Skip to main content
Top

2021 | OriginalPaper | Chapter

9. Understanding Fabrication and Properties of Magnesium Matrix Nanocomposites

Authors : Sudip Banerjee, Suswagata Poria, Goutam Sutradhar, Prasanta Sahoo

Published in: Recent Advances in Layered Materials and Structures

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Magnesium-based metal matrix nanocomposites (MMNCs) are new class materials which can be used widely in aerospace, biomedical, electronics and automobile industries due to their low density, sustainability, good specific strength and better tribological properties. Performance of MMNCs depends on several factors, i.e., composition and combination of reinforcement, processing methods, etc. Present study tries to review available literatures to discuss about the role of those factors on mechanical properties, tribological properties and corrosion behaviors of magnesium-based MMNCs. In this study, liquid metallurgy-based primary processing methods and secondary methods are discussed in details with the help of available literatures. Roles of ultrasonic treatment, cavitation and acoustic streaming on distribution of nanoparticles are discussed in details. Strengthening mechanisms between particle and matrix metal are also presented. Effects of particles like Al2O3, SiC, WC, TiB2, CNT on mechanical, tribological and corrosion behavior are discussed. Mechanical properties (UTS, YS, microhardness, creep behavior) are mainly discussed and available literatures revealed that the presence of nanoparticles normally enhance these properties. Literature on tribological behavior yielded that nanoparticles help to enhance wear and friction behavior of Mg-MMNCs at room and elevated temperatures. Effects of tribological parameters (load, sliding speed, sliding distance) are also discussed. But researchers are split into two groups about corrosion characteristics of magnesium composites. Some researchers reported that corrosion resistance is decreased due to presence of reinforcement while others concluded that corrosion resistance is enhanced due to reinforcing particles.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Abdullah A, Malaki M, Baghizadeh E (2012) On the impact of ultrasonic cavitation bubbles. Proc. Inst. Mech. Eng Part C J Mech Eng Sci 226:681–694CrossRef Abdullah A, Malaki M, Baghizadeh E (2012) On the impact of ultrasonic cavitation bubbles. Proc. Inst. Mech. Eng Part C J Mech Eng Sci 226:681–694CrossRef
2.
go back to reference Abdullah A, Pak A, Abdullah MM, Shahidi A, Malaki M (2014) Study of the behavior of ultrasonic piezo-ceramic actuators by simulations. Electron Mater Lett 10:37–42 Abdullah A, Pak A, Abdullah MM, Shahidi A, Malaki M (2014) Study of the behavior of ultrasonic piezo-ceramic actuators by simulations. Electron Mater Lett 10:37–42
3.
go back to reference Akbari MK, Mirzaee O, Baharvandi H (2013) Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method. Mater. Des. 46:199–205CrossRef Akbari MK, Mirzaee O, Baharvandi H (2013) Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method. Mater. Des. 46:199–205CrossRef
4.
go back to reference Aung NN, Zhou W, Goh CS, Nai SML, Wei J (2010) Effect of carbon nanotubes on corrosion of Mg–CNT composites. Corros Sci 52(5):1551–1553CrossRef Aung NN, Zhou W, Goh CS, Nai SML, Wei J (2010) Effect of carbon nanotubes on corrosion of Mg–CNT composites. Corros Sci 52(5):1551–1553CrossRef
5.
go back to reference Banerjee S, Poria S, Sutradhar G, Sahoo P (2019a) Corrosion behavior of AZ31-WC nano-composites. J Magnesium Alloys 7(4):681–695CrossRef Banerjee S, Poria S, Sutradhar G, Sahoo P (2019a) Corrosion behavior of AZ31-WC nano-composites. J Magnesium Alloys 7(4):681–695CrossRef
6.
go back to reference Banerjee S, Poria S, Sutradhar G, Sahoo P (2019b) Tribological behavior of Mg-WC nano-composites at elevated temperature. Mater Res Express 6(8):0865c6 Banerjee S, Poria S, Sutradhar G, Sahoo P (2019b) Tribological behavior of Mg-WC nano-composites at elevated temperature. Mater Res Express 6(8):0865c6
7.
go back to reference Banerjee S, Poria S, Sutradhar G, Sahoo P (2019b) Dry sliding Tribological behavior of AZ31-WC nano-composites. J Magnesium Alloys 7:315–327CrossRef Banerjee S, Poria S, Sutradhar G, Sahoo P (2019b) Dry sliding Tribological behavior of AZ31-WC nano-composites. J Magnesium Alloys 7:315–327CrossRef
8.
