Skip to main content
Top
Published in: Journal of Materials Engineering and Performance 3/2019

27-02-2019

Study on Tensile Deformation Behavior of TC21 Titanium Alloy

Authors: Song Zhang, Yilong Liang, Qifan Xia, Meigui Ou

Published in: Journal of Materials Engineering and Performance | Issue 3/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

To investigate the tensile deformation behavior of TC21 titanium alloy wires, the isothermal tensile deformation tests were conducted by a Geeble-1500D simulator in the temperature range of 720-880 °C and strain rates of 0.01-10 s−1. The in situ tensile deformation behavior has been studied by SEM SURPA40. The stress–strain curves indicate that the flow stress has shown an inverse relationship with temperature and a direct relationship with strain rate. The flow stress immediately reached the peak value and, then, gradually decreased due to the dynamic softening induced by dynamic recovery and dynamic recrystallization. According to the hot processing maps, the temperatures ranging from 720 to 760 °C (corresponding to the strain rates of 0.01-0.032 s−1) and 800-840 °C (corresponding to the strain rates of 0.01-0.056 s−1) are suitable for processing. The in situ tensile results reveal that the cracks initiated at the pre-fabricated defects with the concentrated stress and mainly propagated in the transgranular mode.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Z. Wyatt and S. Ankem, The Effect of Metastability on Room Temperature Deformation Behavior of Beta and Alpha Plus Beta Titanium Alloys, J. Mater. Sci., 2010, 45, p 5022–5031CrossRef Z. Wyatt and S. Ankem, The Effect of Metastability on Room Temperature Deformation Behavior of Beta and Alpha Plus Beta Titanium Alloys, J. Mater. Sci., 2010, 45, p 5022–5031CrossRef
2.
go back to reference L.I. Xin, L.U. Shiqiang, W.A.N.G. Kelu, Z.H.A.O. Weigang, and L.I. Zhenxi, Optimizing High Temperature Deformation Thermomechanical Parameters of TC11 Titanium Alloy by Means of Murty Criterion, Acta Metall. Sin., 2007, 12, p 1268–1274 (in Chinese) L.I. Xin, L.U. Shiqiang, W.A.N.G. Kelu, Z.H.A.O. Weigang, and L.I. Zhenxi, Optimizing High Temperature Deformation Thermomechanical Parameters of TC11 Titanium Alloy by Means of Murty Criterion, Acta Metall. Sin., 2007, 12, p 1268–1274 (in Chinese)
3.
go back to reference Q. Henglei, Z. Yongqing, Z. Gang, A kind of high strength and toughness titanium alloy and its processing method, China National Defense Patent., 2003 (in Chinese) Q. Henglei, Z. Yongqing, Z. Gang, A kind of high strength and toughness titanium alloy and its processing method, China National Defense Patent., 2003 (in Chinese)
4.
go back to reference Y.C. Lin, X.Y. Jiang, C.J. Shuai, C.Y. Zhao, and D.G. He, Effects of Initial Microstructures on Hot Tensile Deformation Behaviors and Fracture Characteristics of Ti-6Al-4V Alloy, Mater. Sci. Eng. A, 2018, 711, p 293–302CrossRef Y.C. Lin, X.Y. Jiang, C.J. Shuai, C.Y. Zhao, and D.G. He, Effects of Initial Microstructures on Hot Tensile Deformation Behaviors and Fracture Characteristics of Ti-6Al-4V Alloy, Mater. Sci. Eng. A, 2018, 711, p 293–302CrossRef
5.
go back to reference W.S. Lee, C.F. Lin, T.H. Chen, and H.H. Hwang, Effects of Strain Rate and Temperature on Mechanical Behaviour of Ti-15Mo-5Zr-3Al Alloy, J. Mech. Behav. Biomed. Mater., 2008, 1, p 336–344CrossRef W.S. Lee, C.F. Lin, T.H. Chen, and H.H. Hwang, Effects of Strain Rate and Temperature on Mechanical Behaviour of Ti-15Mo-5Zr-3Al Alloy, J. Mech. Behav. Biomed. Mater., 2008, 1, p 336–344CrossRef
6.
go back to reference Y.-Q. Jiang, Y.C. Lin, X.-Y. Zhang, C. Chen, Q.-W. Wang, and G.-D. Pang, Isothermal Tensile Deformation Behaviors and Fracture Mechanism of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy in β Phase Field, Vacuum., 2018, 156, p 187–197CrossRef Y.-Q. Jiang, Y.C. Lin, X.-Y. Zhang, C. Chen, Q.-W. Wang, and G.-D. Pang, Isothermal Tensile Deformation Behaviors and Fracture Mechanism of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy in β Phase Field, Vacuum., 2018, 156, p 187–197CrossRef
