Skip to main content
main-content
Top

Hint

Swipe to navigate through the articles of this issue

15-03-2021 | ORIGINAL ARTICLE | Issue 1-2/2021

The International Journal of Advanced Manufacturing Technology 1-2/2021

Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites

Journal:
The International Journal of Advanced Manufacturing Technology > Issue 1-2/2021
Authors:
Emine Şap, Usame Ali Usca, Munish Kumar Gupta, Mustafa Kuntoğlu
Important notes

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Abstract

Composites are a unique class of materials extensively used in many modern applications such as aerospace, automobile, and marine applications. However, the high strength and hardness, low thermal expansion, and other physical properties limit its application in machining sector. Therefore, the aim of this study is to investigate the effects of different machining parameters on surface roughness, tool wear, cutting temperature, and chip formation while turning Cu/Mo-SiCp composites. The copper composites reinforced with Mo-SiCp were fabricated with powder metallurgy route and depth of cut (ap), feed rate (fn), and cutting speed (Vc) were selected as the machining parameters. Influence of each parameter was noticed with 3D surface plots and scanning electron microscope observations were used for wear analysis. At the end of the analysis, it was determined that the most important parameter affecting surface roughness, tool wear, and cutting temperature was particle additive ratio. In addition, it was observed that chip types and wear types changed according to increasing reinforcement rates.

Please log in to get access to this content

To get access to this content you need the following product:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Umwelt
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 30 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Umwelt
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 30 Tage kostenlos.

Literature
About this article

Other articles of this Issue 1-2/2021

The International Journal of Advanced Manufacturing Technology 1-2/2021 Go to the issue

Premium Partners

    Image Credits