Skip to main content
main-content
Top

Journal

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 5-8/2019

Issue 5-8/2019

Table of Contents ( 80 Articles )

14-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Interface characteristics of Mg/Al bimetal produced by a novel liquid-liquid compound casting process with an Al interlayer

Qiang Hu, Zailiang Jiang, Wenming Jiang, Guangyu Li, Feng Guan, Haixiao Jiang, Zitian Fan

14-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling

Wei Zhao, Haitao Wang, Wei Chen

14-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019 Open Access

Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining

Wei Bai, Anuj Bisht, Anish Roy, Satyam Suwas, Ronglei Sun, Vadim V. Silberschmidt

14-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Comparison of methods to correlate input parameters with depth of penetration in LASER welding

Luiz Eduardo dos Santos Paes, Milton Pereira, Walter Lindolfo Weingaertner, Américo Scotti, Tiago Souza

15-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Investigation on the influence of the equivalent bending stiffness of the thin-walled parts on the machining deformation

Bianhong Li, Hanjun Gao, Hongbin Deng, Hai Pan, Baoguo Wang

15-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Forming defect control and optimization of multi-step spinning thickening process considering the variation of spinning gap

Kemin Xue, Weizheng Yang, Siliang Yan, Ping Li

16-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Zoom synchrosqueezing transform-based chatter identification in the milling process

Songtao Xi, Hongrui Cao, Xingwu Zhang, Xuefeng Chen

16-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Impact of fused deposition modeling (FDM) process parameters on strength of built parts using Taguchi’s design of experiments

Uzair Khaleeq uz Zaman, Emilien Boesch, Ali Siadat, Mickael Rivette, Aamer Ahmed Baqai

16-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Experimental study on the variance of mechanical properties of polyamide 6 during multi-layer sintering process in selective laser sintering

Zhicheng Ling, Jinzhe Wu, Xiang Wang, Xiaofeng Li, Jinjin Zheng

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Improved precise integration method for chatter stability prediction of two-DOF milling system

Hongkun Li, Yuebang Dai, Zhenfang Fan

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

3D laser shock peening as a way to improve geometrical accuracy in selective laser melting

Nikola Kalentics, Andreas Burn, Michael Cloots, Roland E. Logé

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Investigating the effects of electric discharge machining parameters on material removal rate and surface roughness on AISI D2 steel using RSM-GRA integrated approach

Muhammad Hanif, Wasim Ahmad, Salman Hussain, Mirza Jahanzaib, Abdul Hakim Shah

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

A novel approach with time-invariant transition matrix for surface location error prediction in low radial immersion milling

Yuebang Dai, Hongkun Li, Jinxin Yao, Shengxian Liu

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Optimization strategies for robotic additive and subtractive manufacturing of large and high thin-walled aluminum structures

Guocai Ma, Gang Zhao, Zhihao Li, Min Yang, Wenlei Xiao

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

A precision polishing method for Wolter-I type optical mandrel

Fanxing Kong, Tao Sun, Yanquan Geng

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

SMT defect classification by feature extraction region optimization and machine learning

Ji-Deok Song, Young-Gyu Kim, Tae-Hyoung Park

17-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Application of compressed air in the online monitoring of surface roughness and grinding wheel wear when grinding Ti-6Al-4V titanium alloy

Shaohui Yin, DuyTrinh Nguyen, FengJun Chen, Qingchun Tang, Le Anh Duc

19-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Influence of parameter matching on performance of high-speed rotary ultrasonic elliptical vibration-assisted machining for side milling of titanium alloys

Jiajia Liu, Xinggang Jiang, Xiong Han, Deyuan Zhang

19-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Effect of in-process active cooling on forming quality and efficiency of tandem GMAW–based additive manufacturing

Junbiao Shi, Fang Li, Shujun Chen, Yun Zhao, Hongyu Tian

19-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching

Gorka Ortiz-de-Zarate, Andres Sela, Mikel Saez-de-Buruaga, Mikel Cuesta, Aitor Madariaga, Ainhara Garay, Pedro J. Arrazola

20-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Evaluating the use of a new type of impact damper for internal turning tool bar in deep holes

Anselmo E. Diniz, Wallyson Thomas Alves da Silva, Daniel Iwao Suyama, Robson Pederiva, Marcos Vieira Albuquerque

20-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Uncertainty in manufacturing of lightweight products in composite laminate—part 2: experimental validation

Wilma Polini, Andrea Corrado

20-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

A new contouring error estimation for the high form accuracy of a multi-axis CNC machine tool

Jing Zhang, Jiexiong Ding, Qingzhao Li, Zhong Jiang, Qicheng Ding, Li Du, Wei Wang

20-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Uncertainty in manufacturing of lightweight products in composite laminate: part 1—numerical approach

Wilma Polini, Andrea Corrado

20-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Evaluation of batching and layout on the performance of flexible manufacturing system

Anupma Yadav, S. C. Jayswal

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Effects of rotary ultrasonic elliptical machining for side milling on the surface integrity of Ti-6Al-4V

Jiajia Liu, Xinggang Jiang, Xiong Han, Ze Gao, Deyuan Zhang

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Study on grinding force model in ultrasonic vibration-assisted grinding of alloy structural steel

