Top

International Journal of Mechanics and Materials in Design

Published in:

02-01-2019

Stability analysis of a capacitive micro-resonator with embedded pre-strained SMA wires

Authors: Moahmmad Fathalilou, Ghader Rezazadeh, Aynaz Mohammadian

Published in: International Journal of Mechanics and Materials in Design | Issue 4/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper presents a study on the effects of the SMA wires’ characteristics on tuning the stability of a capacitive micro-resonator. In the proposed model, pre-strained SMA wires have been embedded in a double clamped resonant microbeam which is actuated electrostatically. The governing equations of the system have been introduced and then an eigen-value problem has been adopted to investigate stability. Galerkin-based numerical methods have been used to solve the governing equation of motion for obtaining the motion trajectories of the beam. The effects of the number of SMA wires, their diameter, pre-strain and temperature on the pull-in instability and frequency response of the resonator have been shown. Critical values of recovery stress and SMA temperature for avoiding instability, with and without applying DC voltage have been obtained. The results have shown that by changing each of the SMA parameters, one can reach a needed magnitude of recovery stress as well as transmitted longitudinal force to the host beam, and consequently control and tune the stability and resonance frequency of the micro-resonator.

previous article Novel method for analyzing the behavior of composite beams with non-smooth interfaces

next article Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Abbasnejad, B., Rezazadeh, G.: Mechanical behavior of a FGM micro-beam subjected to a nonlinear electrostatic pressure. Int. J. Mech. Mater. Des. 8, 381–392 (2012)

Asadi, H., Bodaghi, M., Shakeri, M., Aghdam, M.M.: An analytical approach for nonlinear vibration and thermal stability of shape memory alloy hybrid laminated composite beams. Eur. J. Mech. A/Solids 42, 454–468 (2013)

Asadi, H., Kiani, Y., Shakeri, M., Eslami, M.R.: Exact solution for nonlinear thermal stability of hybrid laminated composite Timoshenko beams reinforced with SMA fibers. Compos. Struct. 108, 811–822 (2014a)

Asadi, H., Eynbeygi, M., Wang, Q.: Nonlinear thermal stability of geometrically imperfect shape memory alloy hybrid laminated composite plates. Smart Mater. Struct. 23, 1–13 (2014b)

Asadi, H., Bodaghi, M., Shakeri, M., Aghdam, M.M.: Nonlinear dynamics of SMA-fiber-reinforced composite beams subjected to a primary/secondary-resonance excitation. Acta Mech. 226(2), 437–455 (2015)MathSciNetMATH

Azizi, S., Rezazadeh, G., Ghazavi, M.R., Khadem, S.E.: Stabilizing the pull-in instability of an electro-statically actuated micro-beam using piezoelectric actuation. Appl. Math. Model. 35(10), 4796–4815 (2011)MATH

Azizi, S., Ghazavi, M.R., Khadem, S.E., Rezazadeh, G., Cetinkaya, C.: Application of piezoelectric actuation to regularize the chaotic response of an electrostatically actuated micro-beam. Nonlinear Dyn. 73(1–2), 853–867 (2013)MathSciNetMATH

Azizi, S., Ghazavi, M.R., Rezazadeh, G., Ahmadian, I., Cetinkaya, C.: Tuning the primary resonances of a micro resonator, using piezoelectric actuation. Nonlinear Dyn. 76(1), 839–852 (2014)MATH

Birman, V.: Theory and comparison of the effect of composite and shape memory alloy stiffeners on stability of composite shells and plates. Int. J. Mech. Sci. 39, 1139–1149 (1997)MATH

Brinson, L.C.: One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variable. J. Intell. Mater. Syst. Struct. 4(2), 229–242 (1993)

Brinson, L.C., Huang, M.S., Boller, C., Brand, W.: Analysis of controlled beam deflections using SMA wires. J. Intell. Mater. Syst. Struct. 8, 12–25 (1997)

Cosserat, E., Cosserat, F., Theorie des Corps Deformables, Paris, Librairie Scientifique A. Hermann et. Fils (1909)

Dos Reis, R.P.B., Souto, C.R., Araújo, C.J., De Araujo, C.J., Silva, A.A., Da Silva, E.P.: Vibration attenuation in an epoxy smart composite beam with embedded Ni–Ti shape memory wires. Mater. Sci. Forum 643, 7–13 (2010)

Eringen, A.C.: Linear theory of micropolar elasticity. J. Appl. Math. Mech 15, 909–924 (1966)MathSciNetMATH

Fathalilou, M., Sadeghi, M., Rezazadeh, G.: Nonlinear behavior of capacitive micro-beams based on strain gradient theory. J. Mech. Sci. Technol. 28, 1141–1151 (2014a)

Fathalilou, M., Sadeghi, M., Rezazadeh, G.: Gap dependent bifurcation behavior of a nano-beam subjected to a nonlinear electrostatic pressure. Lat. Am. J. Solids. Struct. 11(13), 2426–2443 (2014b)

Fathalilou, M., Sadeghi, M., Rezazadeh, G.: Micro-inertia effects on the dynamic characteristics of micro-beams considering the couple stress theory. Mech. Res. Commun. 60, 74–80 (2014c)

Ghazavi, M.R., Rezazadeh, G., Azizi, S.: Pure parametric excitation of a micro cantilever beam actuated by piezoelectric layers. Appl. Math. Model. 34(12), 4196–4207 (2010)MathSciNetMATH

Guo, J.G., Zhao, Y.P.: Dynamic stability of electrostatic torsional actuators with van der Waals effect. Int. J. Solids Struct. 43, 675–685 (2006)MATH

