Skip to main content
Top
Published in:

26-05-2023 | Original Paper

Study on formation of dry band on wet polluted surface attached with float potential metal based on distributed parameter optimization simulation

Authors: Lin Mu, Bo Wang, Jinpeng Hao, Ziyi Fang, Yu Wang, Lei Lan

Published in: Electrical Engineering | Issue 5/2023

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Under the condition of contamination and damp, the metal bolts on the composite tower become float potential conductor. Serious partial arc discharge appears near the metal bolt, which threatens the safe operation of the transmission line. The artificial pollution test is carried out on the small size specimen to reproduce the discharge phenomenon and obtain the characteristic parameters. Based on the parameter optimization method with infrared temperature data as constraints, the distributed parameter finite element model of the specimen is calculated to obtain the electric field and current density distribution. The results reveal that when the dry band is newly formed, the current density and temperature at both ends of the dry band are very high, which make the dry band propagate to both sides and pass through the pollution layer. When the dry band just passes through the pollution layer, the leakage current is blocked and the electric field on dry band is intensified, leading to dry band discharge. It can be inferred from the electric field of the pollution layer that the arc cannot develop forward, but it will appear intermittently on the dry band.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Selvaraj M, Kulkarni SM, Rameshbabu R (2014) Performance analysis of a overhead power transmission line tower using polymer composite material. Proc Mater Sci 5(1):1340–1348CrossRef Selvaraj M, Kulkarni SM, Rameshbabu R (2014) Performance analysis of a overhead power transmission line tower using polymer composite material. Proc Mater Sci 5(1):1340–1348CrossRef
2.
go back to reference Wang J, Long M, He J, Ma Y, Liu K (2017) Experimental study on ice-covered samples of composite material tower. IEEE Trans Dielectr Electr Insul 24(5):2937–2944CrossRef Wang J, Long M, He J, Ma Y, Liu K (2017) Experimental study on ice-covered samples of composite material tower. IEEE Trans Dielectr Electr Insul 24(5):2937–2944CrossRef
3.
go back to reference Li Z, Chen W, Jiang W, Wang C, Dai M, Liu Z (2015) Research on lightning protection of lattice composite material tower of 110 kV double circuit line. High Voltage Eng 41(1):76–83 Li Z, Chen W, Jiang W, Wang C, Dai M, Liu Z (2015) Research on lightning protection of lattice composite material tower of 110 kV double circuit line. High Voltage Eng 41(1):76–83
4.
go back to reference Li Z, Chen W, Jiang W, Wang C, Liu Z (2015) Research on lightning protection of lattice composite material tower of 110 kV double circuit line. Gaodianya Jishu/High Voltage Eng 41(1):76–83 Li Z, Chen W, Jiang W, Wang C, Liu Z (2015) Research on lightning protection of lattice composite material tower of 110 kV double circuit line. Gaodianya Jishu/High Voltage Eng 41(1):76–83
5.
go back to reference Lopes IJS, Jayaram SH, Cherney EA (2002) A method for detecting the transition from corona from water droplets to dry-band arcing on silicone rubber insulators. IEEE Trans Dielectr Electr Insul 9(6):964–971CrossRef Lopes IJS, Jayaram SH, Cherney EA (2002) A method for detecting the transition from corona from water droplets to dry-band arcing on silicone rubber insulators. IEEE Trans Dielectr Electr Insul 9(6):964–971CrossRef
6.
go back to reference Arshad A, Nekahi SG, McMeekin, Farzaneh M (2017) Effect of pollution severity and dry band location on the flashover characteristics of silicone rubber surfaces. Electr Eng 99(3):1053–1063. Arshad A, Nekahi SG, McMeekin, Farzaneh M (2017) Effect of pollution severity and dry band location on the flashover characteristics of silicone rubber surfaces. Electr Eng 99(3):1053–1063.
7.
go back to reference Sakoda T et al (2018) Discharge behavior and dielectric performance of artificially polluted hydrophobic silicone rubber. J Electrostat 93:97–103CrossRef Sakoda T et al (2018) Discharge behavior and dielectric performance of artificially polluted hydrophobic silicone rubber. J Electrostat 93:97–103CrossRef
8.