Deguo Li, Jinyuan Tang, Haifeng Chen, Wen Shao

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Fastening method selection with simultaneous consideration of product assembly and disassembly from a remanufacturing perspective

M. W. Geda, C. K. Kwong, Huimin Jiang

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

An efficient coupled Eulerian-Lagrangian finite element model for friction stir processing

Mohammad Ali Ansari, Avik Samanta, Reza Abdi Behnagh, Hongtao Ding

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Evaluation of a hybrid cryogenic deburring method to remove uncut fibers on carbon fiber-reinforced plastic composites

Ki Moon Park, Rendi Kurniawan, Zhen Yu, Tae Jo Ko

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer

Shilpesh R. Rajpurohit, Harshit K. Dave

21-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019 Open Access

Development of similarity-based scaling criteria for creep age forming of large/extra-large panels

Yong Li, Zhutao Shao, Qi Rong, Zhusheng Shi, Daniel Balint, Xiaoguang Sun, Lichun Meng, Jianguo Lin

22-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Effect of punching die angular clearance on punched hole quality of S275 mild steel sheet metal

N. A. Jaafar, A. B. Abdullah, Z. Samad

22-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Influence of diamond tool chamfer angle on surface integrity in ultra-precision turning of singe crystal silicon

Yigit Karpat

22-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Densification, microstructure and mechanical properties of spark plasma sintered Ni-17%Cr binary alloys

Bukola Joseph Babalola, Mxolisi Brendon Shongwe, Babatunde Abiodun Obadele, Peter Apata Olubambi

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

An investigation in the ultra-precision fly cutting of freeform surfaces on brittle materials with high machining efficiency and low tool wear

Zhanwen Sun, Suet To, K. M. Yu

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Multi-objective optimization of surface roughness, thrust force, and torque produced by novel drill geometries using Taguchi-based GRA

Güven Meral, Murat Sarıkaya, Mozammel Mia, Hakan Dilipak, Ulvi Şeker, Munish K. Gupta

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Simulated and experimental studies of laser-MIG hybrid welding for plate-pipe dissimilar steel

Xiaohong Zhan, Youfa Wu, Yue Kang, Xu Liu, Xiaodong Chen

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Real-time monitoring of welding process using air-coupled ultrasonics and acoustic emission

Lu Zhang, Alexandra Carmen Basantes-Defaz, Didem Ozevin, Ernesto Indacochea

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

A comparative study on the effects of magnetic field on the anode surface roughness in the forward and reverse electrolyte feed pattern during electrochemical machining

Li Long, Baoji Ma, Peiyong Cheng, Kang Yun, Honghong Gao

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Design of a wire measurement system for dynamic feeding TIG welding using instantaneous angular speed

Régis Henrique Gonçalves e Silva, Luiz Eduardo dos Santos Paes, Gustavo Luis de Sousa, Cleber Marques, Alberto Bonamigo Viviani, Mateus Barancelli Schwedersky, Tiago Loureiro Fígaro da Costa Pinto

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process

Aviral Misra, Pulak M. Pandey, U. S. Dixit, Anish Roy, Vadim V. Silberschmidt

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Design, simulation, and hardware implementation of novel optimum operating point tracker of PV system using adaptive step size

Abdelhamid Loukriz, Sabir Messalti, Abdelghani Harrag

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Method of fabricating an array of diffractive optical elements by using a direct laser lithography

Young-Gwang Kim, Hyug-Gyo Rhee, Young-Sik Ghim, Yun-Woo Lee

23-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Influence of pulsed laser ablation on the surface integrity of PCBN cutting tool materials

Berend Denkena, Alexander Krödel, Thilo Grove

24-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Spindle thermal error modeling based on selective ensemble BP neural networks

Qin Yin, Feng Tan, Hongxu Chen, Guofu Yin

24-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Single-axis driven measurement method to identify position-dependent geometric errors of a rotary table using double ball bar

Shuang Ding, Weiwei Wu, Xiaodiao Huang, Aiping Song, Yifu Zhang

24-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Entrance shape design of spread extrusion die for large-scale aluminum panel

Zhiwen Liu, Luoxing Li, Jie Yi, Guan Wang

24-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Observed edge radius behavior during MD nanomachining of silicon at a high uncut chip thickness

Lukman N. Abdulkadir, Khaled Abou-El-Hossein

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Finite element simulation of saw-tooth chip in high-speed machining based on multiresolution continuum theory

Guohe Li, Jacob Smith, Wing Kam Liu

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Optimal design of a manufacturing-remanufacturing-transport system within a reverse logistics chain

Ayoub Tighazoui, Sadok Turki, Christophe Sauvey, Nathalie Sauer

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

A computer-aided system for multi-gate gating-system design for die-casting dies

Ranjit Singh, Jatinder Madan

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Effects of forming parameters on microstructure and mechanical properties of a cup-shaped Mg–8.20Gd–4.48Y–3.34Zn–0.36Zr alloy sample manufactured by thixoforming

