Skip to main content
Top
Published in: The International Journal of Advanced Manufacturing Technology 2/2024

02-12-2023 | ORIGINAL ARTICLE

State of the art of research studies on machining processes by French research network Manufacturing’21

Author: Vincent Wagner

Published in: The International Journal of Advanced Manufacturing Technology | Issue 2/2024

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

For 20 years now, the French machining activities have been federated around the Manufacturing’21 group. The activities of this group cover all the issues related to mechanical manufacturing of machines, robots, tool path, and analysis of the cutting process.. This review article is interested in this last part: the analysis of the cutting process. The article tries to make a review of the machining activities made during the past years by focusing on several points. The first one is the behaviour of materials by addressing the cutting process in the primary zone, the tribology in machining and the surface integrity. Secondly, this article reviews the work on tool wear analysis. This section begins with the work that explains wear phenomena. This is followed by work on tool wear, and finally by models. This article ends with a part in which the cutting assistance is discussed where the laser assistance, the high pressure and the cryogenic assistance are exposed.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Abdel-Aal HA, Nouari M, El Mansori M (2009) Influence of thermal conductivity on wear when machining titanium alloys. Tribol Int 42:359–372CrossRef Abdel-Aal HA, Nouari M, El Mansori M (2009) Influence of thermal conductivity on wear when machining titanium alloys. Tribol Int 42:359–372CrossRef
4.
go back to reference Abdelali HB, Courbon C, Rech J, Ben Salem W, Dogui A, Kapsa P (2011) Identification of a friction model at the tool-chip-workpiece interface in dry machining of a AISI 1045 steel with a TiN coated carbide tool. J Tribol 133. https://doi.org/10.1115/1.4004879 Abdelali HB, Courbon C, Rech J, Ben Salem W, Dogui A, Kapsa P (2011) Identification of a friction model at the tool-chip-workpiece interface in dry machining of a AISI 1045 steel with a TiN coated carbide tool. J Tribol 133. https://​doi.​org/​10.​1115/​1.​4004879
6.
go back to reference Abroug F, Pessard E, Germain G, Morel F (2018) HCF of AA7050 alloy containing surface defects: study of the statistical size effect. Int J Fatigue 110:81–94CrossRef Abroug F, Pessard E, Germain G, Morel F (2018) HCF of AA7050 alloy containing surface defects: study of the statistical size effect. Int J Fatigue 110:81–94CrossRef
15.
go back to reference Ayed Y, Germain G, Ammar A, Furet B (2013) Degradation modes and tool wear mechanisms in finish and rough machining of Ti17 titanium alloy under high-pressure water jet assistance. Wear 305:228–237CrossRef Ayed Y, Germain G, Ammar A, Furet B (2013) Degradation modes and tool wear mechanisms in finish and rough machining of Ti17 titanium alloy under high-pressure water jet assistance. Wear 305:228–237CrossRef
16.
go back to reference Ayed Y, Germain G, Melsio AP, Kowalewski P (2016) Effect of supply conditions of liquid nitrogen on the cryogenic assisted machining of the Ti64 titanium alloy. In: HSM-High Speed Machining Conference, Metz France Ayed Y, Germain G, Melsio AP, Kowalewski P (2016) Effect of supply conditions of liquid nitrogen on the cryogenic assisted machining of the Ti64 titanium alloy. In: HSM-High Speed Machining Conference, Metz France
19.
go back to reference Baili M, Wagner V, Dessein G, Sallaberry J, Lallement D (2011) An experimental investigation of hot machining with induction to improve Ti-5553 machinability. Trans Tech Publications Ltd, Presented at the Applied mechanics and Materials, pp 67–76 Baili M, Wagner V, Dessein G, Sallaberry J, Lallement D (2011) An experimental investigation of hot machining with induction to improve Ti-5553 machinability. Trans Tech Publications Ltd, Presented at the Applied mechanics and Materials, pp 67–76
24.