go back to reference Bao S, Li L, Hong Y, Hu Z (2010) Study on the fabrication of SiCp/AZ31 nanocomposites by high energy ultrasonic vibration and its characteristics. J Plasticity Eng 1:139–143 Bao S, Li L, Hong Y, Hu Z (2010) Study on the fabrication of SiCp/AZ31 nanocomposites by high energy ultrasonic vibration and its characteristics. J Plasticity Eng 1:139–143
9.
go back to reference Bhingole PP, Chaudhari GP (2012) Synergy of nano carbon black inoculation and high intensity ultrasonic processing in cast magnesium alloys. Mater Sci Eng A 556:954–961CrossRef Bhingole PP, Chaudhari GP (2012) Synergy of nano carbon black inoculation and high intensity ultrasonic processing in cast magnesium alloys. Mater Sci Eng A 556:954–961CrossRef
10.
go back to reference Cao G, Choi H, Oportus J, Konishi H, Li X (2008) Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites. Mater Sci Eng A 494:127–131CrossRef Cao G, Choi H, Oportus J, Konishi H, Li X (2008) Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites. Mater Sci Eng A 494:127–131CrossRef
11.
go back to reference Cao G, Kobliska J, Konishi H, Li X (2008) Tensile properties and microstructure of SiC nanoparticle-reinforced Mg-4Zn alloy fabricated by ultrasonic cavitation-based solidification processing. Metall Mater Trans A 39:880–886CrossRef Cao G, Kobliska J, Konishi H, Li X (2008) Tensile properties and microstructure of SiC nanoparticle-reinforced Mg-4Zn alloy fabricated by ultrasonic cavitation-based solidification processing. Metall Mater Trans A 39:880–886CrossRef
12.
go back to reference Chan WM, Cheng FT, Leung LK, Horylev RJ, Yue TM (1998) Corrosion behavior of magnesium alloy AZ91 and its MMC in NaCl solution. Corros Rev 16(1–2):43–52CrossRef Chan WM, Cheng FT, Leung LK, Horylev RJ, Yue TM (1998) Corrosion behavior of magnesium alloy AZ91 and its MMC in NaCl solution. Corros Rev 16(1–2):43–52CrossRef
13.
go back to reference Chen K, Li ZQ, Zhou HZ, Wang WK (2007) Influence of high intensity ultrasonic vibration on microstructure of in-situ synthesized Mg2Si/Mg composite. T Nonferr Metals Soc 17:s391–s395 Chen K, Li ZQ, Zhou HZ, Wang WK (2007) Influence of high intensity ultrasonic vibration on microstructure of in-situ synthesized Mg2Si/Mg composite. T Nonferr Metals Soc 17:s391–s395
14.
go back to reference Chen LY, Xu JQ, Choi H, Pozuelo M, Ma XL, Bhowmick S, Yang JM, Mathaudhu S, Li XC (2015) Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles. Nature 528:539–543CrossRef Chen LY, Xu JQ, Choi H, Pozuelo M, Ma XL, Bhowmick S, Yang JM, Mathaudhu S, Li XC (2015) Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles. Nature 528:539–543CrossRef
15.
go back to reference Chen LY, Peng JY, Xu JQ et al (2013) Achieving uniform distribution and dispersion of a high percentage of nanoparticles in metal matrix nanocomposites by solidification processing. Scr Mater 69:634–637CrossRef Chen LY, Peng JY, Xu JQ et al (2013) Achieving uniform distribution and dispersion of a high percentage of nanoparticles in metal matrix nanocomposites by solidification processing. Scr Mater 69:634–637CrossRef
16.
go back to reference Choi H, Alba-Baena N, Nimityongskul S et al (2011) Characterization of hot extruded Mg/SiC nanocomposites fabricated by casting. J Mater Sci 46:2991–2997CrossRef Choi H, Alba-Baena N, Nimityongskul S et al (2011) Characterization of hot extruded Mg/SiC nanocomposites fabricated by casting. J Mater Sci 46:2991–2997CrossRef
17.
go back to reference Choi H, Sun Y, Slater BP, Konishi H, Li X (2012) AZ91D/TiB2 Nanocomposites fabricated by solidification nanoprocessing. Adv Eng Mater 14:291–295CrossRef Choi H, Sun Y, Slater BP, Konishi H, Li X (2012) AZ91D/TiB2 Nanocomposites fabricated by solidification nanoprocessing. Adv Eng Mater 14:291–295CrossRef
18.
