Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Tribology Letters
Published in: Tribology Letters 3/2015

01-06-2015 | Original Paper

Study on Surface Asperity Flattening in Cold Quasi-Static Uniaxial Planar Compression by Crystal Plasticity Finite Element Method

Authors: Hejie Li, Zhengyi Jiang, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Dianyao Gong, Jiangtao Han

Published in: Tribology Letters | Issue 3/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In order to study the surface asperity flattening in a quasi-static cold uniaxial planar compression, the experimental results of atomic force microscope and electron backscattered diffraction have been employed in a rate-dependent crystal plasticity model to analyze this process. The simulation results show a good agreement with the experimental results: in this quasi-static deformation process, lubrication can hinder the surface asperity flattening process even under very low deformation rate. However, due to the limitation of the model and some parameters, the simulation results cannot predict all the properties in detail such as S orientation {123} <634>, and the maximum stress in sample compressed without lubrication. In addition, the experimental results show, with an increase in gauged reduction, the development of Taylor factor, and CSL boundaries show certain tendencies. Under the same gauged reduction, friction can increase the Taylor factor and Σ = 7.
previous article Correlation of Contact Angle Hysteresis and Hydrodynamic Lubrication
next article A Solution of Rigid–Perfectly Plastic Deep Spherical Indentation Based on Slip-Line Theory