Zong-Yao Xie, Yan Tian, Qian Li, Jian-Cheng Zhou, Yi Meng

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Investigation on wear modes and mechanisms of abrasive belts in grinding of U71Mn steel

Zhe He, Jianyong Li, Yueming Liu, Jiwang Yan

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Modeling of surface topography based on cutting vibration in ball-end milling of thin-walled parts

Zhenhua Wang, Boxiang Wang, Juntang Yuan

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Analysis of deposition sequence in tool-path optimization for low-cost material extrusion additive manufacturing

Neri Volpato, Thiago Tavares Zanotto

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Soft abrasive flow polishing based on the cavitation effect

Shiming Ji, Huiqiang Cao, Jun Zhao, Ye Pan, Enyong Jiang

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Research on cavitation involved in ultrasonic-assisted abrasive waterjet machining

Zhe Lv, Rongguo Hou, Tao Wang, Chuanzhen Huang, Hongtao Zhu

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Mediation analysis of multiple constructs in the relationship between manufacturing and technology and environmental constructs in structural equation model for sustainable manufacturing

Keshav Valase, D. N. Raut

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Multi-objective optimization of mechanical quality and stability during micro resistance spot welding

Feng Chen, Yusheng Wang, Shiding Sun, Zhenwu Ma, Xiang Huang

26-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

A novel feedrate planning and interpolating method for parametric toolpath in Frenet-Serret frame

Peiqing Ye, Yong Zhang, Jianxin Xiao, Mingyong Zhao, Hui Zhang

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Performance assessment in order picking systems: a visual double cross-analysis

Riccardo Manzini, Riccardo Accorsi, Giulia Baruffaldi, Daniele Santi, Alessandro Tufano

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Multiobjective approach for deteriorating jobs scheduling for a sustainable manufacturing system

Meriem Tigane, Mohammed Dahane, Mourad Boudhar

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Interlayer fracture energy of 3D-printed PLA material

Hadi Noori

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019 Open Access

Robust vision-based joint tracking for laser welding of curved closed-square-butt joints

Morgan Nilsen, Fredrik Sikström, Anna-Karin Christiansson, Antonio Ancona

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Loading path optimization of T tube in hydroforming process using response surface method

Feng Ying-ying, Zhang Hong-ge, Luo Zong-an, Wu Qing-lin

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Inverse material modeling and optimization of free-cutting steel with graphite inclusions

Mansur Akbari, Darko Smolenicki, Hans Roelofs, Konrad Wegener

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Micro-holes EDM of superalloy Inconel 718 based on a magnetic suspension spindle system

Yerui Feng, Yongfeng Guo, Zebin Ling, Xiaoyou Zhang

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Conceptual design, control, and simulation of a 5-DoF robotic manipulator for direct additive manufacturing on the internal surface of radome systems

Stanislao Grazioso, Manuele Di Maio, Giuseppe Di Gironimo

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Evaluation of the superabsorbent coolant as a new approach to semi-dry machining

Yousef Shokoohi, José Mario Paiva, German Fox-Rabinovich, Carlos Alberto Schuch Bork, Stephen Clarence Veldhuis

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Narrow-seam identification and deviation detection in keyhole deep-penetration TIG welding

Baori Zhang, Yonghua Shi, Shengyong Gu

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Hafnium and vanadium nitride multilayer coatings [HfN/VN]n deposited onto HSS cutting tools for dry turning of a low carbon steel: a tribological compatibility case study

J. H. Navarro-Devia, C. Amaya, J. C. Caicedo, J. H. Martínez, W. Aperador

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Investigation on machining performance of micro-holes EDM in ZrB2-SiC ceramics using a magnetic suspension spindle system

Yerui Feng, Yongfeng Guo, Zebin Ling, Xiaoyou Zhang

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Ultra-precision grinding machine design and application in grinding the thin-walled complex component with small ball-end diamond wheel

Tingzhang Wang, Jian Cheng, Henan Liu, Mingjun Chen, Chunya Wu, Dingning Su

27-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Toolpath generation for the manufacture of metallic components by means of the laser metal deposition technique

Jon Flores, Iker Garmendia, Joseba Pujana

28-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019 Open Access

Monitoring and evaluation of the wire drawing process using thermal imaging

Joakim Larsson, Anton Jansson, Patrik Karlsson

28-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Strong noise image processing for vision-based seam tracking in robotic gas metal arc welding

Rongqiang Du, Yanling Xu, Zhen Hou, Jun Shu, Shanben Chen

28-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Modeling and experiment study on inter-electrode gap in electrochemical machining with a floating cathode for rotary parts

Guibing Pang, Kaikai Xin, Fanling Bu, Teng Gao

28-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Prediction of core deflection in wax injection for investment casting by using SVM and BPNN

Donghong Wang, Jinyu Sun, Anping Dong, Guoliang Zhu, Shumei Liu, Haijun Huang, Da Shu

28-11-2018 | ORIGINAL ARTICLE | Issue 5-8/2019

Numerical simulation and experiment research on forming of two-step channel based on rubber pad pressing

Wang Hongyu, Wei Zhen, Teng Fei, Zhang Pengchao, Sun Juncai, Ji Shijun

Current Publications

Premium Partner

    Image Credits