go back to reference Cicco M, Konishi H, Cao G et al (2009) Strong, ductile magnesium-zinc nanocomposites. Metall Mater Trans A 40A:3038–3045CrossRef Cicco M, Konishi H, Cao G et al (2009) Strong, ductile magnesium-zinc nanocomposites. Metall Mater Trans A 40A:3038–3045CrossRef
19.
go back to reference Dai L, Ling Z, Bai Y (2001) Size-dependent inelastic behavior of particle-reinforced metal–matrix composites. Compos Sci Technol 61:1057–1063CrossRef Dai L, Ling Z, Bai Y (2001) Size-dependent inelastic behavior of particle-reinforced metal–matrix composites. Compos Sci Technol 61:1057–1063CrossRef
20.
go back to reference Dieringa H, Huang Y, Wittke P, Klein M, Walther F, Dikovits M, Poletti C (2013) Compression creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230D. Mater Sci Eng 585:430–438CrossRef Dieringa H, Huang Y, Wittke P, Klein M, Walther F, Dikovits M, Poletti C (2013) Compression creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230D. Mater Sci Eng 585:430–438CrossRef
21.
go back to reference Dieringa H, Katsarou L, Buzolin R, Szakács G, Horstmann M, Wolff M, Mendis C, Vorozhtsov S, StJohn D (2017) Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability. Metals 7:388CrossRef Dieringa H, Katsarou L, Buzolin R, Szakács G, Horstmann M, Wolff M, Mendis C, Vorozhtsov S, StJohn D (2017) Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability. Metals 7:388CrossRef
22.
go back to reference Endo M, Hayashi T, Itoh I, Kim YA, Shimamoto D, Muramatsu H, Shimizu Y, Morimoto S, Terrones M, Iinou S, Koide S (2008) An anticorrosive magnesium/carbon nanotube composite. Appl Phys Lett 92(6):063105 Endo M, Hayashi T, Itoh I, Kim YA, Shimamoto D, Muramatsu H, Shimizu Y, Morimoto S, Terrones M, Iinou S, Koide S (2008) An anticorrosive magnesium/carbon nanotube composite. Appl Phys Lett 92(6):063105
23.
go back to reference Erman A, Groza J, Li X, Choi H, Cao G (2012) Nanoparticle effects in cast Mg-1 wt% SiCnano-composites. Mater Sci Eng A 558:39–43CrossRef Erman A, Groza J, Li X, Choi H, Cao G (2012) Nanoparticle effects in cast Mg-1 wt% SiCnano-composites. Mater Sci Eng A 558:39–43CrossRef
24.
go back to reference Eskin DG, Eskin GI (2014) Ultrasonic treatment of light alloy melts, 2nd edn. CRC Press, Boca Raton, FL, USACrossRef Eskin DG, Eskin GI (2014) Ultrasonic treatment of light alloy melts, 2nd edn. CRC Press, Boca Raton, FL, USACrossRef
25.
go back to reference Eskin GI (1995) Cavitation mechanism of ultrasonic melt degassing. Ultrason Sonochem 2:S137–S141CrossRef Eskin GI (1995) Cavitation mechanism of ultrasonic melt degassing. Ultrason Sonochem 2:S137–S141CrossRef
26.
go back to reference Eskin GI (1998) Ultrasonic treatment of light alloy metallic melts. Gordon and Breach Science Publishers, Amsterdam, The NetherlandsCrossRef Eskin GI (1998) Ultrasonic treatment of light alloy metallic melts. Gordon and Breach Science Publishers, Amsterdam, The NetherlandsCrossRef
27.
go back to reference Falcon LA, Bedolla B, Lemus J, Leon C, Rosales I, Gonzalez-Rodriguez JG (2011) Corrosion behavior of Mg–Al/TiC composites in NaCl solution. Int J Corros Falcon LA, Bedolla B, Lemus J, Leon C, Rosales I, Gonzalez-Rodriguez JG (2011) Corrosion behavior of Mg–Al/TiC composites in NaCl solution. Int J Corros
28.
go back to reference Fukuda H, Szpunar JA, Kondoh K, Chromik R (2010) The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy. Corros Sci 52(12):3917–3923CrossRef Fukuda H, Szpunar JA, Kondoh K, Chromik R (2010) The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy. Corros Sci 52(12):3917–3923CrossRef
29.
