Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Material Cycles and Waste Management
Published in: Journal of Material Cycles and Waste Management 1/2020

23-10-2019 | ORIGINAL ARTICLE

The usage of novel acrylic-modified water-reducible alkyd resin obtained from post-consumer PET bottles in water-based paint formulation

Authors: Özge Naz Büyükyonga, Nagihan Akgün, Işıl Acar, Gamze Güçlü

Published in: Journal of Material Cycles and Waste Management | Issue 1/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Glycolysis reactions of waste polyethylene terephthalate (PET) flakes obtained from post-consumer water bottles were carried out at 220–250 °C using diethylene glycol, dipropylene glycol and triethylene glycol, and molar ratios of PET/glycol in the glycolysis reactions were chosen to be 1/3. The obtained glycolysis products were used in the synthesis of medium-oil acrylic-modified water-reducible alkyd resins. Acrylic modification was carried out using methacrylic acid–maleic acid copolymer synthesized in our laboratory. The structure of the acrylic copolymer was investigated with FTIR analysis. Films of the modified alkyd resins were prepared and their physical and chemical surface coating properties were investigated. When surface coating test results were evaluated, it was observed that waste PET had no adverse effect on these properties of acrylic-modified water-reducible alkyd resins. Then, two water-based paints were prepared using PET-based acrylic-modified water-reducible alkyd resin and reference acrylic-modified water-reducible alkyd resin as binder. Wet paint properties and physical/chemical dry film properties of paints were determined. When the physical surface coating test results were evaluated, no difference was observed between the properties of both paints. If we evaluate the results of chemical surface coating properties, the hot water and alkali resistance of waste PET-based paint was considerably higher than the reference resin.
previous article Microwave gasification and oxy-steam combustion for using the biomass char
next article On the use of grains recovered from spent vitrified wheels in resinoid applications

