Skip to main content
Top

2025 | OriginalPaper | Chapter

The Importance of Rock Mass Characterization for Rock Socketed Foundations

Authors : Vasantha Wijeyakulasuriya, Siva Sivakumar, Ajith Dissanayake

Published in: Recent Advances and Innovative Developments in Transportation Geotechnics

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Rock mechanics investigations undertaken by the Department of Transport and Main Roads (TMR) in Queensland, Australia, as part of the pre-tender information for the Second Gateway Bridge (Duplication) have been revisited. In addition to the conventional rock substance characterization, this investigation included rock direct shear tests (CNS and CNL) and a significant number of rock pressuremeter testing to provide specialist rock mechanics information for the design of rock socketed foundations. This paper is focused on the major rock lithology intercepted, i.e., sandstone. Sandstone in the Sydney basin has been widely researched, and the findings from this study are compared with the published information on the Sydney Sandstone as well as from other sources. Findings published by the Second Gateway Bridge Designers are used for comparison where relevant, especially on the test piles which can serve as a useful reference.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Day R, Johnston I, Yang D (2014) Design of foundations to second gateway bridge—Brisbane. In: Proceedings of the 7th AustRoads bridge conference, Adelaide Day R, Johnston I, Yang D (2014) Design of foundations to second gateway bridge—Brisbane. In: Proceedings of the 7th AustRoads bridge conference, Adelaide
2.
go back to reference Williams DJ (1989) Geotechnical input to major bridge project. ASCE J Geotech Eng 115(3):322–339CrossRef Williams DJ (1989) Geotechnical input to major bridge project. ASCE J Geotech Eng 115(3):322–339CrossRef
3.
go back to reference Willmott W, Stevens N (2012) Rocks and landscapes of Brisbane and Ipswich, 2nd edn. Geological Society of Australia, QLD Division Willmott W, Stevens N (2012) Rocks and landscapes of Brisbane and Ipswich, 2nd edn. Geological Society of Australia, QLD Division
4.
go back to reference Pells PJN (2004) Substance and mass properties for the design of engineering structures in the Hawkesbury Sandstone. Aust Geomech 39(3):1–21 Pells PJN (2004) Substance and mass properties for the design of engineering structures in the Hawkesbury Sandstone. Aust Geomech 39(3):1–21
5.
go back to reference Hencher S (2015) Practical rock mechanics. CRC Press Hencher S (2015) Practical rock mechanics. CRC Press
6.
go back to reference Siedel JP, Collingwood B (2001) A new socket roughness factor for prediction of rock socket shaft resistance. Can Geotech J 38:138–153CrossRef Siedel JP, Collingwood B (2001) A new socket roughness factor for prediction of rock socket shaft resistance. Can Geotech J 38:138–153CrossRef
7.
go back to reference Ching J, Li K-H, Phoon K-K, Weng M-C (2018) Generic transformation models for some intact rock properties. Can Geotech J 55(12):1702–1741CrossRef Ching J, Li K-H, Phoon K-K, Weng M-C (2018) Generic transformation models for some intact rock properties. Can Geotech J 55(12):1702–1741CrossRef
8.
go back to reference Hoek E, Diederichs MS (2006) Empirical estimation of rock mass modulus. Int J Rock Mech Min Sci 43:203–215CrossRef Hoek E, Diederichs MS (2006) Empirical estimation of rock mass modulus. Int J Rock Mech Min Sci 43:203–215CrossRef
9.
go back to reference Fenton GA, Griffiths DV (2008) Risk assessment in geotechnical engineering. Wiley Fenton GA, Griffiths DV (2008) Risk assessment in geotechnical engineering. Wiley
10.
go back to reference Rowe RK, Armitage HH (1987) A design method for drilled piers in soft rock. Can Geotech J 24(1):126–142CrossRef Rowe RK, Armitage HH (1987) A design method for drilled piers in soft rock. Can Geotech J 24(1):126–142CrossRef
11.
