Top

Journal of Intelligent Manufacturing

Published in:

01-04-2015

Tool path generation for algebraically parameterized surface

Authors: Subhajit Sarkar, Partha Pratim Dey

Published in: Journal of Intelligent Manufacturing | Issue 2/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In CAD/CAM integrated environment, parametrically defined free-form surfaces may require to be truncated to suit the profile of an object to be machined. In such a case the truncated surface needs to be parameterized anew according to the boundaries. Bilinear Coons parameterization is a well known algebraic method which can be used for generating boundary-fitted iso-parametric curves depending on the boundary information. In this paper an iso-parametric tool path generation scheme has been presented based on Coons parameterization technique for free-form surface. The scheme has been tested on some typical surfaces. Limitations in application of this scheme have also been discussed in this paper.

previous article Estimation of cutting speed in abrasive water jet using an adaptive wavelet neural network

next article RETRACTED ARTICLE: Holistic analysis for task scheduling based on proportional dispatching in hybrid real-time system

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Coons, S. A. (1964). Surfaces for computer-aided design of space figures. MIT ESL, 9442-M-139.

Ding, S., Yang, D. C. H., & Han, Z. (2005). Boundary-conformed machining of turbine blades. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219, 255–263.CrossRef

Elber, G., & Cohen, E. (1994). Toolpath generation for freeform surface models. Computer-Aided Design, 26(6), 490–496.CrossRef

Farin, G. (1988). Curves and surfaces for computer aided geometric design, A practical guide. London: Academic Press Inc.

Faux, I. D., & Pratt, M. J. (1979). Computational geometry for design and manufacture. Chichester: Ellis Horwood.

George, K. K., & Babu, N. R. (1995). On the effective tool path planning algorithms for sculptured surface manufacture. Computers & Industrial Engineering, 28(4), 823–836.CrossRef

Hoffmann, K. A. (1989). Computational fluid dynamics for engineers. Austin: Engineering Education System.

Huang, Y., & Oliver, J. H. (1994). Non-constant parameter NC tool path generation of sculptured surfaces. The International Journal of Advanced Manufacturing Technology, 9, 281–290.CrossRef

Jung, J. Y., & Ahluwalia, R. S. (2005). NC tool path generation for 5-axis machining of free-formed surfaces. Journal of Intelligent Manufacturing, 16, 115–127.CrossRef

Lasemi, A., Xue, D., & Gu, P. (2010). Recent development in CNC machining of freeform surfaces: A state-of-the-art review. Computer-Aided Design, 42, 641–654.CrossRef

Li, C. L. (2007). A geometric approach to boundary-conformed tool path generation. Computer-Aided Design, 39, 941–952.CrossRef

Li, H., & Feng, H. Y. (2002). Constant scallop-height tool path generation for three axis sculpture surface machining. Computer-Aided Design, 34, 647–654.CrossRef

Loney, G. C., & Ozsoy, T. M. (1987). NC machining of free form surfaces. Computer Aided Design, 19(2), 85–90.CrossRef

Marsh, D. (2005). Applied geometry for computer graphics and CAD. London: Springer.

Mortenson, M. E. (1985). Geometric modeling. London: Wiley.

Sarkar, S., & Dey, P. P. (2012a). Construction of 2-D parametric surfaces bounded with four irregular curves. International Journal of Computer Aided Engineering and Technology, 4(5), 474–487.CrossRef

Sarkar, S., & Dey P. P. (2012b). A new boundary interpolation technique for parameterisation of planar surfaces with four arbitrary boundary curves. Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406212460355.

Smith, R. E. (1983). Three-dimensional algebraic grid generation, AIAA 6th computational fluid dynamics conference. Massachusetts: Danvers.

Stoker, J. J. (1989). Differential geometry. London: Wiley.

Suresh, K., & Yang, D. (1994). Constant scallop-height machining of free-form surfaces. ASME Journal of Engineering for Industry, 116(2), 253–259.CrossRef

Thompson, J. F., Warsi, Z. U. A., & Mastin, C. W. (1985). Numerical grid generation, foundations and applications. North Holland: Elsevier Science Publishing Co, Inc.

Ülker, E., Turanalp, M. E., & Halkaci, H. S. (2009). An artificial immune system approach to CNC tool path generation. Journal of Intelligent Manufacturing, 20, 67–77.CrossRef

Wang, C. C. L., & Tang, K. (2004). Algebraic grid generation on trimmed parametric surface using non-self-overlapping Coons patch mapping. International Journal for Numerical Methods in Engineering, 60(7), 1259–1286.CrossRef

Yamaguchi, F. (1988). Curves and surfaces in computer aided geometric design. Berlin: Springer.CrossRef

Zhang, L. P., Nee, A. Y. C., & Fuh, J. Y. H. (2004). An efficient CC-curve tool path regeneration algorithm for sculptured surface machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218, 389–402.CrossRef

Title: Tool path generation for algebraically parameterized surface
Authors: Subhajit Sarkar
Partha Pratim Dey
Publication date: 01-04-2015
Publisher: Springer US
Published in: Journal of Intelligent Manufacturing / Issue 2/2015
Print ISSN: 0956-5515
Electronic ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-013-0799-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2015

Sequence planning for stamping operations in progressive dies

Choosing reverse channels under collection responsibility sharing in a closed-loop supply chain with re-manufacturing

The two stage assembly flowshop scheduling problem to minimize total tardiness

Optimization of drilling parameters using Taguchi technique and response surface methodology (RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills

RETRACTED ARTICLE: Holistic analysis for task scheduling based on proportional dispatching in hybrid real-time system

Operating load based real-time rolling grey forecasting for machine health prognosis in dynamic maintenance schedule

Premium Partners