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
La Mantia F (2002) Handbook of plastic recycling. Rapra Technology Limited Press, London
2.
Karayannidis GP, Achilias DS (2007) Chemical recycling of poly(ethylene terephthalate). Macromol Mater Eng 292:128–146
3.
Tuna Ö, Bal A, Güçlü G (2013) Investigation of the effect of hydrolysis products of postconsumer polyethylene terephthalate bottles on the properties of alkyd resins. Polym Eng Sci 53:176–182
4.
Çam Ç, Bal A, Güçlü G (2015) Synthesis and film properties of epoxy esters modified with amino resins from glycolysis products of postconsumer PET bottles. Polym Eng Sci 55:2519–2525
5.
Paszun D, Spychaj T (1997) Chemical Recycling of Poly(ethylene terephthalate). Ind Eng Chem Res 36:1373–1383
6.
Farahat MS (2002) Mechanical characteristics of modified unsaturated polyester resins derived from poly(ethylene terephthalate) waste. Polym Int 51:183–189
7.
Sinha V, Patel MR, Patel JV (2010) Pet waste management by chemical recycling: a review. J Polym Environ 18:8–25
8.
Nikles DE, Farahat MS (2005) New motivation for the depolymerization products derived from poly(ethylene terephthalate) (PET) waste: a review. Macromol Mater Eng 290:13–30
9.
Chen CH (2003) Study of glycolysis of poly(ethylene terephthalate) recycled from postconsumer soft-drink bottles. III. Further investigation. J Appl Polym Sci 87:2004–2010
10.
11.
Acar I, Bal A, Güçlü G (2013) The effect of xylene as aromatic solvent to aminoglycolysis of post consumer PET bottles. Polym Eng Sci 53:2429–2438
12.
Güçlü G (2010) Alkyd resins based on waste PET for water-reducible coating applications. Polym Bull 64:739–748
13.
Tukker A (2002) Plastics waste feedstock recycling, chemical recycling and incineration. In: Humphreys S (ed) Rapra review reports, vol 13(4). Rapra Technology Limited Press, UK
14.
Scheirs J (2001) Polymer recycling. Wiley, Chichester
15.
Güçlü G, Kaşgöz A, Özbudak S, Özgümüş S, Orbay M (1998) Glycolysis of poly(ethylene terephthalate) wastes in xylene. J Appl Polym Sci 69:2311–2319
16.
Chen JW, Chen LW, Cheng WH (1999) Kinetics of glycolysis of polyethylene terephthalate with zinc catalyst. Polym Int 48:885–888
17.
Karayannidis GP, Chatziavgoustis AP, Achilias DS (2002) Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid by alkaline hydrolysis. Adv Polym Technol 21:250–259
18.
Güçlü G, Yalçınyuva T, Özgümüş S, Orbay M (2003) Hydrolysis of waste polyethylene terephthalate and characterization of products by differential scanning calorimetry. Thermochim Acta 404:193–205
19.
Yoshioka T, Motoki T, Okuwaki A (2001) Kinetics of hydrolysis of poly(ethylene terephthalate) powder in sulfuric acid by a modified shrinking-core model. Ind Eng Chem Res 40:75–79
20.
Shamsi R, Abdouss M, Sadeghi GMM, Taromi FA (2009) Synthesis and characterization of novel polyurethanes based on aminolysis of poly(ethylene terephthalate) wastes, and evaluation of their thermal and mechanical properties. Polym Int 58:22–30
21.
Spychaj T, Fabrycy E, Spychaj S, Kacperski M (2001) Aminolysis and aminoglycolysis of waste poly(ethylene terephthalate). J Mater Cycles Waste Manag 3:24–31
22.
Bulak E, Acar I (2014) The use of aminolysis, aminoglycolysis, and simultaneous aminolysis-hydrolysis products of waste PET for production of paint binder. Polym Eng Sci 54:2273–2281
23.
Acar I, Orbay M (2011) Aminoglycolysis of waste poly(ethylene terephthalate) with diethanolamine and evaluation of the products as polyurethane surface coating materials. Polym Eng Sci 51:746–754
24.
Güçlü G, Yalçınyuva T, Özgümüş S, Orbay M (2003) Simultaneous glycolysis and hydrolysis of polyethylene terephthalate and characterization of products by differential scanning calorimetry. Polymer 44:7609–7616
25.
Torlakoğlu A, Güçlü G (2009) Alkyd-amino resins based on waste pet for coating applications. Waste Manag 29:350–354
26.
Öztürk Y, Güçlü G (2004) Unsaturated polyester resins obtained from glycolysis products of waste PET. Polym Plast Technol Eng 43:1539–1552
27.
Güçlü G, Orbay M (2009) Alkyd resins synthesized from postconsumer PET bottles. Prog Org Coat 265:362–365
28.
Ertaş K, Güçlü G (2005) Alkyd resins synthesized from glycolysis products of waste PET. Polym Plast Technol Eng 44:783–794
29.