go back to reference Funatsu K, Fukuda H, Takei R, Umeda J, Kondoh K (2013) Quantitative evaluation of initial galvanic corrosion behavior of CNTs reinforced Mg–Al alloy. Adv Powder Technol 24(5):833–837CrossRef Funatsu K, Fukuda H, Takei R, Umeda J, Kondoh K (2013) Quantitative evaluation of initial galvanic corrosion behavior of CNTs reinforced Mg–Al alloy. Adv Powder Technol 24(5):833–837CrossRef
30.
go back to reference Ghasali E, Bordbar-Khiabani A, Alizadeh M, Mozafari M, Niazmand M, Kazemzadeh H, Ebadzadeh T (2019) Corrosion behavior and in-vitro bioactivity of porous Mg/Al2O3 and Mg/Si3N4 metal matrix composites fabricated using microwave sintering process. Mater Chem Phys 225:331–339CrossRef Ghasali E, Bordbar-Khiabani A, Alizadeh M, Mozafari M, Niazmand M, Kazemzadeh H, Ebadzadeh T (2019) Corrosion behavior and in-vitro bioactivity of porous Mg/Al2O3 and Mg/Si3N4 metal matrix composites fabricated using microwave sintering process. Mater Chem Phys 225:331–339CrossRef
31.
go back to reference Gnanavelbabu A, Surendran KS, Kumar S (2020) Influence of ultrasonication power on grain refinement, mechanical properties and wear behaviour of AZ91D/nano-Al2O3 composites. Mater Res Express 7(1):016544CrossRef Gnanavelbabu A, Surendran KS, Kumar S (2020) Influence of ultrasonication power on grain refinement, mechanical properties and wear behaviour of AZ91D/nano-Al2O3 composites. Mater Res Express 7(1):016544CrossRef
32.
go back to reference Goh CS, Wei J, Lee LC, Gupta M (2006) Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes. Mater Sci Eng A 423(1–2):153–156CrossRef Goh CS, Wei J, Lee LC, Gupta M (2006) Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes. Mater Sci Eng A 423(1–2):153–156CrossRef
33.
go back to reference Goh CS, Wei J, Lee LC, Gupta M (2008) Ductility improvement and fatigue studies in Mg-CNT nanocomposites. Compos Sci Technol 68(6):1432–1439CrossRef Goh CS, Wei J, Lee LC, Gupta M (2008) Ductility improvement and fatigue studies in Mg-CNT nanocomposites. Compos Sci Technol 68(6):1432–1439CrossRef
34.
go back to reference Guo W, Wang Q, Ye B, Li X, Liu X, Zhou H (2012) Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression. Mater Sci Eng A 556:267–270CrossRef Guo W, Wang Q, Ye B, Li X, Liu X, Zhou H (2012) Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression. Mater Sci Eng A 556:267–270CrossRef
35.
go back to reference Habibnejad-Korayem M, Mahmudi R, Poole WJ (2009) Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles. Mater Sci Eng A 519(1–2):198–203CrossRef Habibnejad-Korayem M, Mahmudi R, Poole WJ (2009) Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles. Mater Sci Eng A 519(1–2):198–203CrossRef
36.
go back to reference Hassan SF, Gupta M (2007a) Development of nano-Y2O3 containing magnesium nanocomposites using solidification processing. J Alloys Compd 429:176–183CrossRef Hassan SF, Gupta M (2007a) Development of nano-Y2O3 containing magnesium nanocomposites using solidification processing. J Alloys Compd 429:176–183CrossRef
37.
go back to reference Hassan SF, Gupta M (2007b) Effect of Nano-ZrO2 particulates reinforcement on microstructureand mechanical behavior of solidification processed elemental Mg. J Compos Mater 41:2533–2543CrossRef Hassan SF, Gupta M (2007b) Effect of Nano-ZrO2 particulates reinforcement on microstructureand mechanical behavior of solidification processed elemental Mg. J Compos Mater 41:2533–2543CrossRef
38.
go back to reference Hassan SF, Gupta M (2005) Enhancing physical and mechanical properties of Mg using nanosized Al2O3 particulates as reinforcement. Metall Mater Trans A 36:2253–2258CrossRef Hassan SF, Gupta M (2005) Enhancing physical and mechanical properties of Mg using nanosized Al2O3 particulates as reinforcement. Metall Mater Trans A 36:2253–2258CrossRef
39.
