Skip to main content
Register
Springer Professional
TOOLBAR 1 2 3 4
SEARCH
MENU 1 2 3 4
Close search form
EXTENDED SEARCH
main-content
Top
Issue archive
​
archive
​
insite
Print
​
print
​
share

Journal

The International Journal of Advanced Manufacturing Technology

 The International Journal of Advanced Manufacturing Technology 5-8/2018

Issue 5-8/2018

Digital Enterprise Technologies

Table of Contents ( 120 Articles )

12-07-2017 | Editorial | Issue 5-8/2018

Special issue on Digital Enterprise Technologies
Changqing Liu, Yingguang Li, James Gao

18-02-2017 | ORIGINAL ARTICLE | Issue 5-8/2018 Open Access

An overview of knowledge sharing in new product development
James Gao, Alain Bernard
Download PDF-version

09-03-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Assembly sequence planning for open-architecture products
Hongqin Ma, Qingjin Peng, Jian Zhang, Peihua Gu

18-01-2017 | ORIGINAL ARTICLE | Issue 5-8/2018 Open Access

Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design
Matthew Ozoemena, Wai M. Cheung, Reaz Hasan
Download PDF-version

17-01-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Manufacturing process information modeling using a metamodeling approach
Bin Yang, Lihong Qiao, Na Cai, Zuowei Zhu, Muqi Wulan

10-05-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Using autonomous intelligence to build a smart shop floor
Dunbing Tang, Kun Zheng, Haitao Zhang, Zequn Zhang, Zelei Sang, Tao Zhang, Javier-Alfonso Espinosa-Oviedo, Genoveva Vargas-Solar

25-11-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

Research on key technologies for immune monitoring of intelligent manufacturing system
Qixiang Cai, Dunbing Tang, Haihua Zhu, Jianhua Zhou

06-03-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A Lean PSS design and evaluation framework supported by KPI monitoring and context sensitivity tools
Dimitris Mourtzis, Sophia Fotia, Ekaterini Vlachou, Angelos Koutoupes

03-12-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

A collaborative machine tool maintenance planning system based on content management technologies
Shan Wan, Dongbo Li, James Gao, Rajkumar Roy, Fei He

15-12-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

Research on surface morphology of the ruled surface in five-axis flank milling
Maoyue Li, Jingang Huang, Xianli Liu, Jiuqiang Wang, Lin Jia

01-12-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

The mechanism of curvature for complex surfaces during five-axis flank milling
Zhiyong Song, Liping Wang, Wenjian Tao, Wei Wang

28-11-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

Improved forecasting compensatory control to guarantee the remaining wall thickness for pocket milling of a large thin-walled part
Xinzhi Wang, Qingzhen Bi, Limin Zhu, Han Ding

16-12-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

An error prediction model of NC machining process considering multiple error sources
HU Weixin, Yanlong Cao, Jiangxin Yang, Hui-chao Shang, Wen-bo Wang

03-06-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Effects of tool orientation and surface curvature on surface integrity in ball end milling of TC17
Changfeng Yao, Liang Tan, Pan Yang, Dinghua Zhang

02-03-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Tool shape-performance-application integrated design approach: a development and a numerical validation
Wei Ji, Zemin Zhao, Xianli Liu

14-12-2016 | ORIGINAL ARTICLE | Issue 5-8/2018 Open Access

Hole-making processes and their impacts on the microstructure and fatigue response of aircraft alloys
Dan Sun, Patrick Lemoine, Daniel Keys, Patrick Doyle, Savko Malinov, Qing Zhao, Xuda Qin, Yan Jin
Download PDF-version

07-11-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining
Irina Wong MM, AI Azmi, CC Lee, AF Mansor

19-11-2016 | ORIGINAL ARTICLE | Issue 5-8/2018

Phase I monitoring of simple linear profiles in multistage processes with cascade property
Mahdiyeh Kalaei, Karim Atashgar, Seyed Taghi Akhavan Niaki, Paria Soleimani

