Top

Metallurgist

Published in:

01-03-2015

Three-Dimensional Mathematical (Dynamic) Model of the Sintering Process. Part I

Published in: Metallurgist | Issue 11-12/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A three-dimensional mathematical (dynamic) model is presented to describe the sintering process. The model was developed to solve theoretical and practical problems. It allows real-time determination of the dynamic distribution of the temperature and chemical composition of the charge, the melt, the sinter cake, and the gas in the bed with allowance for transients, as well as the temperatures in the pallets and the parameters of the gas flow in the flue channel – including air infiltration.

previous article Problems with Waste Generation and Recycling in the Ferroalloys Industry

next article Maximizing the Use of Pulverized-Coal Fuel in the Blast-Furnace Shop at the Mariupol Metallurgical Combine

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H. B. Wendeborn, “Symposium on Sinter,” Spec. Rep. Iron and Steel Inst., No. 53, 1–9 (1955).

E. W. Voice and R. Wild, Second Symp. Inter. sur l’agglomeration des minerais de fer. IRSID, Paris (1957), pp. 7–30.

A. Anzelius, Z. Angew. Math. Mech., 6, No. 1, 291–298 (1926).CrossRef

T. Schuman, J. of the Franklin Inst., 208, 425–426 (1929).CrossRef

S. G. Bratchikov, S. V. Bazilevich,Yu. G. Yaroshenko, and G. M. Maizel, Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No. 6, 18–26 (1963).

Yu. A. Frolov, “Heat-engineering aspects of the sintering process,” Stal, No. 12, 2–11 (2003).

F. R. Shklyar, V. M. Malkin, B. A. Bokovikov, et al., Metallurgical Heat Engineering: Sci. Works of VNIIMT, Metallurgiya, Moscow (1979), No. 8, pp. 119–127.

M. J. Cumming and J. A. Thurlby, “Developments in modeling and simulation of iron ore sintering,” Ironmak. Steelmak., 17, No. 4, 245–254 (1990).

N. K. Nath, A. J. Silva, and N. Chakraborti, “Dynamic process modeling of iron ore sintering,” Steel Res., 68, No. 7, 285–292 (1977).

10.

J. Mitterlehner et al., “Modeling and simulation of heat front propagation in the iron ore sintering process,” ISIJ Int., No. 44, 11–20 (2004).

11.

H. Yamaoka and T. Kawaguchi, “Development of a 3D sinter process mathematical simulation model,” ISIJ Int., No. 45, 522–531 (2005).

12.

J. A. Castro, A. J. Silva, H. Nogami, and J. Yagi, “Modelo matematico tridimensional multifasico da geraciro de dioxinas no leito de sinterizaciro,” TMM – Tecnol. Metal. Mater., No. 2, 45–49 (2005).

13.

J. A. Castro, Y. Sasaki, and J. Yagi, “Three dimensional mathematical model of the iron ore sintering process based on multiphase theory,” Mater. Res., No. 15, 848–858 (2012).

14.

Yu. A. Frolov, L. I. Polotskii, V. A. Kobelev, and V. V. Konoplyanik, “Three dimensional dynamic model of the sintering process,” Chern. Metall.: Byull. NTiEI, No. 11, 29–30 (2005).

Title: Three-Dimensional Mathematical (Dynamic) Model of the Sintering Process. Part I
Publication date: 01-03-2015
Published in: Metallurgist / Issue 11-12/2015
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-015-0042-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2015

Developing Software for the Feed-Control Systems of High-Power Aluminum Reduction Cells

Use of a Round Continuous-Cast Billet for the Production of Rolled Sections

Principles of Predicting Temperature and Concentration Dependences of Surface Tension for Molten Metallurgical Slags of the CaO–Al2O3–CaF2 System

Methods of Processing Ores from the Udokan Deposit

Increasing the Efficiency of the Impregnation of Coke with Pitch in the Production of Anode Paste for Aluminum Cells

Intensifying the Cleaning of Emulsion- and Oil-Bearing Waste Water from Rolled-Product Manufacturing by Electroflotation

Premium Partners