Skip to main content
Top
Published in:

10-04-2023 | Original Paper

Torque ripple minimization in SRM drive using second-order-generalized-integrator-based FLL equivalent PR current controller

Authors: Manas Ranjan Sial, N. C. Sahoo

Published in: Electrical Engineering | Issue 4/2023

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

A second-order-generalized-integrator (SOGI)-based frequency-locked-loop (FLL) equivalent proportional-resonant (PR) current controller is introduced in this paper to minimize torque ripple in switched reluctance motor (SRM) drive system. The typical cascaded closed-loop speed control of SRM comprises a speed controller giving desired torque, a static look-up table mapping the desired torque to desired/reference phase currents of SRM, and a current controller to track the reference phase currents. It is often seen that conventional current controllers like hysteresis controllers, proportional-integral (PI) controllers, and even intelligent controllers such as fuzzy logic controllers and model predictive direct torque controllers (MPDTC) are not very effective in minimizing the torque pulsations for a wide range of operating scenarios. The proposed SOGI-FLL-PR-based current control strategy is aimed at improving torque control under a wide range of operations of SRM. The performance of the proposed current controller has been compared to that of traditional current controllers like the hysteresis controller, the proportional-integral controller, the fuzzy logic current controller (FLCC), and MPDTC; and has shown to be superior in both simulation and experimental studies. Our study details a systematic approach to the dynamic modeling of SRMs, control strategy formulation, dynamic analysis, and experimental verification.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Appendix
Available only for authorised users
Literature
1.
go back to reference Ding W, Yang S, Yanfang Hu, Li S, Wang T, Yin Z (2017) Design consideration and evaluation of a 12/8 high-torque modular-stator hybrid excitation switched reluctance machine for EV applications. IEEE Trans Ind Electron 64(12):9221–9232CrossRef Ding W, Yang S, Yanfang Hu, Li S, Wang T, Yin Z (2017) Design consideration and evaluation of a 12/8 high-torque modular-stator hybrid excitation switched reluctance machine for EV applications. IEEE Trans Ind Electron 64(12):9221–9232CrossRef
2.
go back to reference Ebrahimi Y, Feyzi MR (2017) Introductory assessment of a novel high-torque density axial-flux switched reluctance machine. IET Electr Power Appl 11(7):1315–1323CrossRef Ebrahimi Y, Feyzi MR (2017) Introductory assessment of a novel high-torque density axial-flux switched reluctance machine. IET Electr Power Appl 11(7):1315–1323CrossRef
3.
go back to reference Mousavi-Aghdam SR, Feyzi MR, Bianchi N, Morandin M (2015) Design and analysis of a novel high-torque stator-segmented SRM. IEEE Trans Ind Electron 63(3):1458–1466CrossRef Mousavi-Aghdam SR, Feyzi MR, Bianchi N, Morandin M (2015) Design and analysis of a novel high-torque stator-segmented SRM. IEEE Trans Ind Electron 63(3):1458–1466CrossRef
4.
go back to reference Castano SM, Bilgin B, Fairall E, Emadi A (2015) Acoustic noise analysis of a high-speed high-power switched reluctance machine: frame effects. IEEE Trans Energy Convers 31(1):69–77CrossRef Castano SM, Bilgin B, Fairall E, Emadi A (2015) Acoustic noise analysis of a high-speed high-power switched reluctance machine: frame effects. IEEE Trans Energy Convers 31(1):69–77CrossRef
5.
go back to reference Gan C, Jianhua Wu, Sun Q, Kong W, Li H, Yihua Hu (2018) A review on machine topologies and control techniques for low-noise switched reluctance motors in electric vehicle applications. IEEE Access 6:31430–31443CrossRef Gan C, Jianhua Wu, Sun Q, Kong W, Li H, Yihua Hu (2018) A review on machine topologies and control techniques for low-noise switched reluctance motors in electric vehicle applications. IEEE Access 6:31430–31443CrossRef
6.
go back to reference Song S, Ge L, Ma S, Zhang M, Wang L (2014) Accurate measurement and detailed evaluation of static electromagnetic characteristics of switched reluctance machines. IEEE Trans Instrum Meas 64(3):704–714CrossRef Song S, Ge L, Ma S, Zhang M, Wang L (2014) Accurate measurement and detailed evaluation of static electromagnetic characteristics of switched reluctance machines. IEEE Trans Instrum Meas 64(3):704–714CrossRef