go back to reference Battaglia J, Puigsegur L, Cahuc O (2005) Estimated temperature on a machined surface using an inverse approach. Exp Heat Transf 18:13–32ADSCrossRef Battaglia J, Puigsegur L, Cahuc O (2005) Estimated temperature on a machined surface using an inverse approach. Exp Heat Transf 18:13–32ADSCrossRef
25.
go back to reference Bensouilah H, Aouici H, Meddour I, Yallese MA, Mabrouki T, Girardin F (2016) Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement 82:1–18ADSCrossRef Bensouilah H, Aouici H, Meddour I, Yallese MA, Mabrouki T, Girardin F (2016) Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement 82:1–18ADSCrossRef
28.
go back to reference Blanchet F (2015) Etude de la coupe en perçage par le biais d’essais élémentaires en coupe orthogonale : application aux composites carbone-époxy, PhD Thesis, Toulouse Blanchet F (2015) Etude de la coupe en perçage par le biais d’essais élémentaires en coupe orthogonale : application aux composites carbone-époxy, PhD Thesis, Toulouse
29.
go back to reference Blanchet F, Lachaud F, Piquet R, Landon Y (2020) Experimental study of orthogonal cutting of unidirectional CFRP laminates. Int J Mach Mach Mater 22:454–486 Blanchet F, Lachaud F, Piquet R, Landon Y (2020) Experimental study of orthogonal cutting of unidirectional CFRP laminates. Int J Mach Mach Mater 22:454–486
32.
go back to reference Bonnet C, Rech J, Poulachon G (2020) Characterization of friction coefficient for simulating drilling contact for titanium TiAl6V4 alloy. CIRP J Manuf Sci Technol 29:130–137CrossRef Bonnet C, Rech J, Poulachon G (2020) Characterization of friction coefficient for simulating drilling contact for titanium TiAl6V4 alloy. CIRP J Manuf Sci Technol 29:130–137CrossRef
38.
go back to reference Bouzakis K, Bouzakis E, Kombogiannis S, Makrimallakis S, Skordaris G, Michailidis N, Charalampous P, Paraskevopoulou R, M’Saoubi R, Aurich J (2014) Effect of cutting edge preparation of coated tools on their performance in milling various materials. CIRP J Manuf Sci Technol 7:264–273CrossRef Bouzakis K, Bouzakis E, Kombogiannis S, Makrimallakis S, Skordaris G, Michailidis N, Charalampous P, Paraskevopoulou R, M’Saoubi R, Aurich J (2014) Effect of cutting edge preparation of coated tools on their performance in milling various materials. CIRP J Manuf Sci Technol 7:264–273CrossRef
39.
go back to reference Boyer H-F, Koppka F, Ranc N, Lorong P (2012) Identification of the heat input during dry or MQL machining. In: 9th International Conference of High Speed Machining - HSM 2012, Conference of High Speed Machining, Espagne Boyer H-F, Koppka F, Ranc N, Lorong P (2012) Identification of the heat input during dry or MQL machining. In: 9th International Conference of High Speed Machining - HSM 2012, Conference of High Speed Machining, Espagne
40.
go back to reference Boyer H-F, Ranc N, Frabolot M, Koppka F, Lorong P (2012) Simulating the heat distortiion of a cast iron brake disc during dry machining, 7ème Assises MUGV. Saint- Etienne, France, p 10 Boyer H-F, Ranc N, Frabolot M, Koppka F, Lorong P (2012) Simulating the heat distortiion of a cast iron brake disc during dry machining, 7ème Assises MUGV. Saint- Etienne, France, p 10
41.
go back to reference Braham T, Germain G, Robert R, Lebrun J, Auger S (2009) High pressure water jet assisted machining of duplex steel: machinability and tool life. Presented at the 12th CIRP Conference on Modelling of Machining Operations, Donostia-San Sebastiân, Spanien. https://doi.org/10.1007/s12289-010-0818-9 Braham T, Germain G, Robert R, Lebrun J, Auger S (2009) High pressure water jet assisted machining of duplex steel: machinability and tool life. Presented at the 12th CIRP Conference on Modelling of Machining Operations, Donostia-San Sebastiân, Spanien. https://​doi.​org/​10.​1007/​s12289-010-0818-9
42.
