Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Materials Engineering and Performance
Published in: Journal of Materials Engineering and Performance 11/2022

11-05-2022 | Technical Article

Tensile Property and Failure Behavior of Copper/Aluminum Dissimilar Friction Stir Welding at Elevated Temperatures

Authors: Tra Tran Hung, Hao Duong Dinh, Okazaki Masakazu, Thang Do Quang, Khanh Dang Quoc, Nam Quach Hoai

Published in: Journal of Materials Engineering and Performance | Issue 11/2022

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The tensile properties and failure behavior of a dissimilar Cu/Al joint are investigated at elevated temperatures. The strength degradation induced by test temperatures in the stirred zone is comparable to that in the base metal (on the aluminum 1050 side). The highest temperature-induced strength loss occurs in the softened zone adjacent to the stirred zone (on the aluminum side). The joint ductility is not significantly affected by the test temperatures. The strength degradation rate in the welded zone and the base metal increase proportionally to the test temperatures; however, the rate in the welded zone is higher. The failure behavior of the dissimilar joint is affected insignificantly by the test temperatures.
previous article Microstructure and Wear Behavior of Self-Lubricating Microwave Clads Deposited on Titanium Alloy
next article Insight into the Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Mg Alloys from the Microstructures in PEO Coatings

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
J.A. Sanguesa, V. Torres-Sanz, P. Garrido, F.J. Martinez and J.M. Marquez-Barja, A Review on Electric Vehicles: Technologies and Challenges, Smart Cities., 2021, 4, p 372–404.CrossRef
2.
P.B. Jean, P. Franziska, S. Renè and S. Stefan, Solid-state Welding of Aluminium to Copper-Case Studies, Weld World., 2013, 57, p 541–550.CrossRef
3.
C.W. Tan, Z.G. Jiang, L.Q. Li, Y.B. Chen and X.Y. Chen, Microstructural Evolution and Mechanical Properties of Dissimilar Al-Cu Joints Produced by Friction Stir Welding, Mater. Des., 2013, 51, p 466–473.CrossRef
4.
P.K. Sahu, S. Pal, S.K. Pal and J. Rahul, Influence of Plate Position, Tool Offset and Tool Rotational Speed on Mechanical Properties and Microstructures of Dissimilar Al/Cu Friction Stir Welding Joints, J. Mater. Process. Technol., 2016, 235, p 55–67.CrossRef
5.
W. Hou, L.H.A. Shah, G. Huang, Y. Shen and A. Gerlich, The Role of Tool Offset on the Microstructure and Mechanical Properties of Al/Cu Friction Stir Welded Joints, J. Alloys. Compd., 2020, 825, 154045.CrossRef
6.
D.K. Yaduwanshi, S. Bag and S. Pal, On the Effect of Tool Offset in Hybrid-FSW of Copper-Aluminium Alloy, Mate.r Manuf. Process, 2018, 33(3), p 277–287.CrossRef
7.
E.N. Ryl’kov, F.Y. Isupov, A.A. Naumov, O.V. Panchenko and A.I. Shamshurin, Microstructure and Mechanical Properties of Dissimilar Al–Cu Joints Formed by Friction Stir Welding, Met. Sci. Heat Treat, 2019, 60, p 734–738.CrossRef
8.
P. Xue, D.R. Ni, D. Wang, B.L. Xiao and Z.Y. Ma, Effect of Friction Stir Welding Parameters on the Microstructure and Mechanical Properties of the Dissimilar Al–Cu Joints, Mater. Sci. Eng. A., 2011, 528(13–14), p 4683–4689.CrossRef
9.
Q. Zhang, W. Gong and W. Liu, Microstructure and Mechanical Properties of Dissimilar Al−Cu Joints by Friction Stir Welding, Trans. Nonferrous Met. Soc. China., 2015, 25(6), p 1779–1786.CrossRef
10.
S. Shankar, P. Vilaça, P. Dash, S. Chattopadhyaya and S. Hloch, Joint Strength Evaluation of Friction Stir Welded Al-Cu Dissimilar Alloys, Measurement, 2019, 146, p 892–902.CrossRef
11.
F.B. Argesi, A. Shamsipur and S.E. Mirsalehi, Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding, Acta Metall Sin (Engl. Lett.), 2018, 31, p 1183–1196.CrossRef
12.
R. Anbukkarasi and S.V. Kailas, Influences of Shape of the new Interfaces and Morphology of the Intermetallics on Mechanical Properties of Aluminium AA2024–Pure Copper Joints by Friction Stir Welding, Int. J. Adv. Manuf. Technol., 2020, 106, p 5071–5083.CrossRef
13.
S. Celik and R. Cakir, Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint, Metals, 2016, 6(6), p 133.CrossRef
14.
M. Girard, B. Huneau, C. Genevois, X. Sauvage and G. Racineux, Friction Stir Diffusion Bonding of Dissimilar Metals, Sci. Technol. Weld., 2010, 15(8), p 661–665.CrossRef