7.
go back to reference Uddin W, Husain T, Sozer Y, Husain I (2016) Design methodology of a switched reluctance machine for off-road vehicle applications. IEEE Trans Ind Appl 52(3):2138–2147CrossRef Uddin W, Husain T, Sozer Y, Husain I (2016) Design methodology of a switched reluctance machine for off-road vehicle applications. IEEE Trans Ind Appl 52(3):2138–2147CrossRef
8.
go back to reference Hu K-W, Yi P-H, Liaw C-M (2015) An EV SRM drive powered by battery/supercapacitor with G2V and V2H/V2G capabilities. IEEE Trans Industr Electron 62(8):4714–4727CrossRef Hu K-W, Yi P-H, Liaw C-M (2015) An EV SRM drive powered by battery/supercapacitor with G2V and V2H/V2G capabilities. IEEE Trans Industr Electron 62(8):4714–4727CrossRef
10.
go back to reference Rahman KM, Fahimi B, Suresh G, Rajarathnam AV, Ehsani M (2000) Advantages of switched reluctance motor applications to EV and HEV: design and control issues. IEEE Trans Ind Appl 36(1):111–121CrossRef Rahman KM, Fahimi B, Suresh G, Rajarathnam AV, Ehsani M (2000) Advantages of switched reluctance motor applications to EV and HEV: design and control issues. IEEE Trans Ind Appl 36(1):111–121CrossRef
11.
go back to reference Hannoun H, Hilairet M, Marchand C (2010) Design of an SRM speed control strategy for a wide range of operating speeds. IEEE Trans Ind Electron 57(9):2911–2921CrossRef Hannoun H, Hilairet M, Marchand C (2010) Design of an SRM speed control strategy for a wide range of operating speeds. IEEE Trans Ind Electron 57(9):2911–2921CrossRef
12.
go back to reference Mademlis C, Kioskeridis I (2009) Gain-scheduling regulator for high-performance position control of switched reluctance motor drives. IEEE Trans Ind Electron 57(9):2922–2931CrossRef Mademlis C, Kioskeridis I (2009) Gain-scheduling regulator for high-performance position control of switched reluctance motor drives. IEEE Trans Ind Electron 57(9):2922–2931CrossRef
13.
go back to reference Inderka RB, DeDoncker RWAA (2003) DITC-direct instantaneous torque control of switched reluctance drives. IEEE Trans Ind Appl 39(4):1046–1051CrossRef Inderka RB, DeDoncker RWAA (2003) DITC-direct instantaneous torque control of switched reluctance drives. IEEE Trans Ind Appl 39(4):1046–1051CrossRef
14.
go back to reference Islam MS, Anwar MN, Husain I (2003) Design and control of switched reluctance motors for wide-speed-range operation. IEE Proc Electr Power Appl 150(4):425–430CrossRef Islam MS, Anwar MN, Husain I (2003) Design and control of switched reluctance motors for wide-speed-range operation. IEE Proc Electr Power Appl 150(4):425–430CrossRef
15.
go back to reference Bilgin B, Jiang JW, Emadi A (2019) Switched reluctance motor drives fundamentals to applications. CRC Press, USACrossRef Bilgin B, Jiang JW, Emadi A (2019) Switched reluctance motor drives fundamentals to applications. CRC Press, USACrossRef
16.
go back to reference Tsai M-F, Quy TP, Wu B-F, Tseng C-S (2011) Model construction and verification of a BLDC motor using MATLAB/SIMULINK and FPGA control. In: 2011 6th IEEE Conference on Industrial Electronics and Applications, pp 1797–1802. IEEE Tsai M-F, Quy TP, Wu B-F, Tseng C-S (2011) Model construction and verification of a BLDC motor using MATLAB/SIMULINK and FPGA control. In: 2011 6th IEEE Conference on Industrial Electronics and Applications, pp 1797–1802. IEEE
17.
go back to reference Gobbi R, Sahoo NC, Vejian R (2008) Experimental investigations on computer-based methods for determination of static electromagnetic characteristics of switched reluctance motors. IEEE Trans Instrum Meas 57(10):2196–2211CrossRef Gobbi R, Sahoo NC, Vejian R (2008) Experimental investigations on computer-based methods for determination of static electromagnetic characteristics of switched reluctance motors. IEEE Trans Instrum Meas 57(10):2196–2211CrossRef
18.
go back to reference Ye J, Bilgin B, Emadi A (2015) An offline torque sharing function for torque ripple reduction in switched reluctance motor drives. IEEE Trans Energy Convers 30(2):726–735CrossRef Ye J, Bilgin B, Emadi A (2015) An offline torque sharing function for torque ripple reduction in switched reluctance motor drives. IEEE Trans Energy Convers 30(2):726–735CrossRef
19.
