Top

Wireless Personal Communications

Published in:

07-02-2018

The Joint Board Cable Foundation Ultimate Pullout Resistance Formula Derivation and Aided Program Design

Authors: Yiping Luo, Yongjie Deng, Guobing Xue, Xiaochun Lu

Published in: Wireless Personal Communications | Issue 4/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

As a new type of transmission line foundation developed by the author, joint board cable foundation has obtained an invention patent and has a good application in the transmission tower foundation of thick collapsible loess regions. The research on the ultimate tensile strength of the base plate will be the key to carry on this design. In order to do a better job in the general design of the base plate, the author starts with the research on the uplift resistance theory of joint board cable foundation, who has put forward uplift resistance theory of joint board cable foundation formula, simplified the formula, and derived the calculation formula of the uplift stability of joint board cable foundation. The author has calculated dimensionless coefficient by self-compiled program and has studied on the rationality of the simplified calculation formula. The results from the study indicate that the calculation formula of the uplift stability of joint board cable foundation is easy to use, dimensionless coefficient can be derived through using chinese procedure, the formula reduces the computational difficulty of lower plate uplift resistance, the rationality and accuracy of the formula are proved through the research on the rationality of the simplified formula.

previous article Cost Optimization Control of Logistics Service Supply Chain Based on Cloud Genetic Algorithm

next article Multi Model Mitigation Approach for Network Threats on Cluster Based Linear Chain Routing Protocol in Wireless Sensor Networks at QoS Development

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Wang, D., Hu, Y., & Randolpf, M. F. (2010). Three-dimensional large deformation finite-element analysis of plate anchors in uniform clay. Journal of Geotechnical and Geoenvironmental Engineering, 136(2), 355–365.CrossRef

Wang, D., Hu, Y., & Randolpf, M. F. (2011). Keying of rectangular plate anchors in normally consolidated clays. Journal of Geotechnical and Geoenvironmental Engineering, 137(12), 1244–1253.CrossRef

Chen, C. F., Tang, Y., & Liang, G. (2016). Elastic-plastic analysis for bolts in ground with shear modulus increasing following an exponential function with depth. Journal of Central South University (Science and Technology), 47(3), 905–912.

Deng, X. F., Wu, J., Liang, C., Chen, S. Q., & He, H. S. (2016). A numerical study on determination of the deformation modulus of soil based on pull-out test of uplift-pile. Chinese Journal of Underground Space and Engineering, 12(1), 77–83.

Song, Z., Hu, Y., & Randolph, M. F. (2008). Numerical simulation of vertical pullout of plate anchors in clay. Journal of Geotechnical and Geoenvironmental Engineering, 134(6), 866–875.CrossRef

Sun, X., Yang, M., & Mo, H. (2008). Displacement of base-enlarged tension piles caculated by load transfer method. Chinese Journal of Geotechnical Engineering, 30(12), 1815–1820.

Xiaoli, S., & Haihong, M. (2009). An analytical calculation method for displacement of under-reamed tension piles. Chinese Journal of Rock Mechanics and Engineering, 35, 3008–3014.

Murray, E. J., & Geddes, J. D. (1987). Uplift of anchor plates in sand. Journal of Geotechnical Engineering, 113, 202–215.CrossRef

Huang, M., & Yu, S. (2013). Pull-out capacity of strip anchor plate in sand based on block set mechanism. Chinese Journal of Geotechnical Engineering, 35(2), 201–207.

10.

Long, Yu., Jun, L., & Xianjing, K. (2007). Stability of plate anchors in NC clay. Rock and Soil Mechanics, 28(7), 1427–1434.

11.

Ilamparuthi, K., Dickin, E. A., & Muthukrishnaiah, K. (2002). Experimental investigation of the uplift behavior of circular plate anchors embedded in sand. Canadian Geotechnical Journal, 39, 648–664.CrossRef

12.

Xuefeng, F., Zhe, L., & Zhixin, Y. (2014). Vertical uplift capacity of combined cable-slab foundation in loess and influencing factors. Science & Technology Review, 32(36), 86–92.

13.

Meryerhof, G. G., & Adams, J. I. (1968). The ultimate uplift capacity of foundations. Canadian Geotechnical Journal, 5, 224–225.

14.

Dickin, E. A., & Leung, C. F. (1990). Performance of piles with enlarged bases subject to uplift forces. Canadian Geotechnical Journal, 27, 546–556.CrossRef

15.

Rao, K. S. S., & Kumar, J. (1994). Vertical uplift capacity of horizontal anchors. Journal of Geotechnical Engineering, 7, 1134–1147.CrossRef

16.

Lianheng, Z., Qiang, L., Liang, L., & Hancheng, D. (2009). Ultimate pullout capacity of horizontal rectangular plate anchors. Chinese Journal of Geotechnical Engineering, 31(9), 1414–1420.

17.

Nianwu, L., Zhongmiao, Z., Qianqing, Z., et al. (2013). Destructive field tests on mobilization of end resistance of cast-in situ bored piles. Journal of Central South University of Technology, 20(4), 1071–1078.CrossRef

18.

Huang, M., Zhou, Z., & Ou, J. (2014). Nonlinear analysis on load transfer mechanism of wholly grouted anchor rod along anchoring section. Chinese Journal of Rock Mechanics and Engineering, 33(2), 3992–3997.

19.

Hui, W., Yuan-cheng, G., & Yan-qing, W. (2015). Establishment of energy equation for composite support system of prestressed anchors and soil nails based on simplified model. Railway Engineering, 9, 82–85.

Title: The Joint Board Cable Foundation Ultimate Pullout Resistance Formula Derivation and Aided Program Design
Authors: Yiping Luo
Yongjie Deng
Guobing Xue
Xiaochun Lu
Publication date: 07-02-2018
Publisher: Springer US
Published in: Wireless Personal Communications / Issue 4/2018
Print ISSN: 0929-6212
Electronic ISSN: 1572-834X
DOI: https://doi.org/10.1007/s11277-018-5345-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 4/2018

Pseudo Symmetric Solutions to Two Classes of BVPs

Research on the Chinese Industrialized Construction Migrant Workers from the Perspective of Complex Adaptive System: Combining the Application of SWARM Computer Simulation Technology

Tourists Initial Optimal Shunt Scheme Using Multi-objective Genetic Algorithm

Logistics Terminal Distribution Mode and Path Optimization Based on Ant Colony Algorithm

A FOA-Optimized RBF Algorithm-Based Evaluation Research on E-commerce Websites

Queuing Strategy Optimization with Restricted Service Resources