7.
go back to reference Z.H.U. Zhishou, W.A.N.G. Xinnan, G.U. Wei, and C.H.E.N. Minghe, Study on High Temperature Deformation Behaviors of New Type TC21 Titanium Alloy, Mater China, 2009, 28, p 51–55 (in Chinese) Z.H.U. Zhishou, W.A.N.G. Xinnan, G.U. Wei, and C.H.E.N. Minghe, Study on High Temperature Deformation Behaviors of New Type TC21 Titanium Alloy, Mater China, 2009, 28, p 51–55 (in Chinese)
8.
go back to reference F. Feng, W. Zeng, Y. Zhu, Y. Zhao, and Y. Zhou, Hot Deformation Behavior and Processing Map of As-Cast TC21 Alloy, Rare Met. Mater. Eng., 2012, 41, p 251–255 (in Chinese) F. Feng, W. Zeng, Y. Zhu, Y. Zhao, and Y. Zhou, Hot Deformation Behavior and Processing Map of As-Cast TC21 Alloy, Rare Met. Mater. Eng., 2012, 41, p 251–255 (in Chinese)
9.
go back to reference J. Zhao, S. Zhang, M. Cheng, and H. Song, Deformation Behaviors and Microstructure Evolution of TC21 Alloy in Hot Working, Rare Met., 2009, 33, p 153–158 J. Zhao, S. Zhang, M. Cheng, and H. Song, Deformation Behaviors and Microstructure Evolution of TC21 Alloy in Hot Working, Rare Met., 2009, 33, p 153–158
10.
go back to reference Hui Shao and Di Shan, Accordance Between Fracture Toughness and Strength Difference in TC21 Titanium Alloy with Equiaxed Microstructure, Mater. Sci. Eng. A, 2016, 664, p 10–16CrossRef Hui Shao and Di Shan, Accordance Between Fracture Toughness and Strength Difference in TC21 Titanium Alloy with Equiaxed Microstructure, Mater. Sci. Eng. A, 2016, 664, p 10–16CrossRef
11.
go back to reference Liu Changxu and Wu Guoqing, Situ Observations of Structural Transformation in TB5 Titanium Alloy During One Way Tensile Test, J. Beijing Univ. Aeronaut. Astronaut., 2012, 38, p 1474–1477 (in Chinese) Liu Changxu and Wu Guoqing, Situ Observations of Structural Transformation in TB5 Titanium Alloy During One Way Tensile Test, J. Beijing Univ. Aeronaut. Astronaut., 2012, 38, p 1474–1477 (in Chinese)
12.
go back to reference Lu Jue, Yanli Song, Lin Hua, Kailun Zheng, and Dingguo Dai, Thermal Deformation Behavior and Processing Maps of 7075 Aluminum Alloy Sheet Based on Isothermal Uniaxial Tensile Tests, J. Alloys Compd., 2018, 767, p 856–869CrossRef Lu Jue, Yanli Song, Lin Hua, Kailun Zheng, and Dingguo Dai, Thermal Deformation Behavior and Processing Maps of 7075 Aluminum Alloy Sheet Based on Isothermal Uniaxial Tensile Tests, J. Alloys Compd., 2018, 767, p 856–869CrossRef
13.
go back to reference C. Shi, J. Lai, and X.G. Chen, Microstructural Evolution and Dynamic Softening Mechanisms of Al-Zn-Mg-Cu Alloy During Hot Compressive Deformation, Materials, 2014, 7, p 855–862CrossRef C. Shi, J. Lai, and X.G. Chen, Microstructural Evolution and Dynamic Softening Mechanisms of Al-Zn-Mg-Cu Alloy During Hot Compressive Deformation, Materials, 2014, 7, p 855–862CrossRef
14.
go back to reference L. Feng, Q.U. Heng-Lei, Y.Q. Zhao, L.I. Hui, and Y.N. Zhang, High Temperature Deformation Behavior of TC21 Alloy, j. Aeronaut. Mater., 2004, 2004(24), p 11–13 (in Chinese) L. Feng, Q.U. Heng-Lei, Y.Q. Zhao, L.I. Hui, and Y.N. Zhang, High Temperature Deformation Behavior of TC21 Alloy, j. Aeronaut. Mater., 2004, 2004(24), p 11–13 (in Chinese)
15.
go back to reference K.P. Rao and Y.V.R.K. Prasad, High Temperature Deformation Kinetics of Al-4Mg Alloy, J. Mech. Sci. Technol., 1986, 13, p 83–89 K.P. Rao and Y.V.R.K. Prasad, High Temperature Deformation Kinetics of Al-4Mg Alloy, J. Mech. Sci. Technol., 1986, 13, p 83–89
16.
go back to reference H. Shi, A.J. Mclaren, and C.M. Swllars, Constitutive Equations for High Temperature Flow Stress of Aluminum Alloys, Mater. Sci. Eng. A., 1997, 13, p 210–216 H. Shi, A.J. Mclaren, and C.M. Swllars, Constitutive Equations for High Temperature Flow Stress of Aluminum Alloys, Mater. Sci. Eng. A., 1997, 13, p 210–216
17.