15.
P. Xue, B.L. Xiao, D.R. Ni and Z.Y. Ma, Enhanced Mechanical Properties of Friction Stir Welded Dissimilar Al–Cu Joint by Intermetallic Compounds, Mater. Sci. Eng. A., 2010, 527(21–22), p 5723–5727.CrossRef
16.
J. Galvão, C. Oliveira, A. Loureiro and D.M. Rodrigues, Formation and Distribution of Brittle Structures in Friction Stir Welding of Aluminium and Copper: Influence of Shoulder Geometry, Intermetallics, 2012, 22, p 122–128.CrossRef
17.
R. Marstatt, M. Krutzlinger, J. Luderschmid, M.F. Zaeh and F. Haider, Formation of a Diffusion-Based Intermetallic Interface Layer in Friction Stir Welded Dissimilar Al-Cu lap Joints, IOP Conf Ser. Mater. Sci. Eng., 2017, 181, 012002.CrossRef
18.
19.
M.K. GharahShiran, G. Khalaj, H. Pouraliakbar, M.R. Jandaghi, A.S. Dehnavi and H. Bakhtiari, Multilayer Cu/Al/Cu Explosive Welded Joints: Characterizing Heat Treatment Effect on the Interface Microstructure and Mechanical Properties, J. Manuf. Proc., 2018, 35, p 657–663.CrossRef
20.
21.
M.M. Hoseini Athar and B. Tolaminejad, Weldability Window and the Effect of Interface Morphology on the Properties of Al/Cu/Al Laminated Composites Fabricated by Explosive Welding, Mater. Des., 2015, 86(5), p 516–525.CrossRef
22.
M.R. Azad, A. Ghasemi, H. Pouraliakbar and M.R. Jandagh, On the Al/Cu Dissimilar Joints Produced Through Simple Cold Compression, Trans. Indian Inst. Met., 2015, 68(5), p 991–998.CrossRef
23.
B. He, L. Cui, D. Wang, Y. Liu, C. Liu and H. Li, The Metallurgical Bonding and High Temperature Tensile Behaviors of 9Cr-1W Steel And 316L Steel Dissimilar Joint by Friction Stir Welding, J. Manuf. Process., 2019, 44, p 241–251.CrossRef
24.
Y.L. Tang, X. Ye, L.C. Ding, P.L. Zhang, Yu. Zhi Shui, S.L. Yang, Wu. Di and Fu. Kui Jun, High-Temperature Tensile Properties and Interface Structure of Ni–Fe Dissimilar Butt Joints Welded Using the Cold Metal Transfer Process, J. Mater. Res. Technol., 2020, 9(6), p 15023–15033.CrossRef
25.
T.H. Tra and M. Okazaki, Creep-Fatigue Cracking Near the Welded Interface in Friction Welding Dissimilar Superalloys INCONEL 718 and MAR-M247, Metall. Mater. Trans. A, 2017, 48, p 3692–3701.CrossRef
26.
M.L. Zhu and F.Z. Xuan, Effects of Temperature on Tensile and Impact Behavior of Dissimilar Welds of Rotor Steels, Mater. Des., 2010, 31, p 3346–3352.CrossRef
27.
M. Sakaguchi, A. Sano, T.H. Tra, M. Okazaki and M. Sekihara, Low Cycle and Thermal-Mechanical Fatigue of Friction Welded Dissimilar Superalloys Joint, J. Solid Mech. Mater. Eng., 2008, 2(12), p 1508–1516.CrossRef
28.
Annual Book of ASTM Standards. Test Methods for Tension Testing of Metallic Materials, E08, ASTM International. 2004.
29.
Annual Book of ASTM Standards. Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials, E21, ASTM International. 2004.
30.
ASM handbook. Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. 1992.
31.
Metadata
Title
Tensile Property and Failure Behavior of Copper/Aluminum Dissimilar Friction Stir Welding at Elevated Temperatures
Authors
Tra Tran Hung
Hao Duong Dinh
Okazaki Masakazu
Thang Do Quang
Khanh Dang Quoc
Nam Quach Hoai
Publication date
11-05-2022
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 11/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-022-06949-4

Other articles of this Issue 11/2022

Journal of Materials Engineering and Performance 11/2022 Go to the issue

Technical Article

Long-Term Creep Behavior of a CoCrFeNi Medium-Entropy Alloy

Technical Article

Experimental Research on Preparation and Grinding Surface Quality of Coated Micro-Grinding Tools

Technical Article

Microstructure and Mechanical Properties of ER70S-6 Alloy Cladding on Aluminum Using a Cold Metal Transfer Process

Technical Article

Processing Quality Inspection of Additive-Manufactured Microspiral Inductors Based on Micro-Computed Tomography Data

Technical Article

Influence of Microstructure and Passive Film on the Corrosion Behavior of CoCrFeMnNi High-Entropy Alloy Prepared by Different Cooling Methods in a Simulated Alkaline Soil Solution

Technical Article

An Investigation of the Role of Calcium in the Microstructure of Mg-5Al-4Sn-Based Alloys and Pitting Corrosion Resistance

Premium Partners

    Image Credits