go back to reference Braham-Bouchnak T (2010). Study of extreme stress behavior and machinability of a new aeronautical titanium alloy: the ti555–3 (PhD Thesis). HESAM ParisTech Braham-Bouchnak T (2010). Study of extreme stress behavior and machinability of a new aeronautical titanium alloy: the ti555–3 (PhD Thesis). HESAM ParisTech
46.
go back to reference Calatoru V, Balazinski M, Mayer J, Paris H, L’Espérance G (2008) Diffusion wear mechanism during high-speed machining of 7475–T7351 aluminum alloy with carbide end mills. Wear 265:1793–1800CrossRef Calatoru V, Balazinski M, Mayer J, Paris H, L’Espérance G (2008) Diffusion wear mechanism during high-speed machining of 7475–T7351 aluminum alloy with carbide end mills. Wear 265:1793–1800CrossRef
50.
go back to reference Chaabani S, Rodriguez I, Cuesta M, Ayed Y, Arrazola PJ, Germain G (2019) Tool wear and cutting forces when machining inconel 718 under cryogenic conditions: liquid nitrogen and carbon dioxide. Presented at the AIP Conference Proceedings, Proceedings of the 22nd International Esaform Conference On Material Forming: ESAFORM 2019, Victoria-Gasteiz, Spain. https://doi.org/10.1063/1.5112610 Chaabani S, Rodriguez I, Cuesta M, Ayed Y, Arrazola PJ, Germain G (2019) Tool wear and cutting forces when machining inconel 718 under cryogenic conditions: liquid nitrogen and carbon dioxide. Presented at the AIP Conference Proceedings, Proceedings of the 22nd International Esaform Conference On Material Forming: ESAFORM 2019, Victoria-Gasteiz, Spain. https://​doi.​org/​10.​1063/​1.​5112610
60.
go back to reference Courbon C, Kramar D, Krajnik P, Pusavec F, Rech J, Kopac J (2009) Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: an experimental study. Int J Mach Tools Manuf 49:1114–1125CrossRef Courbon C, Kramar D, Krajnik P, Pusavec F, Rech J, Kopac J (2009) Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: an experimental study. Int J Mach Tools Manuf 49:1114–1125CrossRef
61.
go back to reference Courbon C, Mabrouki T, Rech J, Mazuyer D, D’Eramo E (2013) On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: formation mechanisms and influence on the cutting process. Appl Therm Eng 50:1311–1325CrossRef Courbon C, Mabrouki T, Rech J, Mazuyer D, D’Eramo E (2013) On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: formation mechanisms and influence on the cutting process. Appl Therm Eng 50:1311–1325CrossRef
66.
go back to reference Courbon C, Sajn V, Kramar D, Rech J, Kosel F, Kopac J (2011) Investigation of machining performance in high pressure jet assisted turning of Inconel 718: a numerical model. J Mater Process Technol 211:1834–1851CrossRef Courbon C, Sajn V, Kramar D, Rech J, Kosel F, Kopac J (2011) Investigation of machining performance in high pressure jet assisted turning of Inconel 718: a numerical model. J Mater Process Technol 211:1834–1851CrossRef
67.
go back to reference de Eguilaz ER, Rech J, Arrazola P (2010) Characterization of friction coefficient and heat partition coefficient between an AISI4140 steel and a TiN-coated carbide–influence of (Ca, Mn, S) steel’s inclusions. Proc. Inst. Mech Eng Part J J Eng Tribol 224:1115–1127. https://doi.org/10.1243/13506501JET818CrossRef de Eguilaz ER, Rech J, Arrazola P (2010) Characterization of friction coefficient and heat partition coefficient between an AISI4140 steel and a TiN-coated carbide–influence of (Ca, Mn, S) steel’s inclusions. Proc. Inst. Mech Eng Part J J Eng Tribol 224:1115–1127. https://​doi.​org/​10.​1243/​13506501JET818CrossRef
69.
