Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
The International Journal of Advanced Manufacturing Technology
Published in: The International Journal of Advanced Manufacturing Technology 1-4/2019

10-06-2019 | ORIGINAL ARTICLE

Slide burnishing—review and prospects

Authors: J. T. Maximov, G. V. Duncheva, A. P. Anchev, M. D. Ichkova

Published in: The International Journal of Advanced Manufacturing Technology | Issue 1-4/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This review paper is devoted to the slide burnishing (SB) of metal components—state-of-the-art, achievements and perspectives. SB belongs to the group of static methods for mechanical surface treatment used largely in aerospace, automotive and other industries. By means of the plastic deformation of the surface layers, the surface integrity (SI) of the respective component is improved greatly in terms of minimum roughness, micro-hardness and introduced residual compressive stresses. As a result, fatigue crack resistance, crack corrosion resistance, wear resistance and corrosion resistance increase dramatically. The main feature of SB is the sliding friction contact between the deforming element and the surface being treated. Using the differential-morphological method, an integrated classification of the static methods is created and the area of SB is outlined. The proposed morphological matrix, which can be expanded and supplemented contains existing burnishing methods as well as combinations of elements and interactions that can be used to synthesize new burnishing methods and tools. In addition, a literature review of the publications devoted to SB has been conducted. Further, an analysis of the published studies on different criteria has been carried out and graphic visualizations of the statistical results have been made. On this basis, relevant conclusions have been made and the directions for future investigations of SB have been outlined.
previous article Experimental and numerical studies of re-stirring and re-heating effects on mechanical properties in friction stir additive manufacturing
next article Study of the influence of tool rake angle in ductile machining of optical quartz glass