Acar I, Bal A, Güçlü G (2013) The use of intermediates obtained from aminoglycolysis of waste poly(ethylene terephthalate) (PET) for the synthesis of water-reducible alkyd resin. Can J Chem 91:357–363
30.
Bal K, Ünlü KC, Acar I, Güçlü G (2017) Epoxy-based paints from glycolysis products of postconsumer PET bottles: synthesis, wet paint properties and film properties. J Coat Technol Res 14:747–753
31.
Austin GT (1988) Shreve’s chemical process industries, 5th edn. McGraw-Hill Book Company, Press, Singapore
32.
Bal A, Acar I, Güçlü G, İyim TB (2012) Effects of organo clay on film properties of alkyd-phenol formaldehyde resins. Pigm Resin Technol 41:100–103
33.
Bal A, Acar I, İyim TB, Güçlü G (2013) A novel type of organo clay containing alkyd-melamine formaldehyde resins. Int J Polym Mater Polym Biomater 262:309–313
34.
Bal A, Güçlü G, Acar I, İyim TB (2010) Effects of urea formaldehyde resin to film properties of alkyd-melamine formaldehyde resins containing organo clay. Prog Org Coat 68:363–365
35.
Akgün N, Büyükyonga ÖN, Acar I, Güçlü G (2016) Synthesis of novel acrylic modified water reducible alkyd resin: investigation of acrylic copolymer ratio effect on film properties and thermal behaviors. Polym Eng Sci 56:947–954
36.
Büyükyonga ÖN, Akgün N, Acar I, Güçlü G (2017) Synthesis of four-component acrylic-modified water-reducible alkyd resin: investigation of dilution ratio effect on film properties and thermal behaviors. J Coat Technol Res 14:117–128
37.
Tahmaz M, Acar I, Güçlü G (2015) Synthesis and film properties of long oil alkyd resin/organo clay nanocomposite coatings. Res Chem Intermed 41:27–42
38.
Kurt İ, Acar I, Güçlü G (2014) Preparation and characterization of water reducible alkyd resin/colloidal silica nanocomposite coatings. Prog Org Coat 77:949–956
39.
Yousefi AA, Pishvaei M, Yousefi A (2011) Preparation of water-based alkyd/acrylic hybrid resins. ProgColor Color Coat 4:15–25
40.
Dhoke SK, Sinha TJM, Dutta P, Khanna AS (2008) Formulation and performance study of low molecular weight, alkyd-based waterborne anticorrosive coating on mild steel. Prog Org Coat 62:183–192
41.
Nakayama Y (1998) Polymer blend systems for water-borne paints. Prog Org Coat 33:108–116
42.
Akbarinezhad E, Ebrahimi M, Kassiriha SM, Khorasani M (2009) Synthesis and evaluation of water-reducible acrylic-alkyd resins with high hydrolytic stability. Prog Org Coat 65:217–221
43.
Farah S, Kunduru KR, Basu A, Domb AJ (2015) Molecular weight determination of polyethylene terephthalate. In: Poly(ethylene terephthalate) based blends, composites and nanocomposites. William Andrew Publishing, New York, pp 143–165
44.
Awaja F, Pavel D (2005) Recycling of PET. Eur Polym J 41:1453–1477
45.
Welcher FC (1975) Standard method of chemical analysis. R. E. Krieger Pub. Co., Press: New York
46.
Patton TC (1962) Alkyd resin technology. Wiley, New York
47.
Mizutani T, Arai K, Miyamoto M, Kimura Y (2006) Application of silica-containing nano-composite emulsion to wall paint: a new environmentally safe paint of high performance. Prog Org Coat 55:276–283
48.
Silverstein RM, Bassler GC (1966) Spectrometric identification of organic compounds. Wiley, New York
Metadata
Title
The usage of novel acrylic-modified water-reducible alkyd resin obtained from post-consumer PET bottles in water-based paint formulation
Authors
Özge Naz Büyükyonga
Nagihan Akgün
Işıl Acar
Gamze Güçlü
Publication date
23-10-2019
Publisher
Springer Japan
Published in
Journal of Material Cycles and Waste Management / Issue 1/2020
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI
https://doi.org/10.1007/s10163-019-00929-y

Other articles of this Issue 1/2020

Journal of Material Cycles and Waste Management 1/2020 Go to the issue

ORIGINAL ARTICLE

Mechanical behavior and constitutive relationship of the three types of recycled coarse aggregate concrete based on standard classification

ORIGINAL ARTICLE

Material and moisture balance in a full-scale bio-drying MBT system for solid recovered fuel production

ORIGINAL ARTICLE

On the use of grains recovered from spent vitrified wheels in resinoid applications

ORIGINAL ARTICLE

NOx scrubbing with H2O2/HNO3 solutions achieved with a laboratory bubble contactor

ORIGINAL ARTICLE

Analysis of the comprehensive management of sewage sludge in Poland

ORIGINAL ARTICLE

Microwave gasification and oxy-steam combustion for using the biomass char