go back to reference Denguir L, Besnard A, Fromentin G, Poulachon G, Zhu X (2016) Flank wear prediction in milling AISI 4140 based on cutting forces PCA for different cutting edge preparations. Int J Mach Mach Mater 18:273–287 Denguir L, Besnard A, Fromentin G, Poulachon G, Zhu X (2016) Flank wear prediction in milling AISI 4140 based on cutting forces PCA for different cutting edge preparations. Int J Mach Mach Mater 18:273–287
71.
go back to reference Desaigues J-E, Lescalier C, Bomont-Arzur A, Dudzinski D, Bomont O (2016) Experimental study of built-up layer formation during machining of high strength free-cutting steel. J Mater Process Technol 236:204–215CrossRef Desaigues J-E, Lescalier C, Bomont-Arzur A, Dudzinski D, Bomont O (2016) Experimental study of built-up layer formation during machining of high strength free-cutting steel. J Mater Process Technol 236:204–215CrossRef
73.
go back to reference Duchosal A, Serra R, Leroy R (2014) Static numerical simulation of oil mist particle size effects on a range of internal channel geometries of a cutting tool used in MQL strategy. Int J Eng Sci Innov Tech (IJESIT) 3(1) Duchosal A, Serra R, Leroy R (2014) Static numerical simulation of oil mist particle size effects on a range of internal channel geometries of a cutting tool used in MQL strategy. Int J Eng Sci Innov Tech (IJESIT) 3(1)
76.
go back to reference Ducobu F, Rivière-Lorphèvre E, Filippi E (2017) Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica 52:1577–1592CrossRef Ducobu F, Rivière-Lorphèvre E, Filippi E (2017) Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica 52:1577–1592CrossRef
78.
go back to reference Dutilh V, Dessein G, Alexis J, Perrin G (2010) Links between machining parameters and surface integrity in drilling Ni-superalloy. Trans Tech Publications Ltd, Presented at the Advanced Materials Research, pp 171–178 Dutilh V, Dessein G, Alexis J, Perrin G (2010) Links between machining parameters and surface integrity in drilling Ni-superalloy. Trans Tech Publications Ltd, Presented at the Advanced Materials Research, pp 171–178
79.
go back to reference Dutilh V, Popa A, Dessein G, Alexis J, Perrin G (2010) Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. In: CIRP ICME ’10 - 7th CIRP International Conference on Intelligent computation in manufacturing engineering, 23 June 2010 - 25 June 2010 (Capri (Gulf of Naples), Italy) Dutilh V, Popa A, Dessein G, Alexis J, Perrin G (2010) Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. In: CIRP ICME ’10 - 7th CIRP International Conference on Intelligent computation in manufacturing engineering, 23 June 2010 - 25 June 2010 (Capri (Gulf of Naples), Italy)
81.
go back to reference Faverjon P, Rech J, Leroy R (2013) Influence of minimum quantity lubrication on friction coefficient and work-material adhesion during machining of cast aluminum with various cutting tool substrates made of polycrystalline diamond, high speed steel, and carbides. J Tribol 135. https://doi.org/10.1115/1.4024546 Faverjon P, Rech J, Leroy R (2013) Influence of minimum quantity lubrication on friction coefficient and work-material adhesion during machining of cast aluminum with various cutting tool substrates made of polycrystalline diamond, high speed steel, and carbides. J Tribol 135. https://​doi.​org/​10.​1115/​1.​4024546
84.
go back to reference Germain G, Dal Santo P, Lebrun J-L (2011) Comprehension of chip formation in laser assisted machining. Int J Mach Tools Manuf 51:230–238CrossRef Germain G, Dal Santo P, Lebrun J-L (2011) Comprehension of chip formation in laser assisted machining. Int J Mach Tools Manuf 51:230–238CrossRef
86.
go back to reference Germain G, Robert P, Lebrun J-L, Dal Santo P, Poitou A (2005) Finite International Journal of Forming Processes 8:347–361 Germain G, Robert P, Lebrun J-L, Dal Santo P, Poitou A (2005) Finite International Journal of Forming Processes 8:347–361
87.