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Griffith АА (1921) Philosophical transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character 221:163–198
2.
El-Axir MH (2002) A method of modeling residual stress distribution in turning for different materials. Int J Mach Tools Manuf 42(9):1055–1063
3.
Sasahara H (2005) The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45%C steel. Int J Mach Tools Manuf 45(2):131–136
4.
Gu Y, Li H, Du B, Ding W (2019) Towards the understanding of creep-feed deep grinding of DD6 nickel-based single-crystal superalloy. Int J Adv Manuf Technol 100(1–4):445–455
5.
Qian N, Ding W, Zhu Y (2018) Comparative investigation on grindability of K4125 and Inconel718 nickel-based superalloys. Int J Adv Manuf Technol 97(5–8):1649–1661
6.
Daia CW, Dinga WF, Zhua YJ, Xua JH, Yu HW (2018) Grinding temperature and power consumption in high speed grinding of Inconel 718 nickel-based superalloy with a vitrified CBN wheel. Precis Eng 52:192–200
7.
Zhou H, Ding W, Liu C (2019) Material removal mechanism of PTMCs in high-speed grinding when considering consecutive action of two abrasive grains. Int J Adv Manuf Technol 100(1–4):153–165
8.
Xia X, Yub T, Ding W, Xu J (2018) Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: tool surface topology effect on grinding force and ground surface quality. Precis Eng 53:134–145
9.
Plaster HJ (1993) A tribute to Benjamin chew Tilghman, in: proceedings of the 5th international conference on shot peening. In: pp 2–9
10.
Scibner IA (1916) Burnishing tool. United States Patent 1171146, Patented Feb. 8, 1916
11.
Ecoroll Catalogue (2006) Tools and solutions for metal surface improvement. Ecoroll Corporation Tool Technology, USA
12.
Klumpp A, Hoffmeister J, Schulze V (2014) Mechanical surface treatments, in: Conf proc 2014: ICSP-12 Goslar, Germany, pp. In: 12–24
13.
Zhuang W, Liu Q, Djugum R, Sharp PK, Paradowska A (2014) Deep surface rolling for fatigue life enhancement of laser clad aircraft aluminium alloy. Appl Surf Sci 320:558–562
14.
Fouad Y, Mhaede M, Wagner L (2010) Effect of mechanical surface treatment on fatigue performance of extruded ZK60 alloy. Fatigue Fract Eng Mater Struct 34:403–407
15.
Prevey PS, Jayaraman N, Ravintranath R (2010) Fatigue life extension of stream turbine alloys using low plasticity burnishing. Proceedings of ASME Turbo Expo 2010: Power for land, sea and air, June 14–18, 2010, Glasgow
16.
Revankar GD, Shetty R, Rao SS, Gaitonde VN (2017) Wear resistance enhancement of titanium alloy (Ti-6Al-4V) by ball burnishing process. J Mater Resear Technol 6(1):13–32
17.
Rajasekariah R, Vaidyanathan S (1975) Increasing the wear-resistance of steel components by ball burnishing. Wear 34(2):183–188
18.
Hassan AM, Al-Dhifi SZS (1999) Improvement in the wear resistance of brass components by the ball burnishing process. J Mater Process Technol 96(1–3):73–80
19.
Kato H, Ueki H, Yamamoto K, Uasunaga K (2018) Wear resistance improvement by nanostructured surface layer produced by burnishing. Mater Sci Forum 917:231–235
20.
Krishna RM, Koorapati EP, Kotaiah R (2011) An investigation into the improvement in wear resistance of roller burnished mild steel specimen. Int J Eng Stud 3(2):141–148
21.
Krishna RM, Koorapati EP (2012) A study of wear resistance of non-ferrous roller burnished components. Int J Appl Manag Sci 3(1):11–24
22.
Rao DS, Hebbar HS, Komaraiah M, Kempaiah UN (2008) Burnishing parameters on surface hardness and wear resistance of HSLA dual-phase steels. Mater Manuf Process 23(3):295–302
23.
Li N, Zhao J, Xia W, Li F (2012) Fretting behaviour of burnished pure copper under oil lubricant. Adv Mater Resear 591(593):1108–1112
24.
Rao DS, Hebbar HS, Komaraiah M, Kempaiah UN (2008) Investigation on the effect of ball burnishing parameters on surface roughness and corrosion resistance of HSLA dual-phase steels. East Afric J Sci 2(2):164–169
25.
Krishna RM, Reddy TVS (2011) Optimization of burnishing process parameters for improved corrosion resistance of aluminium and mild steel. Int J Eng Resear Technol 4(1):55–66MathSciNet
26.
Hull EH, Nerad AJ (1961) Irregular diamond burnishing tool. United States patent 2966722, patented Jan, vol 3, p 1961
27.
Prevey P (1998) Burnishing and apparatus for providing a layer of compressive residual stress in the surface of a workpiece. US Patent 5826453, Patented Oct. 27, 1998