go back to reference Xin Z, Lu M, Loh PC, Blaabjerg F (2016) A new second-order generalized integrator based quadrature signal generator with enhanced performance. In: 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp 1–7. IEEE Xin Z, Lu M, Loh PC, Blaabjerg F (2016) A new second-order generalized integrator based quadrature signal generator with enhanced performance. In: 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp 1–7. IEEE
20.
go back to reference Rodríguez P, Luna A, Candela I, Mujal R, Teodorescu R, Blaabjerg F (2010) Multiresonant frequency-locked loop for grid synchronization of power converters under distorted grid conditions. IEEE Trans Ind Electron 58(1):127–138CrossRef Rodríguez P, Luna A, Candela I, Mujal R, Teodorescu R, Blaabjerg F (2010) Multiresonant frequency-locked loop for grid synchronization of power converters under distorted grid conditions. IEEE Trans Ind Electron 58(1):127–138CrossRef
21.
go back to reference Zhao R, Xin Z, Loh PC, Blaabjerg F (2016) A novel flux estimator based on multiple second-order generalized integrators and frequency-locked loop for induction motor drives. IEEE Trans Power Electron 32(8):6286–6296CrossRef Zhao R, Xin Z, Loh PC, Blaabjerg F (2016) A novel flux estimator based on multiple second-order generalized integrators and frequency-locked loop for induction motor drives. IEEE Trans Power Electron 32(8):6286–6296CrossRef
22.
go back to reference De Paula MV, Barros TADS (2021) A sliding mode DITC cruise control for SRM with steepest descent minimum torque ripple point tracking. IEEE Trans Ind Electron 69(1):151–159CrossRef De Paula MV, Barros TADS (2021) A sliding mode DITC cruise control for SRM with steepest descent minimum torque ripple point tracking. IEEE Trans Ind Electron 69(1):151–159CrossRef
23.
go back to reference Barros TADS, Neto PJDS, De Paula MV, Moreira AB, Filho PSN, Filho ER (2018) Automatic characterization system of switched reluctance machines and nonlinear modeling by interpolation using smoothing splines. IEEE Access 6(2018):26011–26021CrossRef Barros TADS, Neto PJDS, De Paula MV, Moreira AB, Filho PSN, Filho ER (2018) Automatic characterization system of switched reluctance machines and nonlinear modeling by interpolation using smoothing splines. IEEE Access 6(2018):26011–26021CrossRef
24.
go back to reference Chen T, Cheng G (2022) Comparative investigation of torque-ripple suppression control strategies based on torque-sharing function for switched reluctance motor. CES Trans Electr Mach Syst 6(2):170–178CrossRef Chen T, Cheng G (2022) Comparative investigation of torque-ripple suppression control strategies based on torque-sharing function for switched reluctance motor. CES Trans Electr Mach Syst 6(2):170–178CrossRef
25.
go back to reference Sun Q, Jianhua Wu, Gan C (2020) Optimized direct instantaneous torque control for SRMs with efficiency improvement. IEEE Trans Ind Electron 68(3):2072–2082CrossRef Sun Q, Jianhua Wu, Gan C (2020) Optimized direct instantaneous torque control for SRMs with efficiency improvement. IEEE Trans Ind Electron 68(3):2072–2082CrossRef
26.
go back to reference Song S, Hei R, Ma R, Liu W (2020) Model predictive control of switched reluctance starter/generator with torque sharing and compensation. IEEE Trans Transp Electrif 6(4):1519–1527CrossRef Song S, Hei R, Ma R, Liu W (2020) Model predictive control of switched reluctance starter/generator with torque sharing and compensation. IEEE Trans Transp Electrif 6(4):1519–1527CrossRef
27.
go back to reference Li W, Cui Z, Ding S, Chen F, Guo Y (2021) Model predictive direct torque control of switched reluctance motors for low-speed operation. IEEE Trans Energy Convers 37(2):1406–1415CrossRef Li W, Cui Z, Ding S, Chen F, Guo Y (2021) Model predictive direct torque control of switched reluctance motors for low-speed operation. IEEE Trans Energy Convers 37(2):1406–1415CrossRef
Metadata
Title
Torque ripple minimization in SRM drive using second-order-generalized-integrator-based FLL equivalent PR current controller
Authors
Manas Ranjan Sial
N. C. Sahoo
Publication date
10-04-2023
Publisher
Springer Berlin Heidelberg
Published in
Electrical Engineering / Issue 4/2023
Print ISSN: 0948-7921
Electronic ISSN: 1432-0487
DOI
https://doi.org/10.1007/s00202-023-01811-9

Other articles of this Issue 4/2023

Electrical Engineering 4/2023 Go to the issue