go back to reference Ginting A, Nouari M (2009) Surface integrity of drymachined titanium alloys. Int J Mach Tools Manuf 49:325–332CrossRef Ginting A, Nouari M (2009) Surface integrity of drymachined titanium alloys. Int J Mach Tools Manuf 49:325–332CrossRef
89.
go back to reference Girinon M, Karaouni H, Masciantonio U, Lefebvre F, Jourden E, Valiorgue F, Rech J, Feulvarch E (2019) Risks related to the lack of lubrication on surface integrity in drilling. Heliyon 5:e01138CrossRefPubMedPubMedCentral Girinon M, Karaouni H, Masciantonio U, Lefebvre F, Jourden E, Valiorgue F, Rech J, Feulvarch E (2019) Risks related to the lack of lubrication on surface integrity in drilling. Heliyon 5:e01138CrossRefPubMedPubMedCentral
90.
go back to reference Grzesik W, Kiszka P, Kowalczyk D, Żak K, Rech J (2014) Investigation of the machining process of spheroidal cast iron using cubic boron nitride (CBN) tools. Metalurgija 53:33–36 Grzesik W, Kiszka P, Kowalczyk D, Żak K, Rech J (2014) Investigation of the machining process of spheroidal cast iron using cubic boron nitride (CBN) tools. Metalurgija 53:33–36
91.
go back to reference Grzesik W, Rech J, Żak K (2014) Determination of friction in metal cutting with tool wear and flank face effects. Wear 317:8–16CrossRef Grzesik W, Rech J, Żak K (2014) Determination of friction in metal cutting with tool wear and flank face effects. Wear 317:8–16CrossRef
92.
go back to reference Habak M, Lebrun J, Huneau B, Germain G, Robert P (2006) Effect of carbides and cutting parameters on chip morphology and cutting temperature during orthogonal hard turning of 100Cr6 bearing steel with a cBN cutting tool. Presented at the 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia Habak M, Lebrun J, Huneau B, Germain G, Robert P (2006) Effect of carbides and cutting parameters on chip morphology and cutting temperature during orthogonal hard turning of 100Cr6 bearing steel with a cBN cutting tool. Presented at the 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia
97.
go back to reference Hamm I, Poulachon G, Rossi F, Biremaux H (2021) Innovative experimental measurements of cutting temperature and thermal partition during Ti-6Al-4V orthogonal cutting. Procedia CIRP, 18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia, 102:281–286. https://doi.org/10.1016/j.procir.2021.09.048 Hamm I, Poulachon G, Rossi F, Biremaux H (2021) Innovative experimental measurements of cutting temperature and thermal partition during Ti-6Al-4V orthogonal cutting. Procedia CIRP, 18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia, 102:281–286. https://​doi.​org/​10.​1016/​j.​procir.​2021.​09.​048
100.
go back to reference Harzallah M, Pottier T, Senatore J, Mousseigne M, Germain G, Landon Y (2017) Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting. Int J Mech Sci 134:189–202CrossRef Harzallah M, Pottier T, Senatore J, Mousseigne M, Germain G, Landon Y (2017) Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting. Int J Mech Sci 134:189–202CrossRef
103.
go back to reference Hribersek M, Sajn V, Pusavec F, Rech J, Kopac J (2017) The procedure of solving the inverse problem for determining surface heat transfer coefficient between liquefied nitrogen and inconel 718 workpiece in cryogenic machining. Procedia CIRP 58:617–622CrossRef Hribersek M, Sajn V, Pusavec F, Rech J, Kopac J (2017) The procedure of solving the inverse problem for determining surface heat transfer coefficient between liquefied nitrogen and inconel 718 workpiece in cryogenic machining. Procedia CIRP 58:617–622CrossRef
105.
go back to reference Jawahir I, Attia H, Biermann D, Duflou J, Klocke F, Meyer D, Newman S, Pusavec F, Putz M, Rech J (2016) Cryogenic manufacturing processes. CIRP Ann 65:713–736CrossRef Jawahir I, Attia H, Biermann D, Duflou J, Klocke F, Meyer D, Newman S, Pusavec F, Putz M, Rech J (2016) Cryogenic manufacturing processes. CIRP Ann 65:713–736CrossRef
109.