go back to reference Huang Y, Dieringa H, Kainer KU, Hort N (2014) Understanding effects of microstructural inhomogeneity on creep response—New approaches to improve the creep resistance in magnesium alloys. J Magnes Alloys 2:124–132CrossRef Huang Y, Dieringa H, Kainer KU, Hort N (2014) Understanding effects of microstructural inhomogeneity on creep response—New approaches to improve the creep resistance in magnesium alloys. J Magnes Alloys 2:124–132CrossRef
40.
go back to reference Ishiwata Y, Komarov S, Takeda Y (2012) Investigation of acoustic streaming in aluminum melts exposed to high-intensity ultrasonic irradiation. In: Proceedings of the 13th international conference on aluminum alloys (ICAA13), Pittsburgh, PA, USA, 3–7 June Ishiwata Y, Komarov S, Takeda Y (2012) Investigation of acoustic streaming in aluminum melts exposed to high-intensity ultrasonic irradiation. In: Proceedings of the 13th international conference on aluminum alloys (ICAA13), Pittsburgh, PA, USA, 3–7 June
41.
go back to reference Jia S, Jia SS, Sun G, Yao J (2005) The corrosion behaviour of Mg alloy AZ91D/TiCp metal matrix composite. In: Materials science forum, vol 488. Trans Tech Publications, pp 705–708 Jia S, Jia SS, Sun G, Yao J (2005) The corrosion behaviour of Mg alloy AZ91D/TiCp metal matrix composite. In: Materials science forum, vol 488. Trans Tech Publications, pp 705–708
42.
go back to reference Karuppusamy P, Lingadurai K, Sivananth V (2019) Influence of Cryogenic Treatment On As-cast AZ91+ 1.5 wt% WC Mg-MMNC wear performance. In: Advances in materials and metallurgy. Springer, Singapore, pp 185–197 Karuppusamy P, Lingadurai K, Sivananth V (2019) Influence of Cryogenic Treatment On As-cast AZ91+ 1.5 wt% WC Mg-MMNC wear performance. In: Advances in materials and metallurgy. Springer, Singapore, pp 185–197
43.
go back to reference Katsarou L, Mounib M, Lefebvre W, Vorozhtsov S, Pavese M, Badini C, Dieringa H (2016) Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirring. Mater Sci Eng A 659:84–92CrossRef Katsarou L, Mounib M, Lefebvre W, Vorozhtsov S, Pavese M, Badini C, Dieringa H (2016) Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirring. Mater Sci Eng A 659:84–92CrossRef
44.
go back to reference Khandelwal A, Mani K, Srivastava N, Gupta R, Chaudhari G (2017) Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting. Compos Part B Eng 123:64–73CrossRef Khandelwal A, Mani K, Srivastava N, Gupta R, Chaudhari G (2017) Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting. Compos Part B Eng 123:64–73CrossRef
45.
go back to reference Kubásek J, Vojtech D, Martínek M (2013) Structural characteristics and elevated temperature mechanical properties of AJ62 Mg alloy. Mater Charact 86:270–282CrossRef Kubásek J, Vojtech D, Martínek M (2013) Structural characteristics and elevated temperature mechanical properties of AJ62 Mg alloy. Mater Charact 86:270–282CrossRef
46.
go back to reference Kumar S, Suman KNS, Ravindra K, Poddar P, SB VS (2017) Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method. J Magnes Alloys 5(1):48–55 Kumar S, Suman KNS, Ravindra K, Poddar P, SB VS (2017) Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method. J Magnes Alloys 5(1):48–55
47.
go back to reference Labib F, Ghasemi HM, Mahmudi R (2016) Dry tribological behavior of Mg/SiCp composites at room and elevated temperatures. Wear 348:69–79CrossRef Labib F, Ghasemi HM, Mahmudi R (2016) Dry tribological behavior of Mg/SiCp composites at room and elevated temperatures. Wear 348:69–79CrossRef
48.
go back to reference Lan J, Yang Y, Li X (2004) Microstructure and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method. Mater Sci Eng A 386:284–290CrossRef Lan J, Yang Y, Li X (2004) Microstructure and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method. Mater Sci Eng A 386:284–290CrossRef
49.
go back to reference Li Q, Rottmair CA, Singer RF (2010) CNT reinforced light metal composites produced by melt stirring and by high pressure die casting. Compos Sci Technol 70(16):2242–2247CrossRef Li Q, Rottmair CA, Singer RF (2010) CNT reinforced light metal composites produced by melt stirring and by high pressure die casting. Compos Sci Technol 70(16):2242–2247CrossRef
50.