go back to reference Salthouse E (1971) Dry-band formation and flashover in uniform-field gaps. Proc Inst Electr Eng 118(3–4):630CrossRef Salthouse E (1971) Dry-band formation and flashover in uniform-field gaps. Proc Inst Electr Eng 118(3–4):630CrossRef
9.
go back to reference Salthouse EC (1968) Initiation of dry bands on polluted insulation. Proc Inst Electr Eng 115(11):1707–1712CrossRef Salthouse EC (1968) Initiation of dry bands on polluted insulation. Proc Inst Electr Eng 115(11):1707–1712CrossRef
10.
go back to reference SubbaReddy B, Nagabhushana GR (2003) Study of temperature distribution along an artificially polluted insulator string. Plasma Sci Technol 5(2):1715–1720CrossRef SubbaReddy B, Nagabhushana GR (2003) Study of temperature distribution along an artificially polluted insulator string. Plasma Sci Technol 5(2):1715–1720CrossRef
11.
go back to reference Jin L, Ai J, Tian Z, Zhang Y (2018) Detection of polluted insulators using the information fusion of multispectral images. IEEE Trans Dielectr Electr Insul 24(6):3530–3538CrossRef Jin L, Ai J, Tian Z, Zhang Y (2018) Detection of polluted insulators using the information fusion of multispectral images. IEEE Trans Dielectr Electr Insul 24(6):3530–3538CrossRef
12.
go back to reference Chrzan KL, Moro F (2007) Concentrated discharges and dry bands on polluted outdoor insulators. IEEE Trans Power Deliv 22(1):466–471CrossRef Chrzan KL, Moro F (2007) Concentrated discharges and dry bands on polluted outdoor insulators. IEEE Trans Power Deliv 22(1):466–471CrossRef
13.
go back to reference Albano M, Waters RT, Charalampidis P, Griffiths H, Haddad A (2016) Infrared analysis of dry-band flashover of silicone rubber insulators. IEEE Trans Dielectr Electr Insul 23(1):304–310CrossRef Albano M, Waters RT, Charalampidis P, Griffiths H, Haddad A (2016) Infrared analysis of dry-band flashover of silicone rubber insulators. IEEE Trans Dielectr Electr Insul 23(1):304–310CrossRef
14.
go back to reference Waters RT, Haddad A, Griffiths H, Harid N, Charalampidis P, Sarkar P (2011) Dry-band discharges on polluted silicone rubber insulation: control and characterization. IEEE Trans Dielectr Electr Insul 18(6):1995–2003CrossRef Waters RT, Haddad A, Griffiths H, Harid N, Charalampidis P, Sarkar P (2011) Dry-band discharges on polluted silicone rubber insulation: control and characterization. IEEE Trans Dielectr Electr Insul 18(6):1995–2003CrossRef
15.
go back to reference Hadjrioua F, Mahi D, Slama MEA (2017) Electro-thermal dynamic model using the analytical arc parameters for the prediction of the critical flashover on the HVDC polluted insulator. IET Gener Transm Distrib 11(2):427–436CrossRef Hadjrioua F, Mahi D, Slama MEA (2017) Electro-thermal dynamic model using the analytical arc parameters for the prediction of the critical flashover on the HVDC polluted insulator. IET Gener Transm Distrib 11(2):427–436CrossRef
16.
go back to reference Bo L, Gorur RS (2012) Modeling flashover of AC outdoor insulators under contaminated conditions with dry band formation and arcing. IEEE Trans Dielectr Electr Insul 19(3):1037–1043CrossRef Bo L, Gorur RS (2012) Modeling flashover of AC outdoor insulators under contaminated conditions with dry band formation and arcing. IEEE Trans Dielectr Electr Insul 19(3):1037–1043CrossRef
17.
go back to reference Dhahbi-Megriche N, Beroual A (2016) Self-consistent multi-arcs dynamic model for high voltage polluted insulators. IEEE Trans Dielectr Electr Insul 23(5):2899–2907CrossRef Dhahbi-Megriche N, Beroual A (2016) Self-consistent multi-arcs dynamic model for high voltage polluted insulators. IEEE Trans Dielectr Electr Insul 23(5):2899–2907CrossRef
18.
go back to reference Li ZS, Li WL, Yao JG, Yang YJ (2010) On-site detection of pollution level of insulators based on infrared-thermal-image processing. Proc CSEE 30(4):132–138 Li ZS, Li WL, Yao JG, Yang YJ (2010) On-site detection of pollution level of insulators based on infrared-thermal-image processing. Proc CSEE 30(4):132–138
19.
go back to reference Terrab H, Boulanouar H, Bayadi A (2018) Flashover process analysis of non-uniformly polluted insulation surface using experimental design methodology and finite element method. Electric Power Syst Res 163:581–589CrossRef Terrab H, Boulanouar H, Bayadi A (2018) Flashover process analysis of non-uniformly polluted insulation surface using experimental design methodology and finite element method. Electric Power Syst Res 163:581–589CrossRef