go back to reference Samuel KK, Birembaux H, Rossi F, Poulachon G (2022) Etude expérimentale de l’usinage du Ti6Al4V sous assistance CO2 supercritique. Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay, Oct 2022, Gif Sur Yvette, France Samuel KK, Birembaux H, Rossi F, Poulachon G (2022) Etude expérimentale de l’usinage du Ti6Al4V sous assistance CO2 supercritique. Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay, Oct 2022, Gif Sur Yvette, France
117.
go back to reference List G, Sutter G, Bi XF, Molinari A, Bouthiche A (2013) Strain, strain rate and velocity fields determination at very high cutting speed. J Mater Process Technol 213:693–699CrossRef List G, Sutter G, Bi XF, Molinari A, Bouthiche A (2013) Strain, strain rate and velocity fields determination at very high cutting speed. J Mater Process Technol 213:693–699CrossRef
118.
go back to reference Mabrouki T, Deshayes L, Ivester R, Rigal J, Jurrens K (2004) Material modeling and experimental study of serrated chip morphology. In: Proceedings of the 7th CIRP International Workshop on The Modeling of Machining Operations, ENSAM, Cluny, France, pp 4–5 Mabrouki T, Deshayes L, Ivester R, Rigal J, Jurrens K (2004) Material modeling and experimental study of serrated chip morphology. In: Proceedings of the 7th CIRP International Workshop on The Modeling of Machining Operations, ENSAM, Cluny, France, pp 4–5
122.
go back to reference Molinari A, Musquar C, Sutter G (2002) Adiabatic shear banding in high speed machining of Ti–6Al–4V: experiments and modeling. Int J Plast 18:443–459CrossRef Molinari A, Musquar C, Sutter G (2002) Adiabatic shear banding in high speed machining of Ti–6Al–4V: experiments and modeling. Int J Plast 18:443–459CrossRef
133.
go back to reference Naisson P, Joel R, Paris H (2013) Characterization of friction properties during machining of various stainless steels. Eng Trans 61:239–248 Naisson P, Joel R, Paris H (2013) Characterization of friction properties during machining of various stainless steels. Eng Trans 61:239–248
138.
go back to reference Nouari M, Makich H (2013) Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555. Int J Refract Met Hard Mater 41:259–269CrossRef Nouari M, Makich H (2013) Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555. Int J Refract Met Hard Mater 41:259–269CrossRef
142.
go back to reference Popa A, Baili M, Dessein G, Dutilh V (2011) Identification of tool failure modes in drilling Udimet® 720 superalloy. In: International conference on structural analysis of advanced materials, 7 - 10 Sept 2011, Sinaia, Romania Popa A, Baili M, Dessein G, Dutilh V (2011) Identification of tool failure modes in drilling Udimet® 720 superalloy. In: International conference on structural analysis of advanced materials, 7 - 10 Sept 2011, Sinaia, Romania
156.
go back to reference Rech J (2006) A multiview approach to the tribological characterisation of cutting tool coatings for steels in high-speed dry turning. Int J Mach Mach Mater 1:27–44 Rech J (2006) A multiview approach to the tribological characterisation of cutting tool coatings for steels in high-speed dry turning. Int J Mach Mach Mater 1:27–44
169.
go back to reference Rigal J-F, Zapciu M, Mabrouki T, Belhadi S (2006) Sawtooth chip formation in hard turning and the approach to separate process segmentation and machine assembly vibration frequencies. In: Proceedings of the 15th International Conference on Manufacturing Systems – ICMaS. Editura Academiei Române Rigal J-F, Zapciu M, Mabrouki T, Belhadi S (2006) Sawtooth chip formation in hard turning and the approach to separate process segmentation and machine assembly vibration frequencies. In: Proceedings of the 15th International Conference on Manufacturing Systems – ICMaS. Editura Academiei Române
171.
go back to reference Sela A, Ortiz-De-Zarate G, Soler D, Aristimuño P, Soriano D, Germain G, Ducobu F, Arrazola PJ (2020) Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion. Procedia CIRP 87:372–377CrossRef Sela A, Ortiz-De-Zarate G, Soler D, Aristimuño P, Soriano D, Germain G, Ducobu F, Arrazola PJ (2020) Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion. Procedia CIRP 87:372–377CrossRef
176.