go back to reference Lim CYH, Leo DK, Ang JJS, Gupta M (2005) Wear of magnesium composites reinforced with nano-sized alumina particulates. Wear 259(1–6):620–625CrossRef Lim CYH, Leo DK, Ang JJS, Gupta M (2005) Wear of magnesium composites reinforced with nano-sized alumina particulates. Wear 259(1–6):620–625CrossRef
51.
go back to reference Liu S, Gao F, Zhang Q, Li W (2009) Mechanical properties and microstrutures of nano-sized sic particles reinforced AZ91D nanocomposites fabricated by high intensity ultrasonic assisted casting. Mater Sci Forum 618–619:449–452CrossRef Liu S, Gao F, Zhang Q, Li W (2009) Mechanical properties and microstrutures of nano-sized sic particles reinforced AZ91D nanocomposites fabricated by high intensity ultrasonic assisted casting. Mater Sci Forum 618–619:449–452CrossRef
52.
go back to reference Liu S-Y, Gao F-P, Zhang Q-Y, Xue Z, Li W-Z (2010) Fabrication of carbon nanotubes reinforced AZ91D composites by ultrasonic processing. Trans Nonferrous Met Soc China 20:1222–1227CrossRef Liu S-Y, Gao F-P, Zhang Q-Y, Xue Z, Li W-Z (2010) Fabrication of carbon nanotubes reinforced AZ91D composites by ultrasonic processing. Trans Nonferrous Met Soc China 20:1222–1227CrossRef
53.
go back to reference Malaki M, Xu W, Kasar AK, Menezes PL, Dieringa H, Varma RS, Gupta M (2019) Advanced metal matrix nanocomposites. Metals 9(3):330 Malaki M, Xu W, Kasar AK, Menezes PL, Dieringa H, Varma RS, Gupta M (2019) Advanced metal matrix nanocomposites. Metals 9(3):330
54.
go back to reference Meenashisundaram GK, Seetharaman S, Gupta M (2014) Enhancing overall tensile and compressive response of pure Mg using nano-TiB2 particulates. Mater Charact 94:178–188CrossRef Meenashisundaram GK, Seetharaman S, Gupta M (2014) Enhancing overall tensile and compressive response of pure Mg using nano-TiB2 particulates. Mater Charact 94:178–188CrossRef
55.
go back to reference Murugan S, Nguyen QB, Gupta M (2019) Synthesis of magnesium based nano-composites. In: Magnesium—The wonder element for engineering/biomedical applications. IntechOpen Murugan S, Nguyen QB, Gupta M (2019) Synthesis of magnesium based nano-composites. In: Magnesium—The wonder element for engineering/biomedical applications. IntechOpen
56.
go back to reference Nguyen QB, Gupta M (2008) Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates. J Alloy Compd 459(1–2):244–250CrossRef Nguyen QB, Gupta M (2008) Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates. J Alloy Compd 459(1–2):244–250CrossRef
57.
go back to reference Nguyen QB, Sim YHM, Gupta M, Lim CYH (2015) Tribology characteristics of magnesium alloy AZ31B and its composites. Tribol Int 82:464–471CrossRef Nguyen QB, Sim YHM, Gupta M, Lim CYH (2015) Tribology characteristics of magnesium alloy AZ31B and its composites. Tribol Int 82:464–471CrossRef
58.
go back to reference Nie KB, Deng KK, Wang XJ, Wang T, Wu K (2017) Influence of SiC nanoparticles addition on the microstructural evolution and mechanical properties of AZ91 alloy during isothermal multidirectional forging. Mater Charact 124:14–24CrossRef Nie KB, Deng KK, Wang XJ, Wang T, Wu K (2017) Influence of SiC nanoparticles addition on the microstructural evolution and mechanical properties of AZ91 alloy during isothermal multidirectional forging. Mater Charact 124:14–24CrossRef
59.
go back to reference Nie KB, Deng KK, Wang XJ, Wu K (2017) Characterization and strengthening mechanism of SiC nanoparticles reinforced magnesium matrix composite fabricated by ultrasonic vibration assisted squeeze casting. J Mater Res 32:2609–2620CrossRef Nie KB, Deng KK, Wang XJ, Wu K (2017) Characterization and strengthening mechanism of SiC nanoparticles reinforced magnesium matrix composite fabricated by ultrasonic vibration assisted squeeze casting. J Mater Res 32:2609–2620CrossRef
60.