20.
go back to reference Hussain MM, Farokhi S, Mcmeekin SG, Farzaneh M (2015) Dry band formation on HV insulators olluted with different salt mixtures. In: IEEE Conference on Electrical Insulation and Dielectric Phenomena Hussain MM, Farokhi S, Mcmeekin SG, Farzaneh M (2015) Dry band formation on HV insulators olluted with different salt mixtures. In: IEEE Conference on Electrical Insulation and Dielectric Phenomena
21.
go back to reference Vitelli M, Tucci V, Petrarca C (2000) Temperature distribution along an outdoor insulator subjected to different pollution levels. IEEE Trans Dielectr Electr Insul 7(3):416–423CrossRef Vitelli M, Tucci V, Petrarca C (2000) Temperature distribution along an outdoor insulator subjected to different pollution levels. IEEE Trans Dielectr Electr Insul 7(3):416–423CrossRef
22.
go back to reference Ming Z, Zhu X, Da Z (2017) Research on Temperature field of polluted and wetted insulators. Insulat Mater 50(10):201–204 Ming Z, Zhu X, Da Z (2017) Research on Temperature field of polluted and wetted insulators. Insulat Mater 50(10):201–204
23.
go back to reference Joneidi IA, Kamarposhti MA, Akmal AAS, Mohseni H (2013) Leakage current analysis, FFT calculation and electric field distribution under water droplet on polluted silicon rubber insulator. Electr Eng 95(4):315–323CrossRef Joneidi IA, Kamarposhti MA, Akmal AAS, Mohseni H (2013) Leakage current analysis, FFT calculation and electric field distribution under water droplet on polluted silicon rubber insulator. Electr Eng 95(4):315–323CrossRef
24.
go back to reference Doufene D, Bouazabia S, Bouhaddiche R (2018) Heating dissipation study of a pollution layer on a cap and pin insulator. In: International conference on communications and electrical engineering. Doufene D, Bouazabia S, Bouhaddiche R (2018) Heating dissipation study of a pollution layer on a cap and pin insulator. In: International conference on communications and electrical engineering.
25.
go back to reference Zhang D, Meng F (2019) Research on the interrelation between temperature distribution and dry band on wet contaminated insulators. Energies, vol. 12. Zhang D, Meng F (2019) Research on the interrelation between temperature distribution and dry band on wet contaminated insulators. Energies, vol. 12.
26.
go back to reference Ganga S, Rao BN, Dwarkanath K (2002) Studies on electric field enhancement due to presence of conductingparticle on an insulating spacer as related to GIS. In: Conference record of the IEEE international symposium on electrical insulation, 2002. Ganga S, Rao BN, Dwarkanath K (2002) Studies on electric field enhancement due to presence of conductingparticle on an insulating spacer as related to GIS. In: Conference record of the IEEE international symposium on electrical insulation, 2002.
27.
go back to reference Hinde DD, Birtwhistle D (2008) Water drop to metal and water drop to water drop corona discharges. In: International conference on gas discharges & their applications, 2008. Hinde DD, Birtwhistle D (2008) Water drop to metal and water drop to water drop corona discharges. In: International conference on gas discharges & their applications, 2008.
28.
go back to reference Wang D, Ruan J, Du Z, Ruan X, Liu S (2011) Parallel numerical computing of electrostatic field model of conductors with floating potentials. Zhongguo Dianji Gongcheng Xuebao/Proc Chin Soc Electr Eng 31(6):131–136 Wang D, Ruan J, Du Z, Ruan X, Liu S (2011) Parallel numerical computing of electrostatic field model of conductors with floating potentials. Zhongguo Dianji Gongcheng Xuebao/Proc Chin Soc Electr Eng 31(6):131–136
29.
go back to reference Xu ZN, Lü F, Li HM (2010) Influence of separated globules on post insulator electric field distribution. High Voltage Eng 36(9):2278–2284 Xu ZN, Lü F, Li HM (2010) Influence of separated globules on post insulator electric field distribution. High Voltage Eng 36(9):2278–2284
30.
go back to reference Lan L, Mu L, Wang Y, Wang W, Fu ZX, Wen XS (2020) Study on dry band discharge of wet polluted surface with float potential metal by electro-thermal synchronous observation. IET Sci Meas Technol 14(9):789–796CrossRef Lan L, Mu L, Wang Y, Wang W, Fu ZX, Wen XS (2020) Study on dry band discharge of wet polluted surface with float potential metal by electro-thermal synchronous observation. IET Sci Meas Technol 14(9):789–796CrossRef
31.
