Strength of Materials 2/2021

09-07-2021 | SCIENTIFIC AND TECHNICAL SECTION

Analysis of Irradiation Swelling and Irradiation Creep Models with the Stress Effect Account in the Problems of Inelastic Strain Mechanics. Part 1. Formulation of Constitutive Equations

O. Yu. Chirkov

07-07-2021

Peculiarities of Short Fatigue Cracks Growth from a Blind Hole in Specimens Made of Steel 45. Part 1. Experimental Results

O. M. Herasymchuk, O. V. Kononuchenko

07-07-2021

Influence of the Accompanying Heating on the Efficiency of Electrodynamic Treatment of AMg6 Aluminum Alloy Welded Joints

L. M. Lobanov, M. O. Pashchyn, O. L. Mikhodui, P. V. Goncharov, Yu. M. Sydorenko, P. R. Ustymenko

07-07-2021

Evaluation of the Durability of the Fiber-Reinforced Concrete Beam Under Long-Term Pure Bending and Local Creep

O. E. Andreikiv, I. Ya. Dolins’ka, O. K. Raiter

08-07-2021

Deformation Relief of the Surface as a Characteristic of Fatigue Damage of Clad Aluminum Alloys. Part 2. Fatigue Degradation of a Cladding Layer

S. R. Ignatovich, M. V. Karuskevich, S. S. Yutzkevich

07-07-2021

Mechanical Properties of Carbon Fiber-Reinforced Plastics at Cryogenic Temperatures

E. V. Vorob’ov, M. P. Zemtsov, L. S. Novogruds’kyi, V. O. Stryzhalo, O. M. Potapov, I. O. Gusarova, I. I. Derev’yanko, O. P. Romens’ka

21-07-2021

Calculation Method for Axisymmetric Bending of Circular and Annular Plates on a Changeable Elastic Bed. Part 1. Analytical Relations

Yu. S. Krutii, M. G. Sur’yaninov, G. S. Karnaukhova

08-07-2021

The Use of One of the Potential Theory Methods to Study the Static Deformation of Composite Cylindrical Shells

S. A. Levchuk, A. A. Khmel’nyts’kyi

08-07-2021

Finite Element Model of Laminated Shells of Composite Materials

V. V. Astanin, S. Yu. Bogdan

07-07-2021

Some Mechanical Characteristics of Structural Steels of Cooling Systems of Continuous Operation

A. V. Boiko, V. D. Makarenko, S. Yu. Maksymov

10-07-2021

Development of Full-Strength Elastic Element Section with Open Shell

I. P. Shats’kyi, V. M. Shopa, A. S. Velychkovych

08-07-2021

Influence of Thickness and Dispersed Impurities on Residual Stresses in Epoxy Composite Coatings

I. G. Dobrotvor, P. D. Stukhlyak, A. G. Mykytyshyn, D. P. Stukhlyak

08-07-2021

Life of Boride Coatings on Steels Under Cyclic Contact Load

P. V. Kaplun, B. A. Lyashenko, O. Yu. Rudyk, V. A. Gonchar

08-07-2021

Effective Width of the Free Flange of the Ship’s Wide Beam with an Axis Bend

V. M. Sokov

05-07-2021

Unified Method for Evaluating the Strength Properties of the Bottom Parts of High-Pressure Hydraulic Cylinders

O. S. Korchak

10-07-2021

Low-Temperature Crack Resistance of Cryogenic Structures

N. A. Makhutov, I. V. Makarenko, L. V. Makarenko

10-07-2021

The Analytical Investigation on the Shear Strength of Discontinuities in Rocks Considering the Effect of Roughness and Dilatancy Angle

X. P. Zhou, Y. C. Zhang, H. Cheng, F. Bertob

08-07-2021

Equivalent Properties Prediction of the Composite Ceramics with an Arbitrary-Shaped Inclusion

J. F. Yu, X. H. Ni, Z. G. Cheng, W. H. He, X. Q. Liu, Y. W. Fu

08-07-2021

Experimental Study on the Surface Property Changes of Aluminum Alloy and Stainless Steel after Impingement with Submerged Cavitation Jet

Y. F. Yang, W. D. Shi, W. Li, S. P. Chen, W. Q. Zhang, B. Pan

10-07-2021

Life Assessment of HP-40Nb Reformer Furnace Tube of a Petrochemical Plant

H. Kazempour-Liasi, Z. Lalegani, M. Rayatpour

05-07-2021 | Author Correction

Correction to: Effect of pulse current on the wear behavior of a cold-rolled commercially pure aluminum sheet

H. Song, W. X. Hao, X. W. Mu, F. Q. Zhao, X. Hao, G. H. Geng

Springer Professional

Strength of Materials

Issue 2/2021

Table of Contents (21 Articles)

Analysis of Irradiation Swelling and Irradiation Creep Models with the Stress Effect Account in the Problems of Inelastic Strain Mechanics. Part 1. Formulation of Constitutive Equations

Peculiarities of Short Fatigue Cracks Growth from a Blind Hole in Specimens Made of Steel 45. Part 1. Experimental Results

Influence of the Accompanying Heating on the Efficiency of Electrodynamic Treatment of AMg6 Aluminum Alloy Welded Joints

Evaluation of the Durability of the Fiber-Reinforced Concrete Beam Under Long-Term Pure Bending and Local Creep

Deformation Relief of the Surface as a Characteristic of Fatigue Damage of Clad Aluminum Alloys. Part 2. Fatigue Degradation of a Cladding Layer

Mechanical Properties of Carbon Fiber-Reinforced Plastics at Cryogenic Temperatures

Calculation Method for Axisymmetric Bending of Circular and Annular Plates on a Changeable Elastic Bed. Part 1. Analytical Relations

The Use of One of the Potential Theory Methods to Study the Static Deformation of Composite Cylindrical Shells

Finite Element Model of Laminated Shells of Composite Materials

Some Mechanical Characteristics of Structural Steels of Cooling Systems of Continuous Operation

Development of Full-Strength Elastic Element Section with Open Shell

Influence of Thickness and Dispersed Impurities on Residual Stresses in Epoxy Composite Coatings

Life of Boride Coatings on Steels Under Cyclic Contact Load

Effective Width of the Free Flange of the Ship’s Wide Beam with an Axis Bend

Unified Method for Evaluating the Strength Properties of the Bottom Parts of High-Pressure Hydraulic Cylinders

Low-Temperature Crack Resistance of Cryogenic Structures

The Analytical Investigation on the Shear Strength of Discontinuities in Rocks Considering the Effect of Roughness and Dilatancy Angle

Equivalent Properties Prediction of the Composite Ceramics with an Arbitrary-Shaped Inclusion

Experimental Study on the Surface Property Changes of Aluminum Alloy and Stainless Steel after Impingement with Submerged Cavitation Jet

Life Assessment of HP-40Nb Reformer Furnace Tube of a Petrochemical Plant

Correction to: Effect of pulse current on the wear behavior of a cold-rolled commercially pure aluminum sheet

Current Publications

Issue 2/2022

Issue 1/2022

Issue 6/2021

Issue 5/2021

Issue 4/2021

Issue 3/2021

Issue 2/2021

Issue 1/2021

Issue 6/2020

Issue 5/2020

Premium Partners