go back to reference Nie KB, Wang XJ, Wu K, Xu L, Zheng MY, Hu XS (2011) Processing, microstructure and mechanical properties of magnesium matrix nanocomposites fabricated by semisolid stirring assisted ultrasonic vibration. J Alloys Compd 509:8664–8669CrossRef Nie KB, Wang XJ, Wu K, Xu L, Zheng MY, Hu XS (2011) Processing, microstructure and mechanical properties of magnesium matrix nanocomposites fabricated by semisolid stirring assisted ultrasonic vibration. J Alloys Compd 509:8664–8669CrossRef
61.
go back to reference Nie KB, Wang XJ, Xu L, Wu K, Hu XS, Zheng MY (2012) Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite. Mater Des 36:199–205CrossRef Nie KB, Wang XJ, Xu L, Wu K, Hu XS, Zheng MY (2012) Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite. Mater Des 36:199–205CrossRef
62.
go back to reference Pardo A, Merino S, Merino MC, Barroso I, Mohedano M, Arrabal R, Viejo F (2009) Corrosion behaviour of silicon–carbide-particle reinforced AZ92 magnesium alloy. Corros Sci 51(4):841–849CrossRef Pardo A, Merino S, Merino MC, Barroso I, Mohedano M, Arrabal R, Viejo F (2009) Corrosion behaviour of silicon–carbide-particle reinforced AZ92 magnesium alloy. Corros Sci 51(4):841–849CrossRef
63.
go back to reference Praveenkumar R, Periyasamy P, Mohanavel V, Ravikumar MM (2019) Mechanical and tribological behavior of Mg-matrix composites manufactured by stir casting. Int J Veh Struct Syst (IJVSS) 11(1) Praveenkumar R, Periyasamy P, Mohanavel V, Ravikumar MM (2019) Mechanical and tribological behavior of Mg-matrix composites manufactured by stir casting. Int J Veh Struct Syst (IJVSS) 11(1)
64.
go back to reference Ramirez A, Ma Q, Davis B, Wilks T, St John DH (2008) Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys. Scripta Mater 59:19–22CrossRef Ramirez A, Ma Q, Davis B, Wilks T, St John DH (2008) Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys. Scripta Mater 59:19–22CrossRef
65.
go back to reference Sankaranarayanan S, Habibi MK, Jayalakshmi S, Jia Ai K, Almajid A, Gupta M (2015) Nano-AlN particle reinforced Mg composites: microstructural and mechanical properties. Mater Sci Technol 31(9):1122–1131CrossRef Sankaranarayanan S, Habibi MK, Jayalakshmi S, Jia Ai K, Almajid A, Gupta M (2015) Nano-AlN particle reinforced Mg composites: microstructural and mechanical properties. Mater Sci Technol 31(9):1122–1131CrossRef
66.
go back to reference Shen MJ, Ying WF, Wang XJ, Zhang MF, Wu K (2015) Development of high performance magnesium matrix nanocomposites using nano-SiC particulates as reinforcement. J Mater Eng Perform 24:3798–3807CrossRef Shen MJ, Ying WF, Wang XJ, Zhang MF, Wu K (2015) Development of high performance magnesium matrix nanocomposites using nano-SiC particulates as reinforcement. J Mater Eng Perform 24:3798–3807CrossRef
67.
go back to reference Shiying L, Feipeng G, Qiongyuan Z, Wenzhen L (2009) Mechanical properties and microstructures of nano-sized SiC particle reinforced AZ91D nanocomposites fabricated by high intensity ultrasonic assisted casting. Mater Sci Forum 618–619:449–452 Shiying L, Feipeng G, Qiongyuan Z, Wenzhen L (2009) Mechanical properties and microstructures of nano-sized SiC particle reinforced AZ91D nanocomposites fabricated by high intensity ultrasonic assisted casting. Mater Sci Forum 618–619:449–452
68.
go back to reference Suslick KS, Cline RE, Hammerton DA (1986) The sonochemical hot spot. J Am Chem Soc 108:5641–5642CrossRef Suslick KS, Cline RE, Hammerton DA (1986) The sonochemical hot spot. J Am Chem Soc 108:5641–5642CrossRef
69.
go back to reference Suslick KS, Matula TJ (1999) Ultrasonic physical mechanisms and chemical effects. In: Webster J (ed) Wiley encyclopedia of electrical and electronics engineering. Wiley, Hoboken, NJ, USA Suslick KS, Matula TJ (1999) Ultrasonic physical mechanisms and chemical effects. In: Webster J (ed) Wiley encyclopedia of electrical and electronics engineering. Wiley, Hoboken, NJ, USA
70.