go back to reference Chen S, Zhu F et al (2017) Simulation analysis of overhead transmission line insulator string’s thermal field. Electric Switchgea 55(6):76–79. Chen S, Zhu F et al (2017) Simulation analysis of overhead transmission line insulator string’s thermal field. Electric Switchgea 55(6):76–79.
32.
go back to reference Wang Y, Fang C et al (2021) Analysis of typical pollution temperature field and stress field under different distribution characteristics of pulsed laser. Appl Laser 41(6): 1293–1300. Wang Y, Fang C et al (2021) Analysis of typical pollution temperature field and stress field under different distribution characteristics of pulsed laser. Appl Laser 41(6): 1293–1300.
33.
go back to reference Ali B, Dinesh S, Rahul P (2021) Thermo-mechanical Coupled Analysis-Based Design of Ventilated Brake Disc Using Genetic Algorithm and Particle Swarm Optimization. SAE Int J Passenger Cars Mech Syst 14(2). Ali B, Dinesh S, Rahul P (2021) Thermo-mechanical Coupled Analysis-Based Design of Ventilated Brake Disc Using Genetic Algorithm and Particle Swarm Optimization. SAE Int J Passenger Cars Mech Syst 14(2).
34.
go back to reference Elissa ER, Aurélie D, Patrick S, Kumar CH, Alexis M (2021) On the potential of the particle swarm algorithm for the optimization of detailed kinetic mechanisms. Comparison with the Genetic Algorithm. J Phys Chem A 125(23):5180–5189CrossRef Elissa ER, Aurélie D, Patrick S, Kumar CH, Alexis M (2021) On the potential of the particle swarm algorithm for the optimization of detailed kinetic mechanisms. Comparison with the Genetic Algorithm. J Phys Chem A 125(23):5180–5189CrossRef
35.
go back to reference Jagriti S, Maitreyee D, Gonçalo M (2021) Fuzzy inference system tree with particle swarm optimization and genetic algorithm: a novel approach for PM10 forecasting. Expert Syst Appl, 183. Jagriti S, Maitreyee D, Gonçalo M (2021) Fuzzy inference system tree with particle swarm optimization and genetic algorithm: a novel approach for PM10 forecasting. Expert Syst Appl, 183.
36.
go back to reference Sima WX, Shi J, Yuan T et al (2012) Electric field calculation of ultra high voltage composite insulator and optimization design of corona ring structure based on neural network and genetic algorithm. Gaodianya Jishu/High Voltage Eng 38(2):257–265. Sima WX, Shi J, Yuan T et al (2012) Electric field calculation of ultra high voltage composite insulator and optimization design of corona ring structure based on neural network and genetic algorithm. Gaodianya Jishu/High Voltage Eng 38(2):257–265.
37.
go back to reference Sima WX, Yang Q, Sun CX, Jayaram SH, Cherney EA (2005) optimization of corona ring design for ehv composite insulator using finite element and neural network method. Proc CSEE 25(17):115–120 Sima WX, Yang Q, Sun CX, Jayaram SH, Cherney EA (2005) optimization of corona ring design for ehv composite insulator using finite element and neural network method. Proc CSEE 25(17):115–120
38.
go back to reference Hampton BF (2010) Flashover mechanism of polluted insulation. Proc Ind Electr Eng 111(5):985–990CrossRef Hampton BF (2010) Flashover mechanism of polluted insulation. Proc Ind Electr Eng 111(5):985–990CrossRef
39.
go back to reference Rizk FAM, Kamel SI (1991) Modelling of HVDC wall bushing flashover in nonuniform rain. IEEE Trans Power Delivery 6(4):1650–1662CrossRef Rizk FAM, Kamel SI (1991) Modelling of HVDC wall bushing flashover in nonuniform rain. IEEE Trans Power Delivery 6(4):1650–1662CrossRef
40.
go back to reference Zhicheng G, Renyu Z (1985) Analysis of flashover condition of polluted insulator under DC voltage. In: Annual meeting of lightning arresters for China Electrical Engineering, 1985. Zhicheng G, Renyu Z (1985) Analysis of flashover condition of polluted insulator under DC voltage. In: Annual meeting of lightning arresters for China Electrical Engineering, 1985.
Metadata
Title
Study on formation of dry band on wet polluted surface attached with float potential metal based on distributed parameter optimization simulation
Authors
Lin Mu
Bo Wang
Jinpeng Hao
Ziyi Fang
Yu Wang
Lei Lan
Publication date
26-05-2023
Publisher
Springer Berlin Heidelberg
Published in
Electrical Engineering / Issue 5/2023
Print ISSN: 0948-7921
Electronic ISSN: 1432-0487
DOI
https://doi.org/10.1007/s00202-023-01841-3

Other articles of this Issue 5/2023

Electrical Engineering 5/2023 Go to the issue