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Liu, Z.L., You, X.C., Zhuang, Z.: A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper. Int. J. Solids Struct. 45, 3674–3687 (2008)CrossRef
2.
Travis, L., Brown, A., Christopher, A., Tejas, G., Murthy, A.: A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper. Acta Mater. 57, 5491–5500 (2009)CrossRef
3.
Serebrinsky, S.A., Duffo, G.S., Galvele, J.R.: Effect of strain rate on stress corrosion crack velocity difference between intergranular and transgranular cracking. Corros. Sci. 41, 191–195 (1999)CrossRef
4.
Serebrinsky, S.A., Galvele, J.R.: Effect of the strain rate on stress corrosion crack velocities in face-centred cubic alloys. A mechanistic interpretation. Corros. Sci. 46, 591–612 (2004)CrossRef
5.
Wu, C.C., Wang, S.H., Chen, C.Y.: Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel. Scripta Mater. 56, 717–720 (2007)CrossRef
6.
Papakaliatakis, G.E.: Effect of strain rate on crack growth in aluminum alloy 1100-0. Theor. Appl. Fract Mech. 31, 131–139 (1999)CrossRef
7.
Urcola, J.J., Sellars, C.M.: Effect of changing strain rate on stress–strain behaviour during high temperature deformation. Acta Mater. 35, 2631–2647 (1987)
8.
Takuda, H., Kikuchi, S., Tsukada, T.: Effect of strain rate on deformation behaviour of a Mg–8.5Li–1Zn alloy sheet at room temperature. Mater. Sci. Eng. A 271, 251–256 (1999)CrossRef
9.
Bhattacharyya, A., Rittel, D., Ravichandran, G.: Effect of strain rate on deformation texture in OFHC copper. Scripta Mater. 52, 657–661 (2005)CrossRef
10.
Zhang, B., Shim, V.P.W.: Effect of strain rate on microstructure of polycrystalline oxygen-free high conductivity copper severely deformed at liquid nitrogen temperature. Acta Mater. 58, 6810–6827 (2010)CrossRef
11.
Kodeeswaran, M., Gnanamoorthy, R.: Effect of strain rate on nanocrystalline surface formation in controlled ball impact process in AISI 304 SS. Mater. Lett. 62, 4516–4518 (2008)CrossRef
12.
Eghbali, B.: Effect of strain rate on the microstructural development through continuous dynamic recrystallization in a microalloyed steel. Mater. Sci. Eng. A 527, 3402–3406 (2010)CrossRef
13.
Percy, J.H.: The effect of strain rate on the forming limit diagram for sheet metal. Ann. ClRP 29, 151–152 (1980)CrossRef
14.
Qin, K., Yang, L.M., Hu, S.S.: Mechanism of strain rate effect based on dislocation theory. Chin. Phys. Lett. 26(036103), 1–4 (2009)
15.
Li, H.J., Jiang, Z.Y., Wei, D.B., Han, J.T., Tieu, A.K.: Study on surface asperity flattening during uniaxial planar compression. Wear 271, 1778–1784 (2011)CrossRef
16.
Li, H.J., Jiang, Z.Y., Wei, D.B., Yan, P.J., Tieu, A.K., Han, J.T.: Crystal plasticity finite element modeling of surface asperity flattening during uniaxial planar compression. In: Tribology of Manufacturing Processes, vol. 1, Proceedings of the 4th International Conference on Tribology of Manufacturing Processes (ICTMP2010), Nice, France, 13–15 June 2010
17.
Li, H.J., Jiang, Z.Y., Wei, D.B.: Crystal plasticity finite modelling of 3D surface asperity flattening in uniaxial planar compression. Tribol. Lett. 46, 101–112 (2012)CrossRef
18.
Li, H.J.: A study of surface roughness in the metal forming process. In: Ph.D Thesis, UOW, 2012
19.
20.
21.
22.
Asaro, R.J., Needleman, A.: Texture development and strain hardening in rate dependent polycrystals. Acta Metall. 33, 923–953 (1985)CrossRef
23.
Kalidindi, S.R., Schoenfeld, S.E.: On the prediction of yield surfaces by the crystal plasticity models for FCC polycrystals. Mater. Sci. Eng. A 293, 120–129 (2000)CrossRef
24.
Kalidindi, S.R., Anand, L.: Macroscopic shape change and evolution of crystallographic texture in pre-textured FCC metals. J. Mech. Phys. Solids 42, 459–490 (1994)CrossRef
25.
Kalidindi, S.R., Anand, L.: An approximate procedure for predicting the evolution of crystallographic texture in bulk deformation processing of FCC metals. Int. J. Mech. Sci. 34, 310–312 (1992)CrossRef
26.
Kalidindi, S.R., Bronkhorst, C.A., Anand, L.: Crystallographic texture evolution in bulk deformation processing of FCC metals. J. Mech. Phys. Solids 40, 552–555 (1992)CrossRef
27.
Taylor, G.I.: Plastic strain in metals. J. Inst. Met. 62, 307–324 (1938)
28.
Rosenberg, J.M., Piehler, H.R.: Calculation of the Taylor factor and lattice rotations for bcc metals deforming by pencil glide. Metall. Mater. Trans. B 2, 257–259 (1971)CrossRef
29.
Justinger, H., Hirt, G.: Estimation of grain size and grain orientation influence in micro-forming processes by Taylor factor considerations. J. Mater. Process. Tech. 209, 2111–2121 (2009)CrossRef
30.
Mao, W.M., Yang, P., Cheng, L.: Analysing Principles and Test Techniques of Material Texture. Metallurgical Industry Press, Beijing (2008)
31.
Warrington, D.H.: The coincidence site lattice (CSL) and grain boundary (DSC) dislocations for the hexagonal lattice. J. Phys. Colloq. 36, C4-87–C4-95 (1975)CrossRef
32.
Yang, P.: EBSD Technique and Application. Metallurgical industry press, Beijing (2007)
Metadata
Title
Study on Surface Asperity Flattening in Cold Quasi-Static Uniaxial Planar Compression by Crystal Plasticity Finite Element Method
Authors
Hejie Li
Zhengyi Jiang
Dongbin Wei
Jianzhong Xu
Xiaoming Zhang
Dianyao Gong
Jiangtao Han
Publication date
01-06-2015
Publisher
Springer US
Published in
Tribology Letters / Issue 3/2015
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-015-0519-0

Other articles of this Issue 3/2015

Tribology Letters 3/2015 Go to the issue

Original Paper

Origin of Ultra-Low Friction of Boric Acid: Role of Vapor Adsorption

Original Paper

Wear Behavior of Polyaryletherketones Under Multi-directional Sliding and Fretting Conditions

Original Paper

A Solution of Rigid–Perfectly Plastic Deep Spherical Indentation Based on Slip-Line Theory

Original Paper

In Situ Study of Model Organic Friction Modifiers Using Liquid Cell AFM: Self-Assembly of Octadecylamine

Original Paper

Effect of Surface Grooves on the Static Friction of an Elastic Slider

Original Paper

Core/Shell Structured Solid-Silica/Mesoporous-Silica Microspheres as Novel Abrasives for Chemical Mechanical Polishing

Premium Partners

    Image Credits