25-01-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Parameter optimisation of friction stir welded dissimilar polymers joints
Shayan Eslami, M. A. V. de Figueiredo, Paulo J. Tavares, P. M. G. P. Moreira

16-02-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Simulation of a uniform energy control strategy of single-phase AC resistance spot welding
Kang Zhou, Ping Yao

09-03-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Finite element simulation of pin shape influence on material flow, forces in friction stir welding
Rahul Jain, Surjya K. Pal, Shiv B. Singh

15-03-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

STEP-compliant CNC with T-spline enabled toolpath generation capability
Gang Zhao, Yazui Liu, Wenlei Xiao, Oleksandr Zavalnyi, Lianyu Zheng

31-03-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Analytical models for the evaluation of deep-lane autonomous vehicle storage and retrieval system performance
Gianluca D’Antonio, Manuela De Maddis, Joel Sauza Bedolla, Paolo Chiabert, Franco Lombardi

29-05-2017 | Original Article | Issue 5-8/2018 Open Access

Quality assessment in laser welding: a critical review
John Stavridis, Alexios Papacharalampopoulos, Panagiotis Stavropoulos
Download PDF-version

30-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Bending processing and mechanism of laser forming pure aluminum metal foam
Min Zhang, ChengJun Chen, Yong Huang, Tao Zou

30-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Research on the influence of nonlocal effect on specific roll pressure by nonlocal stress gradient model in strip rolling
Si Li, Zhigang Wang, Jinhua Ruan, Changming Liu, Zengbing Xu

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Effect of nanoclay on thermal behavior of jute reinforced composite
Muhammad Hasibul Hasan, Md. Sazib Mollik, Muhammad Mahbubur Rashid

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Kinematic modeling and base frame calibration of a dual-machine-based drilling and riveting system for aircraft panel assembly
Dan Zhao, Yunbo Bi, Yinglin Ke

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Experimental comparison of ground surface characteristics for P/M Ti2AlNb-based alloy using CBN and diamond grinding wheels
Kyong-Ho Sim, Feihu Zhang, Guofeng Wang, Xiaoshuang Rao

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Milling of maraging steel components produced by selective laser melting
Alessandro Fortunato, Amarildo Lulaj, Shreyes Melkote, Erica Liverani, Alessandro Ascari, Domenico Umbrello

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Multifractal analysis for gas metal arc welding
Yong Huang, Kehong Wang, Jimi Fang, Xiaoxiao Zhou

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A magnetic suspension spindle system for small and micro holes EDM
Yongfeng Guo, Zebin Ling, Xiaoyou Zhang, Yerui Feng

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Design of friction stir welding tools reducing heat flow into spindle
Hongjun Li, Wei Qin, Di Liu, Qinchuan Li, Yuecheng Wu

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Optimal build orientation based on material changes for FGM parts
Sheng-li Mi, Xiao-yue Wu, Long Zeng

31-08-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Investigation on chip morphology and properties in drilling aluminum and titanium stack with double cone drill
Kai Liu, Jianfeng Li, Jie Sun, Zhaoju Zhu, Hualin Meng

02-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Experimental investigation of hot-work tool steels performances under the creep-fatigue regime
B. Reggiani, L. Donati, M. Ben Tahar, L. Tomesani

02-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Reliability analysis comparison on punching tool sets due to different maintenance decisions: a case study from the pulp manufacturing industry
Rosmaini Ahmad

02-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Research on the ductile-mode machining of monocrystalline silicon using polycrystalline diamond (PCD) tools
Jinxuan Bai, Qingshun Bai, Chao Hu, Xin He, Xudong Pei

02-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

The multi-physics analysis for a novel tool structure to improve the accuracy in electrochemical micro-machining
Weidong Liu, Zhen Luo, Tao Yuan, Yang Li, Hui Zhang, Sansan Ao