go back to reference Johnston IW, Lam TSK, Williams AF (1987) Constant normal stiffness direct shear test for socketed pile design in weak rock. Geotechnique 37(1):83–89CrossRef Johnston IW, Lam TSK, Williams AF (1987) Constant normal stiffness direct shear test for socketed pile design in weak rock. Geotechnique 37(1):83–89CrossRef
12.
go back to reference Hughes J, Whittle W (2022) High resolution pressuremeters and geotechnical engineering: the measurement of small things. CRC Press Hughes J, Whittle W (2022) High resolution pressuremeters and geotechnical engineering: the measurement of small things. CRC Press
13.
14.
go back to reference Turner J (2006) NCHRP synthesis 360: rock-socketed shafts for highway structure foundations. TRB, Washington, DC Turner J (2006) NCHRP synthesis 360: rock-socketed shafts for highway structure foundations. TRB, Washington, DC
15.
go back to reference Pells (1980) An experimental investigation into side shear for socketed piles in sandstone. In: Proceedings of the international conference on structural foundations on rock, Sydney Pells (1980) An experimental investigation into side shear for socketed piles in sandstone. In: Proceedings of the international conference on structural foundations on rock, Sydney
16.
go back to reference Gu XF, Seidel JP, Haberfield CM (2003) Direct shear test of sandstone-concrete joints. Int J Geomech 3(1):21–33CrossRef Gu XF, Seidel JP, Haberfield CM (2003) Direct shear test of sandstone-concrete joints. Int J Geomech 3(1):21–33CrossRef
17.
go back to reference Johnston IW (2022) Evaluation of design methods for side-resistance-only rock-socketed piles. Can Geotech J 59:601–613CrossRef Johnston IW (2022) Evaluation of design methods for side-resistance-only rock-socketed piles. Can Geotech J 59:601–613CrossRef
18.
go back to reference Carter JP, Kulhawy FH (1988) Analysis and design of drilled shaft foundations socketed into rock. Report EL-5918. Electric Power Research Institute, Palo Alto, CA Carter JP, Kulhawy FH (1988) Analysis and design of drilled shaft foundations socketed into rock. Report EL-5918. Electric Power Research Institute, Palo Alto, CA
19.
go back to reference Kulhawy FH, Prakoso WA, Akbas SO (2005) Evaluation of capacity of rock foundation sockets. In: Proceedings of the 40th U.S. rock mechanics symposium, Anchorage, Alaska Kulhawy FH, Prakoso WA, Akbas SO (2005) Evaluation of capacity of rock foundation sockets. In: Proceedings of the 40th U.S. rock mechanics symposium, Anchorage, Alaska
20.
go back to reference Zhang I, Einstein H (1998) End bearing capacity of drilled shafts in rock. J Geotech Eng ASCE 124(7):574–584 Zhang I, Einstein H (1998) End bearing capacity of drilled shafts in rock. J Geotech Eng ASCE 124(7):574–584
21.
go back to reference Small JC (2016) Geomechanics in soil, rock, and environmental engineering. CRC Press Small JC (2016) Geomechanics in soil, rock, and environmental engineering. CRC Press
22.
go back to reference Look B, Lacey D (2013) Characteristic values in rock socket design. In: Proceedings of the 18th international conference on soil mechanics and geotechnical engineering, Paris Look B, Lacey D (2013) Characteristic values in rock socket design. In: Proceedings of the 18th international conference on soil mechanics and geotechnical engineering, Paris
23.
go back to reference Haberfield CM, Lochaden ALE (2019) Analysis and design of axially loaded piles in rock. J Rock Mech and Geotech Eng 11:535–548 Haberfield CM, Lochaden ALE (2019) Analysis and design of axially loaded piles in rock. J Rock Mech and Geotech Eng 11:535–548
24.
go back to reference Poulos HG (2017) Tall building foundation design. CRC Press Poulos HG (2017) Tall building foundation design. CRC Press
Metadata
Title
The Importance of Rock Mass Characterization for Rock Socketed Foundations
Authors
Vasantha Wijeyakulasuriya
Siva Sivakumar
Ajith Dissanayake
Copyright Year
2025
Publisher
Springer Nature Singapore
DOI
https://doi.org/10.1007/978-981-97-8245-1_5