunov

Published in: Proceedings of the International Conference on Aerospace System Science and Engineering 2022

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The tensile test of composite material sample is a traditional mean of obtaining its strength and stiffness. The standard for conducting this experiment is ASTM D3039, where the general requirements, tooling and parameters of loading are presented. In the meantime the standard provides several modes of sample’s failure, which are likely to be met in practice. By default, the failure location in the middle of specimen is the most desirable (denoted as LGM). Other modes of failure might be treated as unacceptable result of testing, for example splitting of the material parallel to loading direction (denoted as SGM). There are many studies researching the influence of different parameters on failure mode and depending on them, the different failure modes were obtained. In current paper the attained results intersect with a results produced previously by few of other studies. The simulation via finite elements method (FEM) can become helpful instrument in assessment of sensitivity of localization and nature of failure to different parameters, such as material system used, geometry of the sample and tooling.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Effects of Gap Width on Vibration Response of Aileron-Cabin-Model Due to Acoustic-Structure Coupling

next chapter SysML-Based Approach for Functional Modeling of Civil Aircraft Systems

Abhishek, K.P., Tomohiro, Y., Masahiro, I., Kazuhiro, K.: In-situ observation of tensile failure mode in cross-ply CFRP laminates using Talbot-Lau interferometry. Compos. Struct. 253, 112758 (2020). https://doi.org/10.31838/jcr.07.12.199CrossRef

Behera, A., Thawre, M.M., Ballal, A.: Failure analysis of CFRP multidirectional laminates using the probabilistic weibull distribution model under static loading. Fibers Polym. 20(11), 2390–2399 (2019). https://doi.org/10.1007/s12221-019-1194-9CrossRef

ASTM D3039: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials (ASTM International, United States) (2000). https://www.astm.org/Standards/D3039

ASTM D3518: Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate (ASTM International, United States) (2007). https://standards.globalspec.com/std/13112493/astm-d3518-d3518m

Aswani, K.B., Shivdayal, P., Yogesh, S., Suhail, A., Alagirusamy, R., Naresh, B.: Mechanical behavior of Kevlar/basalt reinforced polypropylene composites. Compos. A 90, 642–652 (2016). https://doi.org/10.1016/j.compositesa.2016.08.031CrossRef

Bak, K.M., Raj, K.G., Ramasamy, N., Vijayanandh, R.: Experimental and numerical studies on the mechanical characterization of EPDM/ S-SBR nano clay composites. IOP Conf. Ser. Mater. Sci. Eng. 912, 052016 (2020). https://iopscience.iop.org/article/10.1088/1757-899X/912/5/052016CrossRef

Bhat, R., Nanjangud, M., Sathyashankara, S., Ashu, P., Agastya, P.K., Dev, S.: Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites. J. Market. Res. 4, 3653–3661 (2019). https://doi.org/10.1016/j.jmrt.2019.06.003CrossRef

Buse, Ö., Elmas, S., Mustafa, K., Ahmet, M.A.: Comparison of radome sandwich composite structures with finite element method. Mater. Today Proc. 34, 297–303 (2020). https://doi.org/10.1016/j.matpr.2020.03.800CrossRef

Lee, B.-E., Park, E.-T., Kim, J., Kang, B.-S., Song, W.-J.: Analytical evaluation on uniaxial tensile deformation behavior of fiber metal laminate based on SRPP and its experimental confirmation. Compos. Part B Eng. 67, 154–159 (2014). https://doi.org/10.1016/j.compositesb.2014.06.031CrossRef

Caggegi, C., Lanoye, E., Djama, K., Bassil, A., Gabor, A.: Tensile behaviour of a basalt TRM strengthening system: influence of mortar and reinforcing textile ratios. Compos. Part B Eng. 130, 90–102 (2017). https://doi.org/10.1016/j.compositesb.2017.07.027CrossRef

Chevuru, R., Dasari, T., Subba, G.V.: Failure mode analysis for tensile S-glass fabric hexply using strain gauge method. J. Crit. Rev. 12, 2394–5125 (2020). https://doi.org/10.31838/jcr.07.12.199