02-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A numerical–analytical approach to predict high cycle fatigue performance of finish machined AISI 316L steel
R. Grissa, F. Zemzemi, R. Seddik, R. Fathallah

03-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A comparative study of mechanical properties of metal inert gas (MIG)-cold metal transfer (CMT) and fiber laser-MIG hybrid welds for 6005A T6 extruded sheet
Giovanna Cornacchia, Silvia Cecchel, Andrea Panvini

04-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Friction stir consolidation of aluminum machining chips
X. Li, D. Baffari, A. P. Reynolds

04-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718
Xiaohong Lu, Xiaochen Hu, Zhenyuan Jia, Mingyang Liu, Song Gao, Chenglin Qu, Steven Y. Liang

04-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Modular design method for filament winding process equipment based on GGA and NSGA-II
Xiaoming Xu, Wuxiang Zhang, Xilun Ding

04-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Tool wear behavior of thermal-mechanical effect for milling Ti-6Al-4V alloy in cryogenic
Fengbiao Wang, Yongqing Wang, Haibo Liu

05-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Performance of AC servo axial-infeed incremental warm rolling equipment and simulated production of spline shafts
Hongxing Sun, Min-Chao Cui, Yishuai Zhang, Sheng-Dun Zhao, Da-Wei Zhang, Yoshihiro Deguchi

05-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Dynamic modal prediction and experimental study of thin-walled workpiece removal based on perturbation method
Weijun Tian, Junxue Ren, Jinhua Zhou, Dazhen Wang

05-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Prediction of cutting forces and vibration in titanium alloy milling using a toroidal cutter
Vinícius Augusto Diniz Silva, Robson Pederiva, Henrique Kull Neto, Anselmo Eduardo Diniz

05-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Probabilistic methodology for predicting the dispersionof residual stresses and Almen intensity considering shot peening process uncertainties
A. Atig, R. Ben Sghaier, R. Seddik, R. Fathallah

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Increment in laser bending angle by forced bottom cooling
K. Paramasivan, Sandip Das, Sundar Marimuthu, Dipten Misra

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Numerical and experimental investigation on the cross-wedge rolling of powder sintering TC4 alloy
Junling Li, Baoyu Wang, Hongchao Ji, Jing Zhou, Xiaobin Fu, Xu Huang

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Study of microstructural inhomogeneity and its effects on mechanical properties of multi-layer laser welded joint
Xiong Zhang, Gaoyang Mi, Shuo Li, Xiyuan Hu, Chunming Wang, Yuelai Zhang

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Investigation of process parameter effect on anisotropic properties of 3D printed sand molds
Nicolas Coniglio, Tharmalingam Sivarupan, Mohamed El Mansori

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Shrinkage compensation of holes via shrinkage of interior structure in FDM process
Ulas Yaman

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018 Open Access

Influence of laser exposure time and point distance on 75-μm-thick layer of selective laser melted Alloy 718
P. Karimi, T. Raza, J. Andersson, L.-E. Svensson
Download PDF-version

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Experimental research on semiconductor shaping by abrasive-spark hybrid machining
Weiwei Zhou, Zhidong Liu, Bin Zhang, Mingbo Qiu, Haoran Chen, Lida Shen

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Laser welding of the high-strength Al–Cu–Li alloy
A. G. Malikov, A. M. Orishich

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

In-process prediction of roundness based on dynamic cutting forces
Somkiat Tangjitsitcharoen, Deuanphan Chanthana

06-09-2017 | Original Article | Issue 5-8/2018

Performance of a pressurized internal-cooling slotted grinding wheel system
Ruitao Peng, Xiaofang Huang, Xinzi Tang, Rui Chen, Yunbo Hu

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Principal component analysis and singular value decomposition used for a numerical sensitivity analysis of a complex drawn part
Christian Schwarz, Patrick Ackert, Reinhard Mauermann

06-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Shape optimization methodology of clinching tools based on Bezier curve
Meng-han Wang, Gui-qian Xiao, Zhi Li, Jin-qiang Wang

