Skip to main content
Top
Published in: European Journal of Wood and Wood Products 5/2012

01-09-2012 | Originals Originalarbeiten

Tool recession in the processing of window scantling with innovative core materials

Authors: Ali Fathollahzadeh, Frieder Scholz, Thomas Keller

Published in: European Journal of Wood and Wood Products | Issue 5/2012

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Three layer laminated lumber is extensively used in the manufacture of window frames. The insulating capacity is an important factor. Some producers are trying to expand the market and have introduced novel scantlings with higher insulating capacities into the market. The core layer of these scantlings was replaced by new materials. The three types are pressed cork, Polyurethane and Purenit. In this study the wear effects of wood scantling with new core layers on the recession of blades was studied. Four different types of tungsten carbide blades with different grain sizes (normal, fine, super fine and diamond coated) were used. Results show that Purenit is the most abrasive material for blades. The glue line is also a source of destruction for blades. The authors suggest that super fine coated blade is the best type for machining wood-Purenit scantling. The two other scantlings can be machined with normal grain coated carbide blade without difficulties.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference Bayoumi AE, Stewart JS, Bailey JA (1988) The effects of cemented carbide binder composition on tool wear encountered in surfacing green lumber. Wood Fiber Sci 20(4):457–476 Bayoumi AE, Stewart JS, Bailey JA (1988) The effects of cemented carbide binder composition on tool wear encountered in surfacing green lumber. Wood Fiber Sci 20(4):457–476
go back to reference Brooks RD (1951) Care and maintenance of carbide wood working tools. J For Prod Res Soc 1(1):57–60 Brooks RD (1951) Care and maintenance of carbide wood working tools. J For Prod Res Soc 1(1):57–60
go back to reference Bustos CA, Moya CL, Lisperguer JM, Viveros EM (2010) Effect of knife wear on the glue ability of planed surfaces of radiate pine. Wood Fiber Sci 42(2):185–191 Bustos CA, Moya CL, Lisperguer JM, Viveros EM (2010) Effect of knife wear on the glue ability of planed surfaces of radiate pine. Wood Fiber Sci 42(2):185–191
go back to reference Crump H (1948) Maintenance and operating practices for tungsten carbide tools. J For Prod Res Soc 2:201–214 Crump H (1948) Maintenance and operating practices for tungsten carbide tools. J For Prod Res Soc 2:201–214
go back to reference Duff KW (1958) Carbide wood cutting tools. For Prod J 8(5):33A–36A Duff KW (1958) Carbide wood cutting tools. For Prod J 8(5):33A–36A
go back to reference Gisip J, Gazo R, Stewart HA (2007) Effects of refrigerated air on tool wear. Wood Fiber Sci 39(3):443–449 Gisip J, Gazo R, Stewart HA (2007) Effects of refrigerated air on tool wear. Wood Fiber Sci 39(3):443–449
go back to reference ift Rosenheim (2008) Holzbau der Zukunft. In: Teilprojekt 20 Konstruktionsgrundlagen für Fenster-, Türen- und Fassadenelemente aus Verbundwerkstoffen und Holz–Teil 2. Bayerische Staatsministerium für Wissenschaft, Forschung und Kunst im Rahmen der High Tech Offensive Bayern ift Rosenheim (2008) Holzbau der Zukunft. In: Teilprojekt 20 Konstruktionsgrundlagen für Fenster-, Türen- und Fassadenelemente aus Verbundwerkstoffen und Holz–Teil 2. Bayerische Staatsministerium für Wissenschaft, Forschung und Kunst im Rahmen der High Tech Offensive Bayern
go back to reference Kalish HS (1973) Some plain talk about carbides. Manuf Eng Manage 71(1):28–31 Kalish HS (1973) Some plain talk about carbides. Manuf Eng Manage 71(1):28–31
go back to reference Kirbach E, Chow S (1976) Chemical wear of tungsten carbide cutting tools by western red cedar. For Prod J 26(3):44–48 Kirbach E, Chow S (1976) Chemical wear of tungsten carbide cutting tools by western red cedar. For Prod J 26(3):44–48
go back to reference Klamecki BE (1979) A review of wood cutting tool wear literature. Holz Roh- Werkst 37(7):265–276 CrossRef Klamecki BE (1979) A review of wood cutting tool wear literature. Holz Roh- Werkst 37(7):265–276 CrossRef
go back to reference Maier G (2000) Holzspanungslehre und werkzeugtechnische Grundlagen. Vogel publication, Würzburg, pp 110–115. ISBN:3-8023-1822-6 Maier G (2000) Holzspanungslehre und werkzeugtechnische Grundlagen. Vogel publication, Würzburg, pp 110–115. ISBN:3-8023-1822-6
go back to reference Reid AS, Stewart HA, Papp RA (1991) High-temperature reactions of tungsten carbide-cobalt tool material with MDF. Forest Prod J Vol. 41, No. 11/12 Reid AS, Stewart HA, Papp RA (1991) High-temperature reactions of tungsten carbide-cobalt tool material with MDF. Forest Prod J Vol. 41, No. 11/12
go back to reference Sellers T Jr, Miller GD, Nieh Li-Shih W (1990) Evaluation of three fillers in PF adhesives used to bond intermediate moisture content plywood: glueline durability and knife wear. For Prod J 40(10):23–28 Sellers T Jr, Miller GD, Nieh Li-Shih W (1990) Evaluation of three fillers in PF adhesives used to bond intermediate moisture content plywood: glueline durability and knife wear. For Prod J 40(10):23–28
go back to reference Sellers T Jr (1989) Knife wear due to filler type in plywood adhesives. For Prod J 39(4):39–41 Sellers T Jr (1989) Knife wear due to filler type in plywood adhesives. For Prod J 39(4):39–41
go back to reference Sellers T Jr, Miller GD, Smith W (2005) Tool wear properties of five extender/fillers in adhesive mixes for plywood. For Prod J 55(3):27–31 Sellers T Jr, Miller GD, Smith W (2005) Tool wear properties of five extender/fillers in adhesive mixes for plywood. For Prod J 55(3):27–31
go back to reference Stewart HA, Shatynski SK, Harbison B, Rabin B (1986) High-temperature corrosion of tungsten carbide from machining medium-density fiberboard. Carbide Tool J, 18(1):2–7 Stewart HA, Shatynski SK, Harbison B, Rabin B (1986) High-temperature corrosion of tungsten carbide from machining medium-density fiberboard. Carbide Tool J, 18(1):2–7
go back to reference Stewart HA (1989) Feasible high-temperature phenomena in tool wear from wood machining. For Prod J 39(3):25–28 Stewart HA (1989) Feasible high-temperature phenomena in tool wear from wood machining. For Prod J 39(3):25–28
go back to reference Weill TC (1958) Cemented tungsten carbides and their application to the woodworking field. For Prod J 8(6):21A–24A Weill TC (1958) Cemented tungsten carbides and their application to the woodworking field. For Prod J 8(6):21A–24A
Metadata
Title
Tool recession in the processing of window scantling with innovative core materials
Authors
Ali Fathollahzadeh
Frieder Scholz
Thomas Keller
Publication date
01-09-2012
Publisher
Springer-Verlag
Published in
European Journal of Wood and Wood Products / Issue 5/2012
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI
https://doi.org/10.1007/s00107-012-0602-2

Other articles of this Issue 5/2012

European Journal of Wood and Wood Products 5/2012 Go to the issue