go back to reference Sutter G, Faure L, Molinari A, Ranc A, Pina V (2003) An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining. Int J Mach Tools Manuf 43:671–678CrossRef Sutter G, Faure L, Molinari A, Ranc A, Pina V (2003) An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining. Int J Mach Tools Manuf 43:671–678CrossRef
184.
go back to reference Valiorgue F, Rech J, Hamdi H, Bonnet C, Gilles P, Bergheau J (2008) Modelling of friction phenomena in material removal processes. J Mater Process Technol 201:450–453CrossRef Valiorgue F, Rech J, Hamdi H, Bonnet C, Gilles P, Bergheau J (2008) Modelling of friction phenomena in material removal processes. J Mater Process Technol 201:450–453CrossRef
185.
go back to reference Wagner V, Baili M, Dessein G (2015) The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting. Int J Adv Manuf Technol 76:893–912CrossRef Wagner V, Baili M, Dessein G (2015) The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting. Int J Adv Manuf Technol 76:893–912CrossRef
186.
go back to reference Wagner V, Barelli F, Dessein G, Laheurte R, Darnis P, Cahuc O, Mousseigne M (2018) Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure. J Manuf Sci Eng 140 Wagner V, Barelli F, Dessein G, Laheurte R, Darnis P, Cahuc O, Mousseigne M (2018) Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure. J Manuf Sci Eng 140
187.
go back to reference Wagner V, Barelli F, Dessein G, Laheurte R, Darnis P, Cahuc O, Mousseigne M (2018) Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium structure. J Manuf Sci Eng Trans ASME 140. https://doi.org/10.1115/1.4038597 Wagner V, Barelli F, Dessein G, Laheurte R, Darnis P, Cahuc O, Mousseigne M (2018) Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium structure. J Manuf Sci Eng Trans ASME 140. https://​doi.​org/​10.​1115/​1.​4038597
192.
go back to reference Wagner V, Vissio A, Duc E, Pijolat M (2016) Relationship between cutting conditions and chips morphology during milling of aluminium Al-2050. Int J Adv Manuf Technol 82:1881–1897CrossRef Wagner V, Vissio A, Duc E, Pijolat M (2016) Relationship between cutting conditions and chips morphology during milling of aluminium Al-2050. Int J Adv Manuf Technol 82:1881–1897CrossRef
193.
go back to reference Wanigarathne P, Kardekar A, Dillon O, Poulachon G, Jawahir I (2005) Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature. Wear 259:1215–1224CrossRef Wanigarathne P, Kardekar A, Dillon O, Poulachon G, Jawahir I (2005) Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature. Wear 259:1215–1224CrossRef
194.
go back to reference Werda S, Duchosal A, Le Quilliec G, Morandeau A, Leroy R (2019) Effect of minimum quantity lubrication strategies on tribological study of simulated machining operation. Mech Ind 20:624CrossRef Werda S, Duchosal A, Le Quilliec G, Morandeau A, Leroy R (2019) Effect of minimum quantity lubrication strategies on tribological study of simulated machining operation. Mech Ind 20:624CrossRef
199.
go back to reference Zemzemi F, Bensalem W, Rech J, Dogui A, Kapsa P (2008) New tribometer designed for the characterisation of the friction properties at the tool/chip/workpiece interfaces in machining. Tribotest 14:11–25CrossRef Zemzemi F, Bensalem W, Rech J, Dogui A, Kapsa P (2008) New tribometer designed for the characterisation of the friction properties at the tool/chip/workpiece interfaces in machining. Tribotest 14:11–25CrossRef
Metadata
Title
State of the art of research studies on machining processes by French research network Manufacturing’21
Author
Vincent Wagner
Publication date
02-12-2023
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 2/2024
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-023-12687-1

Other articles of this Issue 2/2024

The International Journal of Advanced Manufacturing Technology 2/2024 Go to the issue

Premium Partners