07-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Aggregating predictions of multi-models for the small dataset learning tasks in the TFT-LCD process
Der-Chiang Li, Hung-Yu Chen

07-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Hybrid aluminium matrix composite AWJ turning using olivine and Barton garnet
Akash Nag, Jiří Ščučka, Petr Hlavacek, Dagmar Klichová, Ashish Kr Srivastava, Sergej Hloch, Amit Rai Dixit, Josef Foldyna, Michal Zelenak

07-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting
Qixiang Feng, Qian Tang, Ying Liu, Rossi Setchi, Shwe Soe, Shuai Ma, Long Bai

07-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Theoretical investigation of vertical elliptic vibration-assisted grinding (EVAG) technology
C. L. Li, Y. Peng, D. L. Chen, T. L. Pan

07-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Finite element analysis and simulation of liquid-assisted laser beam machining process
Vinit Mistry, Sagil James

08-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Characterization of direct selective laser sintering of alumina
E. M. Fayed, A. S. Elmesalamy, M. Sobih, Y. Elshaer

08-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018 Open Access

Investigation of influence of tool rake angle in single point diamond turning of silicon
Amir Mir, Xichun Luo, Kai Cheng, Andrew Cox
Download PDF-version

09-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Formability improvement in single point incremental forming of truncated cone using a two-stage hybrid deformation strategy
Mohsen Shamsari, Mohammad Javad Mirnia, Majid Elyasi, Hamid Baseri

09-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Cell geometry effect on in-plane energy absorption of periodic honeycomb structures
F. N. Habib, P. Iovenitti, S. H. Masood, M. Nikzad

09-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Analysis of a miniaturized 3D PDMS channel deflector fabricated using lost-wax casting
Chunhui Chung, Yann-Jiun Chen

10-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Thermal analysis and kinetics of the oxidative roasting process of a copper smelter dust
D. O. Okanigbe, A. P. I. Popoola, A. A. Adeleke

11-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Microgrinding characteristics of Zr-based bulk metallic glasses
Liu Yin, Gong Ya-dong, Sun Yao, Zhang Huan, Li Qiang

11-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

On the use of machine learning methods to predict component reliability from data-driven industrial case studies
Emanuel F. Alsina, Manuel Chica, Krzysztof Trawiński, Alberto Regattieri

11-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

High efficiency simulation of five-axis cutting force based on the symbolically solvable cutting contact boundary model
Zerun Zhu, Fangyu Peng, Rong Yan, Kang Song, Zepeng Li, Xianyin Duan

11-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel
Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene

11-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

CEEMDAN and OWMRA as a hybrid method for rolling bearing fault diagnosis under variable speed
Mohamed Lamine Bouhalais, Abderrazek Djebala, Nouredine Ouelaa, Mohamed Khemissi Babouri

11-09-2017 | Original Article | Issue 5-8/2018

Microstructure, mechanical, and tribological properties of hydrogenated amorphous carbon film deposited on Ti6Al4V alloy under different substrate bias voltage
Weijiu Huang, Jianjun Ma, Junjun Wang, Linqing Wang, Zhongqing Tian

12-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Effect of ultrasonic peening technology on the thermal fatigue of rolling mill rolls
Alireza Abbasi, Saeid Amini, Ghanbar Ali Sheikhzadeh

13-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Monitoring batch processes with an incomplete set of variables
L. P. L. de Oliveira, D. Marcondes Filho

13-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Design of hyperbolic profile grinding wheels manufactured with vitrified cBN segments for advancedmanufacturing applications
M. J. Jackson, V. Ruxton

13-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Joint replenishment of associated spare parts using clustering approach
U. C. Moharana, S. P. Sarmah

14-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Parametric study of ultrasonic-assisted hole sinking micro-EDM of titanium alloy
Param Singh, Vinod Yadava, Audhesh Narayan

