Top

Published in:

2021 | OriginalPaper | Chapter

Some Investigations into 1,000 MPa Pure Waterjet Cutting

Authors : Andrzej Perec, Franz Trieb, Frank Pude

Published in: Advances in Water Jetting

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper documents the application of the maximum available pressure for cutting operations using a special pump. This increase of the water pressure, and its conversion to an ultra-high-speed waterjet results in deeper and/or faster cutting. Theoretical aspects of using these ultra-high-speed waterjets are presented. The behavior of this waterjet when it hits the target material is shown. The thermal properties of the waterjet were analyzed. Research into the influence of selected pressure levels on the quality of the cutting edge of processed carbon fiber composite, and into the wear on the water nozzle subjected to ultra-high pressure (UHP) is presented.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Multi-criteria Optimization of the Abrasive Waterjet Cutting Process for the High-Strength and Wear-Resistant Steel Hardox®500

next chapter Effect of Standoff Distance on the Erosion of Various Materials

Jenaoptik: Information materials about Jenaoptik IR-TCM HD 1024 Series Ther-mographic Infrared Cameras

Koerner, P., et al.: Design of reliable pressure intensifiers for water-jet cutting at 4 to 7 kbar. In: 16th International Conference on Jetting Technology, Aix en Provence, France (2002)

Kotchan, M., Trieb, F.: 800 MPa ultra high pressure for jetting applications. In: 15-th International Conference on Jetting Technology, Ronneby, Sweden (2000)

Louis, H., et al.: A thermographical map of the tool and workpiece during the cut-ting process by plain waterjet and abrasive waterjet up to 900 MPa. In: Water Jet-ting, 17th International Conference, Advances and Future Needs (2004)

Louis, H., Mohamed, M., Pude, F.: Cutting mechanism and cutting efficiency for water pressures above 600 MPA. In: WJTA American Waterjet Conference. Houston, Texas, USA, p. Paper 1–A (2003)

Perec, A.: Experimental research into alternative abrasive material for the abrasive water-jet cutting of titanium. Int. J. Adv. Manuf. Technol. 97(1–4), 1529–1540 (2018). https://doi.org/10.1007/s00170-018-1957-2CrossRef

Perec, A.: Investigation of limestone cutting efficiency by the abrasive water suspension jet. In: Hloch, S., et al. (eds.) Advances in Manufacturing Engineering and Materials, pp. 124–134. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-99353-9_14

Perec, A.: Possibilities of materials machining with an abrasive waterjet under 1000 MPa pressure. In: Ruszaj, A. (ed.) The 3-rd International Conference on Machining and Measurements of Sculptured Surface, Kraków, Poland, pp. 435–444 (2003)

Perec, A., Radomska-Zalas, A.: Modeling of abrasive water suspension jet cutting process using response surface method. In: AIP Conference Proceedings, vol. 2078, pp. 0200511–0200518 (2019). https://doi.org/10.1063/1.5092054

10.

Quick-Ohm: Sapphire Nozzles, Ultra High Pressure Nozzles, Long Life Nozzles. https://www.quick-keramik-shop.de/en/sapphire-waterjet-nozzles/. Accessed 01 Jan 2020

11.

Sitek, L., et al.: Erosion capability of ultra-high-speed continuous waterjet and pulsating waterjet: the comparison. In: Water Jet 2017 – Research, Development, Applications. Ústav geoniky AV ČR, v. v. i. Ostrava 2017, Lednice, (2017)

12.

Susuzlu, T., et al.: Initial research on the ultra-high pressure waterjet up to 700 MPa. J. Mater. Process. Technol. 149, 30–36 (2004)CrossRef

13.

Trieb, F., Zamazal, K.: 800 MPa pure waterjet and abrasive waterjet cutting–what’s next. In: American Waterjet Conference, Minneapolis, Minnesota, USA, p. Paper 61 (2001)

14.

Trieb, F., Zamazal, K.: Waterjet cutting - 300 MPa high pressure to 800 MPa ultra high pressure. In: 6th Pacific Rim International Conference on Water Jetting Technology, Sydney, Australia, pp. 186–192 (2000)

15.

VisionResearch: Phantom Camera v12.1 Data Sheet. http://www.adept.net.au/cameras/visionresearch/pdf/PhantomV121.pdf. Accessed 01 Jan 2020

16.

Werth, H., et al.: Cutting performance and obtainable quality when applying 6000-bar abrasive water-jets. Strojniski Vestn.-J. Mech. Eng. 52(7–8), 463–469 (2006)

Title: Some Investigations into 1,000 MPa Pure Waterjet Cutting
Authors: Andrzej Perec
Franz Trieb
Frank Pude
Publisher: Springer International Publishing
Book: Advances in Water Jetting
Print ISBN: 978-3-030-53490-5

Electronic ISBN: 978-3-030-53491-2

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-3-030-53491-2_17

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners