Skip to main content
main-content
Top

Journal

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 5-8/2016

Issue 5-8/2016

Process Planning and Production Scheduling in Sustainable Manufacturing (pp. 1203-1596)

Table of Contents ( 100 Articles )

09-01-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Variable fidelity metamodel-based analytical target cascading method for green design

Jun Zheng, Liang Gao, Haobo Qiu, Xinyu Shao, Ping Jiang

13-03-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Research on eco-balance with LCA and LCC for mechanical product design

Chao Deng, Jun Wu, Xinyu Shao

10-11-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

An approach for blank dimension design considering energy consumption

Yongmao Xiao, Hua Zhang, Zhigang Jiang

17-03-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Machining process parameters optimization for heavy-duty CNC machine tools in sustainable manufacturing

Yao Xiong, Jun Wu, Chao Deng, Yuanhang Wang

10-05-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Modeling and impact factors analyzing of energy consumption in CNC face milling using GRASP gene expression programming

Yang Yang, Xinyu Li, Liang Gao, Xinyu Shao

20-03-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Study on a tolerance grading allocation method under uncertainty and quality oriented for remanufactured parts

Mingzhou Liu, Conghu Liu, Lingling Xing, Fadong Mei, Xi Zhang

16-08-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Predictive modeling of surface roughness in lenses precision turning using regression and support vector machines

Xingsheng Wang, Min Kang, Xiuqing Fu, Chunlin Li

22-08-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

A computer-aided system for sustainability assessment for the die-casting process planning

Prince Pal Singh, Jatinder Madan

24-04-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Optimization of process parameters of green electrical discharge machining using principal component analysis (PCA)

Jagadish, Amitava Ray

27-12-2014 | ORIGINAL ARTICLE | Issue 5-8/2016

Methodological tools for assessing the sustainability index (SI) of industrial production processes

Carlos Alberto Schuch Bork, Janaina Fracaro de Souza, Jefferson de Oliveira Gomes, Vanessa Venancio Pappetti Canhete, Durval João De Barba Jr

01-02-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Fabrication of 3D surface model with environmental materials for architectural modeling by hot cutting system

Wu Xiaojun, Wu Qian, Tong Zhixue, Cai Junyi, Li Hao

09-07-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Selection of a green manufacturing process based on CAD features

Raoudha Gaha, Bernard Yannou, Abdelmajid Benamara

18-01-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Establishment of a thermal damage model for Ti-6Al-2Zr-1Mo-1V titanium alloy and its application in the tube rolling-spinning process

Mei Zhan, Tao Zhang, He Yang, Lijing Li

12-01-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Prediction and optimization of process parameters of green composites in AWJM process using response surface methodology

Jagadish, Sumit Bhowmik, Amitava Ray

10-06-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)

Salman Pervaiz, Amir Rashid, Ibrahim Deiab, Cornel Mihai Nicolescu

14-03-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Dynamic rescheduling in FMS that is simultaneously considering energy consumption and schedule efficiency

Liping Zhang, Xinyu Li, Liang Gao, Guohui Zhang

22-03-2013 | Original Article | Issue 5-8/2016

A memory-based complete local search method with variable neighborhood structures for no-wait job shops

Xiaoping Li, Haiyan Xu, Minmin Li

10-02-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Layout adjustment of cellular production line based on material logistic analysis

Chen Huawei, Liu Guoping, Tu Haining, Wang Aimin, Ning Ruxin

16-04-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Collaborative manufacturing of aircraft structural parts based on machining features and software agents

Wangwei Chu, Yingguang Li, Changqing Liu, Wenping Mou, Limin Tang

27-06-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Evaluating sustainable advantages in productivity with a systematic procedure

Toly Chen, Yu-Cheng Wang

27-02-2014 | ORIGINAL ARTICLE | Issue 5-8/2016

Improvement of particle classification using particle expert system in automotive production

Phan Quoc Bao, Sung-Lim Ko

16-08-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

A decision-making approach for end-of-life strategies selection of used parts

Xugang Zhang, Hua Zhang, Zhigang Jiang, Yanhong Wang

12-06-2014 | ORIGINAL ARTICLE | Issue 5-8/2016

Analysis of the relationship of crack arrest effects with fusion zone size by current detour and Joule heating

Jing Yu, Hongchao Zhang, Dewei Deng, Qianqian Liu, Shengzhi Hao

25-11-2014 | ORIGINAL ARTICLE | Issue 5-8/2016

A resilient global supplier selection strategy—a case study of an automotive company

Amy Chen, Chih-Ying Hsieh, H. M. Wee

16-09-2014 | ORIGINAL ARTICLE | Issue 5-8/2016

Servitization of manufacturing industries based on cloud-based business model and the down-to-earth implementary path

Xianhe Wen, Xiaojun Zhou

09-05-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Assessment of operational feasibility of waste vegetable oil based bio-dielectric fluid for sustainable electric discharge machining (EDM)

Janak B. Valaki, Pravin P. Rathod

03-05-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Pressure-sensitive fasteners for active disassembly

Jef R. Peeters, Wannes Van den Bossche, Tom Devoldere, Paul Vanegas, Wim Dewulf, Joost R. Duflou

25-11-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Two-echelon supply chain coordination among manufacturer and duopolies retailers with recycling facility

Nikunja Mohan Modak, Shibaji Panda, Shib Sankar Sana

26-09-2013 | ORIGINAL ARTICLE | Issue 5-8/2016

Simulation and experiment for crack arrest in remanufacturing

Jing Yu, Hong Chao Zhang, Dewei Deng, Asif Iqbal, Sheng Zhi Hao

03-04-2015 | ORIGINAL ARTICLE | Issue 5-8/2016

Energy consumption model and its simulation for manufacturing and remanufacturing systems

Xianlin Wang, Wei Luo, Hua Zhang, Binbin Dan, Fei Li

02-05-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A holistic framework for evaluation and selection of remanufacturing operations: an approach

John Mbogo Kafuku, Muhamad Zameri Mat Saman, Sha’ri Mohd Yusof, Salwa Mahmood

23-07-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A mathematical model for designing reconfigurable cellular hybrid manufacturing-remanufacturing systems

Tariq Aljuneidi, Akif Asil Bulgak

09-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Tolerance analysis and allocation of special machine tool for manufacturing globoidal cams

Yueming Zhang, Shuting Ji, Jing Zhao, Lijun Xiang

09-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Experimental investigation on performance of different tool movement strategies in EDM process for boring operation

Sudhanshu Kumar, Harshit K. Dave, Keyur P. Desai

09-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Joint optimization of lot-sizing and maintenance policy for a partially observable two-unit system

Leila Jafari, Viliam Makis

09-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Effect of temporally modulated pulse on reducing recast layer in laser drilling

Wenqiang Duan, Xia Dong, Kedian Wang, Zhengjie Fan, Xuesong Mei, Wenjun Wang, Jing Lv

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Predictive model of milling force for complex profile milling

Xiang Su, Gang Wang, Jianchao Yu, Feng Jiang, Jianfeng Li, Yiming Rong

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Modification of wettability property of titanium by laser texturing

Cheng-juan Yang, Xue-song Mei, Yan-ling Tian, Da-wei Zhang, Yuan Li, Xian-ping Liu

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Experimental research on KDP crystal slicing with resin bonded diamond abrasive wire saw

Mengran Ge, Wenbo Bi, Peiqi Ge, Yuchao Bi

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Improving channel depth of stainless steel bipolar plate in fuel cell using process parameters of stamping

Won Tae Park, Chul Kyu Jin, Chung Gil Kang

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Microstructure and tensile properties of laser welded dissimilar Ti-22Al-27Nb and TA15 joints

Kezhao Zhang, Longchang Ni, Zhenglong Lei, Yanbin Chen, Xue Hu

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016 Open Access

A statistical filtering method for denoising of micro-force measurements

Kamil S. Kazimierski, Iwona Piotrowska-Kurczewski, Florian Böhmermann, Oltmann Riemer

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Improved seizure resistance of ultra-high-strength steel ironed cups with a lubricant containing SiO2 nanoparticles

C. J. Tan, A. Aslian, Y. Abe, K. Mori

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

On-machine contact measurement for the main-push propeller blade with belt grinding

Guijian Xiao, Yun Huang, Ya Fei

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Decision-making of feature operation chain considering processing requirements and manufacturing stability

Chunlei Li, Rong Mo, Zhiyong Chang, Haicheng Yang, Neng Wan, Dongliang Zhang

10-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Joint optimal maintenance and inspection for a k-out-of-n system

Vladimir Babishin, Sharareh Taghipour

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Comparative thermal analysis of cutting fluids in pendular surface grinding

Marius Winter, Nadine Madanchi, Christoph Herrmann

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Predicting the tensile strength, impact toughness, and hardness of friction stir-welded AA6061-T6 using response surface methodology

Wasif Safeen, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Haris Aziz, Hassan Abdalla

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A similarity-based reuse system for injection mold design in automotive interior industry