14-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018 Open Access

Diode area melting single-layer parametric analysis of 316L stainless steel powder
Miguel Zavala-Arredondo, Kristian M. Groom, Kamran Mumtaz
Download PDF-version

14-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Numerical and experimental studies of longitudinal and longitudinal-torsional vibrations in drilling of AISI 1045
Hossein Paktinat, Saeid Amini

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Investigation of surface uniformity machined by ceramic brush
Youyoung Kim, Jonghyun Kim, Sun-Kyu Lee

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Femtosecond laser ablation power level identification based on the ablated spot image
Fu-bin Wang, Paul Tu, Chen Wu, Yang Liu, Ding Feng

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Fault detection and optimal feature selection in automobile motor-head machining process
Edgar O. Reséndiz-Flores, Jesús A. Navarro-Acosta, Cecilia G. Mota-Gutiérrez, Yadira I. Reyes-Carlos

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Optimization of machining strip width using effective cutting shape of flat-end cutter for five-axis free-form surface machining
Baohai Wu, Mancang Liang, Ying Zhang, Ming Luo, Kai Tang

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Sheet metal forming in the case of hinge manufacturing process. Part 1: Experimental study
Wissal Yangui, Noamen Guermazi, Ahmed Ktari, Khaled Elleuch

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A comparative study of hole-making performance by coated and uncoated WC/Co cutters in helical milling of Ti/CFRP stacks
Shipeng Li, Xuda Qin, Yan Jin, Dan Sun, Yonghang Li

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A new approach of a gradient nanograined surface layer for Mg-3Al-1Zn alloy induced by SMRGT
Biqiang Chen, Guifeng Zhang, Linjie Zhang, Tingting Xu

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Design guideline for intermetallic compound mitigation in Al-Mg dissimilar welding through addition of interlayer
L. H. Shah, A. Gerlich, Y. Zhou

16-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Research on controllability of final macroscopic specimen shape in electromagnetic superposed forming
Anlin Long, Min Wan, Wenping Wang, Xiangdong Wu, Xuexi Cui

17-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Effect of orientations of an irregular part in vibratory part feeders
M. Suresh, V. Narasimharaj, G. K. Arul Navalan, V. Chandra Bose

18-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Online robust estimation of flux and load torque in induction motors
Mohamed Bahloul, Larbi Chrifi-Alaoui, Alessandro N. Vargas, Mohamed Chaabane, Said Drid

18-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Experimental investigation and application on the cutting performance of cutting head for rock cutting assisted with multi-water jets
Songyong Liu, Huifu Ji, Dongdong Han, Chuwen Guo

18-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

A comparative study on the modelling of EDM and hybrid electrical discharge and arc machining considering latent heat and temperature-dependent properties of Inconel 718
Afzaal Ahmed, A. Fardin, M. Tanjilul, Y.S. Wong, M. Rahman, A. Senthil Kumar

18-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Defect analysis and design optimization on the hot forging of automotive balance shaft based on 3D and 2D simulations
Yahui Liu, Yun Wu, Jun Wang, Shumei Liu

18-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Experimental investigation on electrical discharge diamond grinding of RB-SiC ceramics
Xiaoshuang Rao, Feihu Zhang, Chen Li, Yingjie Li

18-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Method for producing porosity-free joints in laser beam welding of maraging steel 250
Reuven Katz, Anton Zak, Amnon Shirizly, Amiram Leitner, Elie Louzon

19-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Surface roughness and radiusing of Ti6Al4V selective laser melting-manufactured parts conditioned by barrel finishing
A. Boschetto, L. Bottini, F. Veniali

19-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Tailored pressure distributions generated by vaporizing tailored metal foils
S. Cai

19-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Initial position optimization of preform for large-scale strut forging
Da-Wei Zhang, Shuai-Peng Li, Fei Jing, Shu-Qin Fan, Sheng-Dun Zhao

19-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Effect of welding process parameters on hybrid GMAW-GTAW welding process of AZ31B magnesium alloy
Xu Shen, Guohong Ma, Peng Chen