28.
Prevey P (2002) Method and apparatus for providing a residual stress distribution in the surface of a part. US Patent 6415486, Patented Jul. 9, 2002
29.
Prevey P, Jayaraman N, Ravindranath R, Shepard M (2007) Mitigation of fretting fatigue damage in blade and disk pressure faces with LPB, ASME conference proceedings, Vol 5: Turbo Expo, May 14-17, 2007, Montreal Canada, Paper no GT 2007-27424 pp. 61–69
30.
Prevey P, Jayaraman N, Shepard M, Ware R, Cadte J, Ontko N (2008) The use of engineered compressive residual stresses to mitigate stress corrosion cracking and fatique failure in 300M lauding gear steel. Proceeding 10th Joint FAA/DoD/NASA Aging Aircraft Conference, Palm Springs. CA
31.
Hamuiela JAG, Kuznetsov YN, Hamuiela TO (2017) Genetic-morphological synthesis of chucks. Lutsk, Veja-Druk (in Russian)
32.
Bliumberg VA, Glushtenko VF (1982) Which solution is better? Leningrad, lenizdat (in Russian)
33.
Amdouni H, Bouzaiene H, Montagne A, Nasri M, Iost A (2017) Modeling and optimization of a ball-burnishing aluminum alloy flat surface with a crossed strategy based on response surface methodology. Int J Adv Manuf Technol 88(1–4):801–814
34.
Bounouara A, Hamadache H, Amirat A (2018) Investigation on effect of ball burnishing on fracture toughness in spiral APIX70 pipeline steel. Int J Adv Manuf Technol 94(9–12):4543–4551
35.
El-Taweel TA, El-Axir MH (2009) Analysis and optimization of the ball burnishing process through the Taguchi technique. Int J Adv Manuf Technol 41:301–310
36.
Gharbi F, Sghaier S, Al-Fadhalah KJ, Benameur T (2011) Effect of ball burnishing process on the surface quality and microstructure properties of AISI 1010 steel plates. J Mater Eng Perform 20(6):903–910
37.
Nemat M, Lyons AC (2000) An investigation of the surface topography of ball burnished mild steel and aluminium. Int J Adv Manuf Technol 16:469–473
38.
Sarhan AAD, El-Tayeb (2014) NSM investigating the surface quality of the burnished brass C3605-fuzzy rule-based approach. Int J Adv Manuf Technol 71:1143–1150
39.
Travieso-Rodriges JA, Gomez-Gras G, Dessein G, Carrillo F, Alexis J, Jorba-Piero J, Aubazac N (2015) Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens. Int J Adv Manuf Technol 81:1757–1765
40.
Hassan AM (1997) The effects of ball- and roller-burnishing on the surface roughness and hardness of some non-ferrous metals. J Mater Process Technol 72:385–391
41.
Maximov JT, Duncheva GV, Amudjev IM, Krumov KK, Kuzmanov TV (2010) A new single-roller burnishing technique decreasing roughness obtained. J Mater Sci Eng Adv Technol 2(2):177–202
42.
Okada M, Suenobu S, Watanabe K, Yamashita Y, Asakawa N (2015) Development and burnishing characteristics of roller burnishing method with rolling and sliding effects. Mechatronics 29:110–115
43.
Yatzenko VK, Zaitzev GZ, Pritchenko VF, Ivshtenko LI (1985) Enhancement of load-carrying capacity of machine components by diamond burnishing. Machinostroenie, Moscow in Russian
44.
Korzynsky M (2013) Slide diamond burnishing. In: Korzynski M (ed) Nonconventional finishing technologies. Polish Scientific Publishers, Warsaw, pp 9–33
45.
Konefal K, Korzynski M, Byczkowska Z, Korzynska K (2013) Improved corrosion resistance of stainless steel X6CrNiMoTi17-12-2 by slide diamond burnishing. J Mater Process Technol 213:1997–2004
46.
Korzynski M, Dudek K, Kruczek B, Kocurek P (2018) Equilibrium surface texture of valve stems and burnishing method to obtain it. Tribol Int 124:195–199
47.
Korzynski M, Dudek K, Palczak A, Kruczek B, Kocurek P (2018) Experimental models and correlations between surface parameters after slide diamond burnishing. Meas Sci Rev 18(3):123–129
48.
Korzynski M, Lubas J, Swirad S, Dudek K (2011) Surface layer characteristics due to slide diamond burnishing with a cylindrical ended tool. J Mater Process Technol 211:84–94
49.
Korzynski M, Pacana A, Cwanek J (2009) Fatigue strength of chromium coated elements and possibility of its improvement with slide diamond burnishing. Surf Coat Technol 203:1670–1676
50.
Korzynski M, Zarski T (2016) Slide diamond burnishing influence on surface stereometric structure of AZ91 alloy. Surf Coat Technol 307:590–595
51.
Korzynski M (2009) A model of smoothing slide ball-burnishing and an analysis of the parameter interection. J Mater Process Technol 209(1):625–633
52.