Choudri, R.V., Soni, S.C., Mathur, A.N.: Tensile fracture strength of Boron (SAE-1042)/Epoxy/Aluminium (6061–t6) laminates. Mater. Today Proc. 4, 3407–3415 (2017). https://doi.org/10.1016/j.matpr.2017.02.229CrossRef

De Baere, I., Van Paepegem, W., Quaresimin, M., Degrieck, J.: On the tension–tension fatigue behaviour of a carbon reinforced thermoplastic part I: limitations of the ASTM D3039/D3479 standard. Polym. Testing 30, 625–632 (2011). https://doi.org/10.1016/j.polymertesting.2011.05.004CrossRef

Al Abadi, H., Thai, H.T., Paton-Cole, V., Patel, V.I.: Elastic properties of 3D printed fibre-reinforced structures. Compos. Struct. 193, 8–18 (2018). https://doi.org/10.1016/j.compstruct.2018.03.051

Faulstich, J.M., de Paiva, S., Rezende, M.C.: Mechanical behavior of Kevlar/basalt reinforced polypropylene compo-sites. Mater. Res. 1, 83–89 (2006). https://doi.org/10.1590/S1516-14392006000100016CrossRef

Sun, J., Daliri, A., Guoxing, L., Ruan, D., Lv, Y.: Tensile failure of fibre-metal-laminates made of titanium and carbonfibre/epoxy laminates. Mater. Des. 183, 108139 (2019). https://doi.org/10.1016/j.matdes.2019.108139CrossRef

Kharghani, N., Guedes, S.C.: Experimental, numerical and analytical study of bending of rectangular composite laminates. Eur. J. Mech. A Solids 72, 155–174 (2018). https://doi.org/10.1016/j.euromechsol.2018.05.007MathSciNetCrossRefMATH

Chen, L., Zheng, K., Fang, Q.: Effect of strain rate on the dynamic tensile behaviour of UHMWPE fibre laminates. Polym. Testing 63, 54–64 (2017). https://doi.org/10.1016/j.polymertesting.2017.07.031CrossRef

Pyl, L., Kalteremidou, K.-A., Van Hemelrijck, D.: Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites. Polym. Testing 71, 318–328 (2018). https://doi.org/10.1016/j.polymertesting.2018.09.022CrossRef

Nurrul, A., Abidin, Z., Hafizi, M.Z., Jailani, M., Hussain, A.K., Mahmud, J.: Experimental-numerical analysis of woven laminates under tension. Mater. Sci. 4, 1392–1320 (2020). https://doi.org/10.5755/j01.ms.26.4.22898CrossRef

Padalu, P.K.V.R., Singh, Y., Das, S.: Ten-sile properties of wire and fibre reinforced cementitious matrix composites for strengthening of masonry. Structures 23, 164–179 (2020). https://doi.org/10.1016/j.istruc.2019.10.006CrossRef

Wang, W., Zhang, X., Chouw, N., Li, Z., Shi, Y.: Strain rate effect on the dynamic tensile behaviour of flax fibre rein-forced polymer. Compos. Struct. 200, 135–143 (2018). https://doi.org/10.1016/j.compstruct.2018.05.109CrossRef

Liang, Y., Wang, H., Xuesen, G.: In-plane shear response of unidirec-tional fiber reinforced and fabric reinforced carbon/epoxy composites. Poly-mer Testing 32, 594–601 (2013). https://doi.org/10.1016/j.polymertesting.2013.01.015CrossRef

Title: Simulation of Tensile Test for Laminate Made of CFRP. Role of Different Parameters that Influence the Failure Mode Type
Authors: Nikolay Turbin
Sergei Kovtunov
Publisher: Springer Nature Singapore
Book: Proceedings of the International Conference on Aerospace System Science and Engineering 2022
Print ISBN: 978-981-9906-50-5

Electronic ISBN: 978-981-9906-51-2

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-981-99-0651-2_5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partner