19-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Micro ball-end milling—an emerging manufacturing technology for micro-feature patterns
Tej Pratap, Karali Patra

19-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Multi-stage manufacturing/re-manufacturing facility location and allocation model under uncertain demand and return
Santhosh Srinivasan, Shahul Hamid Khan

20-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Spindle thermal error robust modeling using LASSO and LS-SVM
Feng Tan, Ming Yin, Lin Wang, Guofu Yin

20-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Milling performance optimization of DD5 Ni-based single-crystal superalloy
Qiang Li, Ya-dong Gong, Yao Sun, Yin Liu, Cai-xia Liang

20-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Geometry of contact during tooling tasks via dynamic estimation
Gia-Hoang Phan, Paolo Tommasino, Asif Hussain, Clint Hansen, Sylvie Castagne, Domenico Campolo

20-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Measurement and identification of geometric errors of translational axis based on sensitivity analysis for ultra-precision machine tools
Weichao Peng, Hongjian Xia, Sujuan Wang, Xindu Chen

20-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Study on laser-assisted dry micro-ground surface of difficult-to-cut materials
M. F. Hu, J. Xie, H. H. Su, J. N. Liu

20-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Surface properties and fatigue failure analysis of alloy 718 surfaces milled by abrasive and plain waterjet
A. Rivero, A. Alberdi, T. Artaza, L. Mendia, A. Lamikiz

21-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Material removal process of single-crystal SiC in chemical-magnetorheological compound finishing
Huazhuo Liang, Jiabin Lu, Jisheng Pan, Qiusheng Yan

21-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Modelling of cutting forces and researching calibration method in helical milling
S. Shang, X. D. Qin, J. H. Li, S. P. Li, H. Li, T. Huang, Y. Jin, D. Sun

21-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Comparison of different polynomial functions for predicting cutting coefficients in the milling process
Liping Wang, Hao Si, Liwen Guan, Zengkun Liu

21-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Development of superplasticity in an Al–Mg alloy through severe plastic deformation
V. Jaya Prasad, N. Mohanarao, S. Kamaluddin, S. S. Bhattacharya

22-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Critical condition prediction of adiabatic shear fracture in high-speed cutting TA2 alloy
Liyao Gu

22-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Research on gear tooth forming control in the closed die hot forging of spiral bevel gear
Zhen-Shan Gao, Ju-Bo Li, Xiao-Zhong Deng, Jian-Jun Yang, Fu-Xiao Chen, Ai-Jun Xu, Lei Li

22-09-2017 | ORIGINAL ARTICLE | Issue 5-8/2018

Dynamic milling stability of thin-walled component considering time variation of coupling deflection and dynamic characteristics of tool-workpiece system
Li Zhang, Lianjie Ma, Dawei Zhang

Current Publications

The International Journal of Advanced Manufacturing Technology 1-2/2021

Issue 1-2/2021
The International Journal of Advanced Manufacturing Technology 7-8/2021

Issue 7-8/2021
The International Journal of Advanced Manufacturing Technology 11-12/2021

Issue 11-12/2021
The International Journal of Advanced Manufacturing Technology 9-10/2021

Issue 9-10/2021
The International Journal of Advanced Manufacturing Technology 1-2/2021

Issue 1-2/2021
The International Journal of Advanced Manufacturing Technology 3-4/2021

Issue 3-4/2021
The International Journal of Advanced Manufacturing Technology 5-6/2021

Issue 5-6/2021
The International Journal of Advanced Manufacturing Technology 7-8/2020

Issue 7-8/2020
The International Journal of Advanced Manufacturing Technology 9-10/2020

Issue 9-10/2020
The International Journal of Advanced Manufacturing Technology 11-12/2020

Issue 11-12/2020

Premium Partners

in-adhesives MKVS Hellmich GmbH Krahn Ceramics
    Image Credits

    Version: 0.1355.0