Zhi Li, Xionghui Zhou, Wei Liu, Qiang Niu, Chuipin Kong

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Numerical modeling of the thermal contact in metal forming processes

J. M. P. Martins, D. M. Neto, J. L. Alves, M. C. Oliveira, L. F. Menezes

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

An EDM pulse power generator and its feasible experiments for drilling film cooling holes

C. J. Li, Y. Li, H. Tong, L. Zhao, Q. C. Kong, Z. Q. Wang

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Loading path and microstructure study of Ti-3Al-2.5V tubular components within hot gas forming at 800 °C

Yong Wu, Gang Liu, Kai Wang, Zhiqiang Liu, Shijian Yuan

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Electroplastic cutting influence on power consumption during drilling process

Saqib Hameed, Hernán A. González Rojas, Antonio J. Sánchez Egea, Amelia Napoles Alberro

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

An evaluation of micro milling chip thickness models for the process mechanics

Ali Mamedov, Ismail Lazoglu

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Process modeling and optimization of the staggered backward flow forming process of maraging steel via finite element simulations

Hemant Shinde, Pushkar Mahajan, Abhishek Kumar Singh, Ramesh Singh, K. Narasimhan

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A review of cutting path algorithms for laser cutters

Reginald Dewil, Pieter Vansteenwegen, Dirk Cattrysse

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Numerical and experimental study on large deformation of thin-walled tube through hydroforging process

Yong Xu, Yan Ma, Shihong Zhang, Dayong Chen, Xiaosong Zhang, Jingming Li, Changjian Zhao

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

On-line point cloud data extraction algorithm for spatial scanning measurement of irregular surface in copying manufacture

Ye Tao, Yan Li, Yong-Qing Wang, Yu-Yong Ma

12-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

CVC cyclical shifting mode and its working characteristics for the mills of CSP

Fei Shang, Hongbo Li, Ning Kong, Jie Zhang, Chao Hu, Liang Chen, Chao Zhang, Jianfei Chen

14-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Determination of mechanical properties of anisotropic thin-walled tubes under three-dimensional stress state

X. L. Cui, S. J. Yuan

14-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Optimization of PMEDM process parameter for maximizing material removal rate by Taguchi’s method

Banh Tien Long, Nguyen Huu Phan, Ngo Cuong, Vijaykumar S. Jatti

14-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Influence of the chemical composition of weld electrode on the mechanical properties of submerged arc welded pipe

Kahraman Sirin, Sule Y. Sirin, Erdinc Kaluc

14-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Research of abrasive embedment-free lapping on soft-brittle lithium niobate wafer

Nannan Zhu, Fangzhi Zheng, Yongwei Zhu, Sheng Xu, Dunwen Zuo

14-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Research on surface topography in ultra-precision flycutting based on the dynamic performance of machine tool spindle

Xu Yang, Chenhui An, Zhenzhong Wang, Quanjin Wang, Yunfeng Peng, Jian Wang

14-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Prediction of grinding force for brittle materials considering co-existing of ductility and brittleness

Chongjun Wu, Beizhi Li, Jianguo Yang, Steven Y. Liang

15-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A green line heating forming technology for ultra-thick plate

Guannan Chu, Yanli Lin, Gang Chen

15-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Development of a new combined heat source model for welding based on a polynomial curve fit of the experimental fusion line

Junqiang Wang, Jianmin Han, Joseph P. Domblesky, Zhiyong Yang, Yingxin Zhao, Qiang Zhang

15-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

The effects of material formulation and manufacturing process on mechanical and thermal properties of epoxy/clay nanocomposites

H. Salam, Yu Dong, I. J. Davies, A. Pramanik

16-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Trajectory tracking control for perturbed robot manipulators using iterative learning method

Farah Bouakrif, Michel Zasadzinski

16-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Tool life and tool wear in taper turning of a nickel-based superalloy

A. Í. S. Antonialli, A. Magri, A. E. Diniz

17-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Inverse surface integrity problem in ultrasonic impact-treated AISI 304 stainless steel components

G. Q. Wang, X. P. Zhu, M. K. Lei, D. M. Guo

17-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study

Khaled Giasin, Alma Hodzic, Vaibhav Phadnis, Sabino Ayvar-Soberanis

17-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Coupled lateral and torsional vibrations of the micro-drilling spindle systems

An-Chen Lee, Tien-Dat Hoang

18-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A review on recent developments in machining methods based on electrical discharge phenomena

Mohammad Reza Shabgard, Ahad Gholipoor, Hamid Baseri

18-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Development of a double-frequency elliptical vibration cutting apparatus for freeform surface diamond machining