Korzynski M (2007) Modeling and experimental validation of force – surface roughness relation for smoothing burnishing with a spherical tool. Int J Mach Tools Manuf 47(12):1956–1964
53.
Korzynski M (2009) Relief making on bearing sleeve surface by eccentric burnishing. J Mater Process Technol 209:131–138
54.
Tobola D, Brostow W, Czechowski K, Rusek P, Wronska (2015) Structure and properties of burnished and nitrided AISI D2 tool steel. Mater Sci 21(4):511–516
55.
Tobola D, Brostow W, Czechowski K, Rusek P (2017) Improvement of wear resistance of some cold working tool steels. Wear 382-383:29–39
56.
Tobola D, Kania B (2018) Phase composition and stress state in the surface layers of burnished and gas nitrided Sverker 21 and Vanadis 6 tool steels. Surf Coat Technol 353:105–115
57.
Tobola D, Rusek P, Czechowski K, Miller T, Duda K (2015) New indicators of burnished surface evaluation – reasons of application. Metrol Meas Syst 22(2):263–274
58.
Kuznetsov VP, Tarasov SY, Dmitriev AI (2015) Nanostructuring burnishing and subsurface shear instability. J Mater Process Technol 217:327–335
59.
Boguslaev VA, Yatsenko VK, Yakovlev VG, Stepanova LP, Pukhalskaya GV (2008) The effect of diamond burnishing on structure and properties of detonation-gas coatings on gas-turbine engine parts. Metal Sci Heat Treatm 50(1–2):44–48
60.
Huuki J, Laakso SVA (2013) Integrity of surface finished with ultrasonic burnishing. Proc IMechE Part B: J Eng Manuf 227(1):45–53
61.
Huuki J, Laakso SVA (2017) Surface improvement of shafts by the diamond burnishing and ultrasonic burnishing techniques. Int J Mach Machinabil Mater 19(3):246–258
62.
Liska J, Liska K, Kodacsy J (2014) Hard cutting and diamond burnishing of 100Cr6 steel bearings. Key Eng Mater 581:169–175
63.
Liska K, Kodacsy J, Liska J (2013) Investigation of microgeometry on diamond burnished surfaces. In: 8th research/expert conference with international participations “quality 2013”, Neum, June 06–08, 2013, pp, pp 615–620
64.
Luo H, Liu J, Wang L, Zhong Q (2006) Study of the mechanism of the burnishing process with cylindrical polycrystalline diamond tools. J Mater Process Technol 180(1–3):9–16
65.
Luo H, Liu J, Wang L, Zhong Q (2006) The effect of burnishing parameters on burnishing force and surface microhardness. Int J Adv Manuf Technol 28(7–8):707–713
66.
Luo H, Liu J, Zhong Q (2005) Investigation of the burnishing process with PCD tool on non-ferrous metals. Int J Adv Manuf Technol 25(5–6):454–459
67.
Luo H, Wang L, Zhang C (2001) Study on the aluminum alloy burnishing processing and the existence of the outstripping phenomenon. J Mater Process Technol 116(1):88–90
68.
Sachin B, Narendranath S, Chakradhar D (2018) Effect of cryogenic diamond burnishing on residual stress and microhardness of 17 – 4 PH stainless steel. Mater Today 5(9) Part 3):18393–18399
69.
Sachin B, Narendranath S, Chakradhar D (2018) Experimental evaluation of diamond burnishing for sustainable manufacturing. Mater Res Express 5(10):106514
70.
Sachin B, Narendranath S, Chakradhar D (2019) Sustainable diamond burnishing of 17-4 PH stainless steel for enhanced surface integrity and product performance by using a novel modified tool. Mater Res Express 6:046501
71.
72.
Maximov JT, Duncheva GV (2012) Finite element analysis and optimization of spherical motion burnishing of low-alloy steel. Proc. IMechE, Part C: J Mech Eng Sci 226(1):161–176
73.
Maximov JT, Duncheva GV, Amudjev IM, Kuzmanov TV (2012) Modelling the power parameters of the spherical motion burnishing. Proc IMechE, Part C: J Mech Eng Sci 226(2):498–510
74.
Maximov JT, Anchev AP, Duncheva GV, Ganev N, Selimov KF (2017) Influence of the process parameters on the surface roughness, micro-hardness, and residual stresses in slide burnishing of high-strength aluminum alloys. J Braz Soc Mech Sci Eng 39(8):3067–3078
75.
Maximov JT, Duncheva GV, Anchev AP, Amudjev IM, Kuzmanov VT (2014) Enhancement of fatigue life of rail-end-bolt holes by slide diamond burnishing. Eng Solid Mech 2(4):247–264
76.
Maximov JT, Anchev AP, Dunchev VP, Ganev N, Duncheva GV, Selimov KF (2017) Effect of slide burnishing basic parameters on fatigue performance of 2024-T3 high-strength aluminium alloy. Fatigue Fract Eng Mater Struct 40(11):1893–1904
77.
Maximov JT, Anchev AP, Duncheva GV, Ganev N, Selimov KF, Dunchev VP (2019) Impact of slide diamond burnishing additional parameters on fatigue behaviour of 2024-T3 Al alloy. Fatigue Fract Eng Mater Struct 42(1):363–373