Jani, J.M., Leary, M., Subic, A., Gibson, M.: A review of shape memory alloy research, applications and opportunities. Mater. Des. 56, 1078–1113 (2014)

Krylov, S.: Lyapunov exponents as a criterion for the dynamic pull-in instability of electrostatically actuated microstructures. Int. J. Non Linear Mech. 42, 626–642 (2007)

Kuo, S.Y., Shiau, L.C., Chen, K.H.: Buckling analysis of shape memory reinforced composite laminates. Compos. Struct. 90, 188–195 (2009)

Kuznetsov, Y.A.: Elements of Applied Bifurcation Theory, 2nd edn. Springer, New York (1997)

Lam, D., Yang, F., Chong, A.: Experiments and theory in strain gradient elasticity. J. Mech. Phys. Solids 51(8), 1477–1508 (2003)MATH

Lau, K.T.: Vibration characteristics of SMA composite beams with different boundary conditions. Mater. Des. 23, 741–749 (2002)

Lee, W.J., Weber, B., Feltrin, G., Czaderski, C., Motavalli, M., Leinenbach, C.: Stress recovery behavior of an Fe–Mn–Si–Cr–Ni–VC shape memory alloy used for prestressing. Smart Mater. Struct. (2013). https://doi.org/10.1088/0964-1726/22/12/125037 CrossRef

Lin, W.H., Zhao, Y.P.: Dynamics behavior of nanoscale electrostatic actuators. Chin. Phys. Lett. 20(11), 2070–2073 (2003)

Malekzadeh, K., Mozafari, A., Ashenai Ghasemi, F.: Free vibration response of a multilayer smart hybrid composite plate with embedded SMA wires. Lat. Am. J. Solids. Stru. 11, 279–298 (2014)

Mindlin, R.D., Tiersten, H.F.: Effects of couple-stresses in linear elasticity. Arc. Ration. Mech. Anal. 11, 415–448 (1962)MathSciNetMATH

Nix, W., Gao, H.: Indentation size effects in crystalline materials: a low for strain gradient plasticity. J. Mech. Phys. Solids 46( 3), 411–425 (1998)MATH

Ostachowicz, W., Krawczuk, M., Zak, A.: Natural frequencies of multi-layer composite plate with embedded shape memory alloy wires. J. Intell. Mater. Syst. Struct. 9(3), 232–237 (1998)MATH

Ostachowicz, W., Krawczuk, M., Zak, A.: Natural frequencies of a multilayer composite plate with shape memory alloy wires. Finite Elem. Anal. Design. 32(2), 71–83 (1999)MATH

Osterberg, P.M., Senturia, S.D.: M-TEST: a test chip for MEMS material property measurement using electrostatically actuated test structures. J. Microelectromech. S. 6, 107–118 (1997)

Park, J.S., Kim, J.H., Moon, S.H.: Vibration of thermally post-buckeld composite plates embedded with shape memory alloy fibers. Compos. Struct. 63, 179–188 (2004)

Rezazadeh, G., Fathalilou, M., Shabani, R.: Static and dynamic stabilities of a microbeam actuated by a piezoelectric voltage. Microsyst. Technol. 15, 1785–1791 (2009)

Rezazadeh, G., Fathalilou, M., Sadeghi, M.: Pull-in voltage of electrostatically-actuated microbeams in terms of lumped model pull-in voltage using novel design corrective coefficients. Sens. Imaging: Int. J. 12, 117–131 (2011)

Senturia, S.: Microsystem Design. Kluwer, Norwell (2001)

Sohn, J.W., Han, Y.M., Choi, S.B., Lee, Y.S., Han, M.S.: Vibration and position tracking control of a flexible beam using SMA wire actuators. J. Vib. Control 15, 263–281 (2009)MathSciNet

Toupin, R.: Elastic materials with couple stresses. Arch. Ration. Mech. Anal. 11, 385–414 (1962)MathSciNetMATH

Voigt, W.: Theoritiscke studien uber die elastizitats verhaltnisse der krystalle. Abhandlungen der Braunschweigischen Wissenschaftlichen Gesellschaft 34, 3–51 (1887)

Voyiadjis, G., Abu Al-Rub, R.: Gradient plasticity theory with a variable length-scale parameter. Int. J. Solids Struct. 42, 3998–4029 (2005)MATH

Zainal, M.A., Sahlan, S., Ali, M.S.M.: Micromachined shape-memory-alloy microactuators and their application in biomedical devices. Micromachines 6(7), 879–901 (2015)

Zhang, R., Ni, Q.Q., Masuda, A., Yamamura, T.: Vibration characteristics of laminated composite plates with embedded shape memory alloys. Compos. Struct. 74(4), 389–398 (2006)

Title: Stability analysis of a capacitive micro-resonator with embedded pre-strained SMA wires
Authors: Moahmmad Fathalilou
Ghader Rezazadeh
Aynaz Mohammadian
Publication date: 02-01-2019
Publisher: Springer Netherlands
Published in: International Journal of Mechanics and Materials in Design / Issue 4/2019
Print ISSN: 1569-1713
Electronic ISSN: 1573-8841
DOI: https://doi.org/10.1007/s10999-018-09437-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2019

Intelligent tribological surfaces: from concept to realization using additive manufacturing

Influence of interfacial bonding conditions on the anti-penetration performance of ceramic/metal composite targets

Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements

Geometrically nonlinear bending of functionally graded nanocomposite trapezoidal plates reinforced with graphene platelets (GPLs)

A parametric study on thermo-mechanical vibration of axially functionally graded material pipe conveying fluid

Dispersion of Love waves in size-dependent substrate containing finite piezoelectric and viscoelastic layers

Premium Partners