Xiaoqin Zhou, Chengming Zuo, Qiang Liu, Rongqi Wang, Jieqiong Lin

19-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Robotic GMAW online learning: issues and experiments

Reyes Rios-Cabrera, America B. Morales-Diaz, Jaime F. Aviles-Viñas, Ismael Lopez-Juarez

19-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Modeling and analysis of aerospace remanufacturing systems with scenario analysis

Vesra Hashemi, Mingyuan Chen, Liping Fang

19-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Comparison on gas bubble and pulse trains of deep-cavity electrical discharge machining with/without rotary ultrasonic assistance

Albert Wen-Jeng Hsue, Tian-Jun Hao

19-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016 Open Access

Micro-machinability of nanoparticle-reinforced Mg-based MMCs: an experimental investigation

Xiangyu Teng, Dehong Huo, Eugene Wong, Ganesh Meenashisundaram, Manoj Gupta

21-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

An analysis of tube drawing process used to produce squared sections from round tubes through FE simulation and response surface methodology

Morteza Hosseinzadeh, Mehran Ghasempour Mouziraji

21-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

An accelerated explicit method with GPU parallel computing for thermal stress and welding deformation of large structure models

Ninshu Ma

21-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Effect of curing overheating on interlaminar shear strength and its modelling in thick FRP laminates

Luca Esposito, Luca Sorrentino, Francesco Penta, Costanzo Bellini

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear

H. Aouici, M. Elbah, M. A. Yallese, B. Fnides, I. Meddour, S. Benlahmidi

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Finite element analysis for diagnosis of fatigue failure of composite materials in product development

Z. M. Bi, Donald W. Mueller Jr.

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Optimization of demand-related packaging sizes using a p-median approach

Jan Brinker, Halil Ibrahim Gündüz

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Geometric error identification and compensation of linear axes based on a novel 13-line method

Jie Li, Fugui Xie, Xin-Jun Liu, Weidong Li, Shaowei Zhu

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Spindle axial thermal growth modeling and compensation on CNC turning machines

Kuo Liu, Yu Liu, Mingjia Sun, Xiaolei Li, Yuliang Wu

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Effect of tool geometry on loads developing in friction stir spot welds of polycarbonate sheets

F. Lambiase, A. Paoletti, A. Di Ilio

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

An approach to evaluate the effect of cutting force and temperature on the residual stress generation during milling

Xiaohui Jiang, Beizhi Li, Lianfeng Wang, Zhonghou Wang, Haolin Li

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Electrical discharge machining of electron beam melting formed shrouded blisk

Wei Liang, Xiaoming Kang, Wansheng Zhao, Yuxuan Yang

23-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Optimizing the order picking of a scholar and office supplies warehouse

C. A. Isler, G. M. Righetto, R. Morabito

28-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Experimental studies on optimized mechanical properties while dissimilar joining AA6061 and AA5010 in a friction stir welding process

Masoud Ahmadnia, Saeid Shahraki, Mojtaba Ahmadi Kamarposhti

28-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Influence of metallic matrix on the densification behavior of zirconium diboride copper nickel composite processed by laser sintering

Tiago Czelusniak, Fred L. Amorim

28-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Iterative optimization of tool path planning in 5-axis flank milling of ruled surfaces by integrating sampling techniques

Chih-Hsing Chu, Chi-Lung Kuo

28-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016 Open Access

A new conceptual design method to support rapid and effective mapping from product design specification to concept design

Haizhu Zhang, Xin Han, Rong Li, Shengfeng Qin, Guofu Ding, Kaiyin Yan

28-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Experimental and numerical investigation into effect of weld configuration geometry on distribution of residual stress and temperature in the welded parts of stainless steel

Ebrahim Nateghi, Abdolhamid Gorji Volukola

28-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Application of optimization techniques in the production of parts of martensitic stainless steel

Carmen Brum Rosa, Julio Cezar Mairesse Siluk, Aline Martins dos Santos

30-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Investigation of the joint length of weldment of environmental-friendly magnetic pulse welding process

Akhil Garg, Biranchi Panda, K. Shankhwar

30-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

A customized QFD (quality function deployment) applied to management of automation projects

E. C. Cordeiro, G. F. Barbosa, L. G. Trabasso

31-03-2016 | ORIGINAL ARTICLE | Issue 5-8/2016

Molten pool behaviors and weld forming characteristics of all-position tandem narrow gap GMAW

X. Y. Cai, C. L. Fan, S. B. Lin, C. L. Yang, J. Y. Bai

Current Publications

Premium Partners

    Image Credits