Skip to main content
main-content
Top

Journal

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2016

Issue 1-4/2016

Table of Contents ( 60 Articles )

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

An investigation on high-efficiency profile grinding of directional solidified nickel-based superalloys DZ125 with electroplated CBN wheel

Zhengcai Zhao, Yucan Fu, Jiuhua Xu, Zhiwei Zhang, Zhiwu Liu, Jian He

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

A non-contact method for part-based process performance monitoring in end milling operations

Hadi Fekrmandi, Muhammad Unal, Amin Baghalian, Shervin Tashakori, Kathleen Oyola, Abdullah Alsenawi, Ibrahim Nur Tansel

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Seam tracking based on Kalman filtering of micro-gap weld using magneto-optical image

Xiangdong Gao, Ling Mo, Zhenlin Xiao, Xiaohui Chen, Seiji Katayama

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Feature selection for surface defect classification of extruded aluminum profiles

Apostolos Chondronasios, Ivan Popov, Ivan Jordanov

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

An improved FMECA for feed system of CNC machining center based on ICR and DEMATEL method

Xiaofeng Wang, Yingzhi Zhang, Guixiang Shen

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Chip formation and its effects on cutting force, tool temperature, tool stress, and cutting edge wear in high- and ultra-high-speed milling

Xiaobin Cui, Bo Zhao, Feng Jiao, Jianxin Zheng

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Research on the ovality of hollow shafts in cross wedge rolling with mandrel

Cuiping Yang, Zhenghuan Hu

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Study of influence of traverse speed and abrasive mass flowrate in abrasive water jet machining of gemstones

Carlos Edmundo de Abreu e Lima, Rodrigo Lebrón, André João de Souza, Ney Francisco Ferreira, Patric Daniel Neis

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Modeling and experimental analysis of fiber laser offset welding of Al-Ti butt joints

Giuseppe Casalino, Michelangelo Mortello

19-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

A weighted assembly precedence graph for assembly sequence planning

Yong Wang, De Tian

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Simulation-based thermal investigation of the cutting tool in the environment of single-phase fluxes

Matthias Putz, Volker Wittstock, Ulrich Semmler, Michael Bräunig

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Surface nanocrystallization and its effect on fatigue performance of high-strength materials treated by ultrasonic rolling process

Cheng Minglong, Zhang Deyuan, Chen Huawei, Qin Wei, Li Jinsheng

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Relationships of tool wear characteristics to cutting mechanics, chip formation, and surface quality in ultra-precision fly cutting

Guoqing Zhang, Suet To, Shaojian Zhang

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Stress distributions during the cross-wedge rolling of composite 42CrMo/Q235 laminated shafts

W. F. Peng, J. H. Zhang, G. X. Huang, W. P. Liu, X. D. Shu, J. Zhu

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

A novel power skiving method using the common shaper cutter

Erkuo Guo, Rongjing Hong, Xiaodiao Huang, Chenggang Fang

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Effects of vibration frequency on microstructure, mechanical properties, and fracture behavior of A356 aluminum alloy obtained by expendable pattern shell casting

Wenming Jiang, Xu Chen, Benjing Wang, Zitian Fan, Hebao Wu

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Investigation of extrusion limit of Incoloy028 alloy tube by combining numerical and analytical methods

C. Y. Sun, D. Liu, M. W. Fu, J. Yang

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Study of small cracks on nanocomposite ceramics cut by WEDM

Chengmao Zhang

21-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

A new approach based on modal mass distribution matrix to identify weak components of machine tool structure

Songping He, Xinyong Mao, Xiangqiu Liu, Bo Luo, Bin Li, Fangyu Peng

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Modeling and simulation of the geometry and forces associated with the helical broaching process

Daniel Amoretti Gonçalves, Rolf Bertrand Schroeter

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

On-line learning of welding bead geometry in industrial robots

Jaime F. Aviles-Viñas, Reyes Rios-Cabrera, Ismael Lopez-Juarez

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Machining metal matrix composites: novel analytical force model

A. Ghandehariun, H. M. Hussein, H. A. Kishawy

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Integrated assembly sequence planning and assembly line balancing with ant colony optimization approach

Cong Lu, Zhuo Yang

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Tool damage and its effect on the machined surface roughness in high-speed face milling the 17-4PH stainless steel

Guoliang Liu, Bin Zou, Chuanzhen Huang, Xiangyu Wang, Jun Wang, Zhanqiang Liu

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Supplier selection and demand allocation under supply disruption risks

Purushottam Lal Meena, Sarada Prasad Sarmah

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Electrochemical machining flow field simulation and experimental verification for irregular vortex paths of a closed integer impeller

L. Tang, F. Yang, Q. L. Zhu, W. M. Gan

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Effect of pulsed Nd:YAG laser re-melting on chromium surface alloyed AA6061-T6 aluminum

Mohammad Ansari, Mahmoud Heydarzadeh Sohi, Reza Soltani, Mohammad Javad Torkamany

22-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Error analysis and compensation of line contact spherical grinding with cup-shaped wheel