go back to reference C.M. Sellars and W.J. Mctegart, On the Mechnism of Hot Deformation, Acta Metall. Sin., 1966, 14, p 1136CrossRef C.M. Sellars and W.J. Mctegart, On the Mechnism of Hot Deformation, Acta Metall. Sin., 1966, 14, p 1136CrossRef
18.
go back to reference J. Luo, M. Li, W. Yu, and H. Li, The Variation of Strain Rate Sensitivity Exponent and Strain Hardening Exponent in Isothermal Compression of Ti-6Al-4V Alloy, Mater. Des., 2010, 31, p 741–748CrossRef J. Luo, M. Li, W. Yu, and H. Li, The Variation of Strain Rate Sensitivity Exponent and Strain Hardening Exponent in Isothermal Compression of Ti-6Al-4V Alloy, Mater. Des., 2010, 31, p 741–748CrossRef
19.
go back to reference J.X. Liu, Y.L. Lu, X.K. Li, Z.J. Li, and X.T. Zhou, Constitutive Equation of Hot Tensile Deformation for C276 Super Alloy, J. Plast. Eng., 2012, 19, p 11–15 (in Chinese) J.X. Liu, Y.L. Lu, X.K. Li, Z.J. Li, and X.T. Zhou, Constitutive Equation of Hot Tensile Deformation for C276 Super Alloy, J. Plast. Eng., 2012, 19, p 11–15 (in Chinese)
20.
go back to reference Y.V.R.K. Prasad, D.H. Sastry, and S.C. Deevi, Processing Maps for Hot Working of a P/M Iron Aluminide Alloy, Intermetallics, 2008, 10, p 1067–1074 Y.V.R.K. Prasad, D.H. Sastry, and S.C. Deevi, Processing Maps for Hot Working of a P/M Iron Aluminide Alloy, Intermetallics, 2008, 10, p 1067–1074
21.
go back to reference Y.C. Lin, L. Li, D.G. He, M.S. Chen, and G.Q. Liu, Effects of Pre-treatments on Mechanical Properties and Fracture Mechanism of a Nickel-Based Superalloy, Mater. Sci. Eng. A, 2017, 679, p 401–409CrossRef Y.C. Lin, L. Li, D.G. He, M.S. Chen, and G.Q. Liu, Effects of Pre-treatments on Mechanical Properties and Fracture Mechanism of a Nickel-Based Superalloy, Mater. Sci. Eng. A, 2017, 679, p 401–409CrossRef
22.
go back to reference K. Chen, S. Pan, Y. Zhu, Y. Cheng, X. Chen, and Z. Wang, In Situ Observations of Crack Propagation in As-Cast Cu-1.5Fe-0.5Co (wt.%) Alloy, Mater. Sci. Eng. A, 2017, 706, p 211–216CrossRef K. Chen, S. Pan, Y. Zhu, Y. Cheng, X. Chen, and Z. Wang, In Situ Observations of Crack Propagation in As-Cast Cu-1.5Fe-0.5Co (wt.%) Alloy, Mater. Sci. Eng. A, 2017, 706, p 211–216CrossRef
23.
go back to reference Peng Meiqi, Cheng Xingwang, Zheng Chao, Yang Kaiwen, and Jin Dan, Effects of Secondary α Phase Width on Dynamic Mechanical Properties and Sensitivity of Adiabatic Shear Banding in Bimodal Microstructures of TC4 Alloy, Rare Met. Mater. Eng., 2017, 46, p 1843–1849 (in Chinese) Peng Meiqi, Cheng Xingwang, Zheng Chao, Yang Kaiwen, and Jin Dan, Effects of Secondary α Phase Width on Dynamic Mechanical Properties and Sensitivity of Adiabatic Shear Banding in Bimodal Microstructures of TC4 Alloy, Rare Met. Mater. Eng., 2017, 46, p 1843–1849 (in Chinese)
24.
go back to reference Guo Ping, Zhao Yongqing, and Zeng Weidong, Fatigue Crack Propagation Rate of Lamellar Microstructure for TC4-DT Titanium Alloy, Rare Met. Mater. Eng., 2016, 45, p 2937–2941 Guo Ping, Zhao Yongqing, and Zeng Weidong, Fatigue Crack Propagation Rate of Lamellar Microstructure for TC4-DT Titanium Alloy, Rare Met. Mater. Eng., 2016, 45, p 2937–2941
25.
go back to reference W.E.I. Song-bo, C.A.I. Qing-wu, T.A.N.G. Di, M.E.N.G. Qiang, and L.I. Zhen, In Situ SEM Study of Dynamic Tensile in Wrought Magnesium Alloy AZ31B Rolling Sheet, J. Plast. Eng., 2009, 16, p 155–160 W.E.I. Song-bo, C.A.I. Qing-wu, T.A.N.G. Di, M.E.N.G. Qiang, and L.I. Zhen, In Situ SEM Study of Dynamic Tensile in Wrought Magnesium Alloy AZ31B Rolling Sheet, J. Plast. Eng., 2009, 16, p 155–160
Metadata
Title
Study on Tensile Deformation Behavior of TC21 Titanium Alloy
Authors
Song Zhang
Yilong Liang
Qifan Xia
Meigui Ou
Publication date
27-02-2019
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 3/2019
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-019-03901-x

Other articles of this Issue 3/2019

Journal of Materials Engineering and Performance 3/2019 Go to the issue

Premium Partners