78.
Maximov JT, Anchev AP, Duncheva GV (2015) Modeling of the friction in tool-workpiece system in diamond burnishing process. Coupled Syst Mech 4(4):279–295
79.
Maximov JT, Kuzmanov TV, Duncheva GV, Ganev N (2009) Spherical motion burnishing implemented on lathes. Int J Mach Tools Manuf 49:824–831
80.
81.
Maximov JT (2013) Spherical motion burnishing. In: Korzynski M (ed) Nonconventional finishing technologies. Polish Scientific Publishers, Warsaw, pp 35–59
82.
83.
Maximov JT, Duncheva GV, Anchev AP, Ganev N, Dunchev VP (2019) Effect of cyclic loading on fatigue performance of slide burnishing components made of low-alloy medium carbon steel. Fatigue Fract Eng Mater Struct 42:1414–1425. https://​doi.​org/​10.​1111/​ffe.​13001
84.
Aliev KT, Aslanov TI (1979) The influence of diamond burnishing on the fatigue strength and wear resistance of the shafts of petroleum chains. Chem Pet Eng 15(6):459–461
85.
Bednarski P, Bialo D, Brostow W, Czechowski K, Polowski W, Rusek P, Tobola D (2013) Improvement of tribological properties of matrix composites by means of slide burnishing. Mater Sci 19(4):367–372
86.
Iwamoto T, Tanaka H, Yanagi K (2011) An experimental study on diamond burnishing tool Wear and its lifetime estimation. In: Proceedings of the international conference on Technology of Plasticity ICTP’2011, Aachen, 2011, pp 82–86
87.
Lin YC, Wang SW, Lai HY (2004) The relationship between surface roughness and burnishing factor in the burnishing process. Int J Adv Manuf Technol 23(9–10):666–671
88.
Labanowski J, Ossowska A (2006) Influence of burnishing on stress corrosion cracking susceptibility of duplex steel. J Achiev Mater Manuf Eng 19(1):46–52
89.
Nestler A, Schubert A (2015) Effect of machining parameters on surface properties in slide diamond burnishing of aluminium matrix composites. Materials Today: Proceedings 2S:S156–S161
90.
Okada M, Shinya M, Matsubara H, Kozuka H, Tachiya H, Asakawa N, Otsu M (2017) Development and characterization of diamond tip burnishing with a rotary tool. J Mater Process Technol 244:106–115
91.
Okada M, Terada S, Miura T, Iwai Y, Takazawa T, Kataoka Y, Kihara T, Otsu M (2018) Fundamental burnishing characteristics of Ni-based alloy using coated carbide tool. Proc Manuf 15:1278–1283
92.
Pa PS (2010) Continuous finishing processes using a combination of burnishing and electrochemical finishing on bore surface. Int J Adv Manuf Technol 49:147–154
93.
Pang C, Luo H, Zhang Z, Ma Y (2018) Precipitation behavior and grain refinement of burnishing Al-Zn-mg alloy. Progress Nat Sci Mater Int 28:54–59
94.
Radziejewska J, Skrzypek S (2009) Microstructure and residual stresses in surface layer of simultaneously laser alloyed and burnished steel. J Mater Process Technol 209:2047–2056
95.
Saldana-Robles A, Plascencia-Mora H, Aguilera-Gomez E, Saldana-Robles A, Marquez-Herrera A, Diosdado-De la Pena JA (2018) Influnce of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel. Surf Coat Technol 339:191–198
96.
Shiou FJ, Banh QN (2016) Development of an innovative small ball-burnishing tool embedded with a load cell. Int J Adv Manuf Technol 87(1–4):31–41
97.
Shiou FJ, Chen CH (2003) Determination of optimal ball-burnishing parameters for plastic injection moulding steel. Int J Adv Manuf Technol 21(3):177–185
98.
Shiou FJ, Huang SJ, Shin AJ, Zhu J, Yoshino M (2017) Fine surface finish of a hardened stainless steel using a new burnishing tool. Procedia Manuf 10:208–217
99.
Shvetsov AN, Skuratov DL (2017) Evolution of the residual stresses formation from FeC0.15Cr12Ni2 steel in the part surface during the diamond smoothing. Procedia Eng 176:355–362
100.
Shvetsov AN, Skuratov DL (2017) Surface microgeometry of structural-steel samples after diamond burnishing. Russ Eng Res 37(6):536–538
101.
Swirad S (2007) The effect of burnishing parameters on steel fatigue strength. Nonconventional Technol Rev 1:113–118
102.
Swirad S (2011) The surface texture analysis after slide burnishing with cylindrical elements. Wear 271:576–581
103.
Szutkowska M, Tobola D, Czechowski K (2015) Burnishing of aluminium alloy surface using diamond matrix composite tools. Key Eng Mater 641:39–46
104.
Tanaka H, Ishii W, Yanagi K (2011) Optimal burnishing conditions and mechanical properties of surface layer by surface modification effect induced of applying burnishing process to stainless steel and aluminum alloy. J Jpn Soc Technol Plast 52(605):726–730 in Japanese
105.
Tanaka H, Nishinaka K, Yanagi K (2012) Development of hydraulic burnishing tool for discontinuous surface finishing – machining characteristics of hydrostatic burnishing tool with single crystal diamond tip. J Jpn Soc Technol Plast 53(621):924–928 in Japanese
106.
Tanaka H, Tabuto H, Yanagi K, Futamura M (2009) Effect of surface hardened steel texture of preliminary process on burnishing process – a metrological study of hardened steel surface finishing using diamond burnishing tool. J Jpn Soc Technol Plast 50(581):555–559 in Japanese
107.
Teimouri R, Amini S, Bami AB (2018) Evaluation of optimized surface properties and residual stress in ultrasonic assisted ball burnishing of AA6061-T6. Measurement 116:129–139
108.
109.
Yu X, Wang L (1999) Effect of various parameters on the surface roughness of an aluminium alloy burnished with a spherical surfaced polycrystalline diamond tool. Int J Mach Tools Manuf 39(3):459–469MathSciNet
110.
Brostow W, Czechowski K, Polowski W, Rusek P, Tobola D, Wronska I (2013) Slide diamond burnishing of tool steels with adhesive coatings and diffusion layers. Mater Res Innov 17(4):269–277
111.
Brostow W, Lohse S, Osmanson A, Tobola D (2018) Mechanical finishing and ion beams application to cold working tool steels: consequences for scratch resistance. Mater Res Soc Commun 8(1):178–182
112.
Buldum BB, Cagan SC (2018) Study of ball burnishing process on the surface roughness and microhardness of AZ91D alloy. Exp Tech 42(2):233–241
113.
Czechowski K, Tobola D (2017) Slide finishing burnishing of metal alloys and metal matrix composites. Mechanik NR (7):1–3
114.
Esme U (2010) Use of grey based Taguchi method in ball burnishing process for the optimization of surface burnishing and microhardness of AA7075 aluminium alloy. Mater Technol 44:129–135
115.
Gharbi F, Sghaier S, Hamdi H, Benameur T (2012) Ductility improvement of aluminum 1050A rolled sheet by a newly designed ball burnishing tool device. Int J Adv Manuf Technol 60(1–4):87–99
116.
Hamadache H, Laouar L, Zeghib NE, Chaoui K (2006) Characteristics of Rb40 steel superficial layer under ball and roller burnishing. J Mater Process Technol 180(1–3):130–136
117.
Hamadache H, Zemouri Z, Laouar L, Dominiak S (2014) Improvement of surface conditions of 36CrNiMo6 steel by ball burnishing process. J Mech Sci Technol 28(4):1491–1498
118.
Hankare AV, Sapkal AA, Dounde AA (2017) Effect of diamond burnishing process on surface roughness of AISI 4140 alloy steel. J Adv Sci Technol 13(1):405–410
119.
He D, Wang B, Zhang J, liao S, Deng WJ (2018) Investigation of interference effect on the burnishing process. Int J Adv Manuf Technol 95:1–10
120.
Maximov JT, Duncheva GV, Anchev AP (2017) Fatigue Life Increase of 2024-T3 Aluminium Alloy by Slide Burnishing. LAP Lambert Academic Publishing, Saarbrucken
121.
Babic M, Kocovic V, Vukelic D, Mihajlovic G, Eric M, Tadic B (2017) Investigation of ball burnishing processing on mechanical characteristics of wooden elements. Proc IMechE Part C: J Mech Eng Sci 231(1):120–127
Metadata
Title
Slide burnishing—review and prospects
Authors
J. T. Maximov
G. V. Duncheva
A. P. Anchev
M. D. Ichkova
Publication date
10-06-2019
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 1-4/2019
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-019-03881-1

Other articles of this Issue 1-4/2019

The International Journal of Advanced Manufacturing Technology 1-4/2019 Go to the issue

ORIGINAL ARTICLE

Implementation of weave patterns by path parameterization in the simulation of welding processes by the finite element method

ORIGINAL ARTICLE

Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V

ORIGINAL ARTICLE

Determining kinetic energy distribution of the working medium in a centrifugal disc finishing process—part 2: experimental analysis with the use of acoustic emission signal

ORIGINAL ARTICLE

On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel

ORIGINAL ARTICLE

Designing sintering time for a TiSiC compound: a microwave and conventional comparison

ORIGINAL ARTICLE

Tribological performance of nanographite-based metalworking fluid and parametric investigation using artificial neural network

Premium Partners

    Image Credits