Yanglin Peng, Yifan Dai, Ci Song, Shanyong Chen

23-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Simulation of dynamic recrystallization process during friction stir welding of AZ91 magnesium alloy

Parviz Asadi, Mohammad Kazem Besharati Givi, Mostafa Akbari

23-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Extension of flow stress–strain curves of aerospace alloys after necking

M. Saboori, H. Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara

24-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review

Emad Omrani, Afsaneh Dorri Moghadam, Pradeep L. Menezes, Pradeep K. Rohatgi

24-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass

Jianjian Wang, Chenglong Zhang, Pingfa Feng, Jianfu Zhang

24-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Numerical simulation for thermal and RT forming light sheet materials using a new combined model of M–K theory and shear localization criterion

Xian Zheng Lu, Luen Chow Chan

24-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Design and experimental evaluation of a circular saw blade with self-clamped cutting inserts

Wen-Tung Chang, Li-Cheng Chen

24-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Hydroforming simulation and experiment of clad T-shapes

Xunzhong Guo, Zhongli Liu, Hui Wang, Liuan Wang, Fuye Ma, Xianjun Sun, Jie Tao

24-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016 Open Access

Additive manufacturing methods and modelling approaches: a critical review

H. Bikas, P. Stavropoulos, G. Chryssolouris

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

An automated CNC programming approach to machining pocket with complex islands and boundaries by using multiple cutters in hybrid tool path patterns

Min Zhou, Guolei Zheng, Zezhong Chevy Chen

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Semi-active fuzzy control of machine tool chatter vibration using smart MR dampers

Davood Sajedi Pour, Saeed Behbahani

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Effect of cryogenic conditions on the milling performance of aramid fiber

Fengbiao Wang, Yongqing Wang, Bo Hou, Jinbao Zhang, Yapeng Li

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Microstructure and performance of monolayer brazed grinding wheel with polycrystalline diamond grains

Pu Meng

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Production control policies for a multistage serial system under MTO-MTS production environment

Paolo Renna

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Kinematic view of the cutting mechanism of rotary ultrasonic machining by using spiral cutting tools

Yi Wang, Hu Gong, F. Z. Fang, Hao Ni

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Multi-objective optimization of collation delay and makespan in mail-order pharmacy automated distribution system

Kevin Mei, Debiao Li, Sang Won Yoon, Jong-hynn Ryu

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Influence of the machining sequence on the residual stress redistribution and machining quality: analysis and improvement using numerical simulations

X. Cerutti, K. Mocellin

25-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Drilling of film cooling holes by a EDM/ECM in situ combined process using internal and side flushing of tubular electrode

Yan Zhang, Zhengyang Xu, Di Zhu, Ningsong Qu, Yun Zhu

26-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Effects of nanopowder TiO2-mixed dielectric and rotary tool on EDM

Hamid Baseri, Samin Sadeghian

28-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Application of fuzzy axiomatic design principles for selection of non-traditional machining processes

Anant V. Khandekar, Shankar Chakraborty

28-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Multi-response optimization in small scale resistance spot welding of titanium alloy by principal component analysis and genetic algorithm

Xiaodong Wan, Yuanxun Wang, Dawei Zhao

29-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

A real-time surface interpolator methodology for precision CNC machining of swept surfaces

Kevin M. Nittler, Rida T. Farouki

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Engineering change information propagation in aviation industrial manufacturing execution processes

Sheng Leng, Lu Wang, Gang Chen, Dunbing Tang

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Self-induced electrical discharge machining of Ni–Al2O3 functionally graded materials

Hongzheng Liu, Zhenlong Wang, Yukui Wang, Huichao Li

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Formulating CAM parameters for surface patterning by grinding process based on unit pattern geometry

Md. Mofizul Islam, Hochan Kim, Taejo Ko

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Study on the effects of friction stir welding process parameters on the microstructure and mechanical properties of 5086-H34 aluminum welded joints

H. Mohammadzadeh Jamalian, M. Farahani, M. K. Besharati Givi, M. Aghaei Vafaei

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Inventory record inaccuracy due to theft in production-inventory systems

Amir Hassan Zadeh, Ramesh Sharda, Narges Kasiri

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

An exploratory study of virtual cell design for thin-film transistor–liquid crystal display (TFT-LCD) array manufacturing

Taho Yang, Yiyo Kuo, Chiung-Hsi Hsieh, Wei-Cheng Ge

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Titanium wire drawing with longitudinal-torsional composite ultrasonic vibration

Chongqiu Yang, Xiaobiao Shan, Tao Xie

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Practicality and formability of integrally stiffened tube hydro-assisted forming

G. N. Chu, G. Liu, K. Zhang, W. Li

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Precision machining of aspheric surface based on elastic deformation molding method

Zhe Wu, Julong Yuan, Binghai Lyu, Ping Zhao, Wangpiao Lin

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding

Yong Zhao, Sheng Jiang, Shaofeng Yang, Zhengping Lu, Keng Yan

30-07-2015 | ORIGINAL ARTICLE | Issue 1-4/2016

Influence of discharge energy on EDM ablation

Zhidong Liu, Xiangzhi Wang, Zhongli Cao

Current Publications

Premium Partner

    Image Credits