go back to reference Tiwari S, Balasubramaniam R, Gupta M (2007) Corrosion behavior of SiC reinforced magnesium composites. Corros Sci 49(2):711–725CrossRef Tiwari S, Balasubramaniam R, Gupta M (2007) Corrosion behavior of SiC reinforced magnesium composites. Corros Sci 49(2):711–725CrossRef
71.
go back to reference Vogt R, Zhang Z, Li Y, Bonds M, Browning N, Lavernia E, Schoenung J (2009) The absence of thermal expansion mismatch strengthening in nanostructured metal–matrix composites. Scr Mater 61:1052–1055CrossRef Vogt R, Zhang Z, Li Y, Bonds M, Browning N, Lavernia E, Schoenung J (2009) The absence of thermal expansion mismatch strengthening in nanostructured metal–matrix composites. Scr Mater 61:1052–1055CrossRef
72.
go back to reference Wang X, Liu W, Xiaoshi Hu, Kun Wu (2018) Microstructural modification and strength enhancement by SiC nanoparticles in AZ31 magnesium alloy during hot rolling. Mater Sci Eng A 715:49–61CrossRef Wang X, Liu W, Xiaoshi Hu, Kun Wu (2018) Microstructural modification and strength enhancement by SiC nanoparticles in AZ31 magnesium alloy during hot rolling. Mater Sci Eng A 715:49–61CrossRef
73.
go back to reference Zarembo LK (1971) Part III: Acoustic streaming. In: Rozenberg LD (ed) High-intensity ultrasonic fields. Springer, New York, NY, USA Zarembo LK (1971) Part III: Acoustic streaming. In: Rozenberg LD (ed) High-intensity ultrasonic fields. Springer, New York, NY, USA
74.
go back to reference Zhang C, Zhang T, Wang Y, Wei F, Shao Y, Meng G, Wu K (2015) Effect of SiC particulates on the corrosion behavior of extruded AZ91/SiCp composites during the early stage of exposure. J Electrochem Soc 162(14):C754–C766CrossRef Zhang C, Zhang T, Wang Y, Wei F, Shao Y, Meng G, Wu K (2015) Effect of SiC particulates on the corrosion behavior of extruded AZ91/SiCp composites during the early stage of exposure. J Electrochem Soc 162(14):C754–C766CrossRef
75.
go back to reference Zhang L, Luo X, Liu J, Leng Y, An L (2018) Dry sliding wear behavior of Mg-SiC nanocomposites with high volume fractions of reinforcement. Mater Lett 228:112–115CrossRef Zhang L, Luo X, Liu J, Leng Y, An L (2018) Dry sliding wear behavior of Mg-SiC nanocomposites with high volume fractions of reinforcement. Mater Lett 228:112–115CrossRef
76.
go back to reference Zhou X, Su D, Wu C, Liu L (2012) Tensile mechanical properties and strengthening mechanism of hybrid carbon nanotube and silicon carbide nanoparticle-reinforced magnesium alloy composites. J Nanomater 1–7 Zhou X, Su D, Wu C, Liu L (2012) Tensile mechanical properties and strengthening mechanism of hybrid carbon nanotube and silicon carbide nanoparticle-reinforced magnesium alloy composites. J Nanomater 1–7
77.
go back to reference Zhu YT, Lowe TC (2000) Observationsand issues on mechanisms of grain refinement during ECAP process. Mater Sci Eng A 291:46–53CrossRef Zhu YT, Lowe TC (2000) Observationsand issues on mechanisms of grain refinement during ECAP process. Mater Sci Eng A 291:46–53CrossRef
78.
go back to reference Zhu SM, Easton MA, Gibson MA, Dargusch MS, Nie JF (2013) Analysis of the creep behaviour of die-cast Mg–3Al–1Si alloy. Mater Sci Eng A 578:377–382CrossRef Zhu SM, Easton MA, Gibson MA, Dargusch MS, Nie JF (2013) Analysis of the creep behaviour of die-cast Mg–3Al–1Si alloy. Mater Sci Eng A 578:377–382CrossRef
79.
go back to reference Zhu SM, Gibson MA, Easton MA, Nie JF (2010) The relationship between microstructure and creep resistance in die-cast magnesium-rare earth alloys. Scr Mater 63:698–703CrossRef Zhu SM, Gibson MA, Easton MA, Nie JF (2010) The relationship between microstructure and creep resistance in die-cast magnesium-rare earth alloys. Scr Mater 63:698–703CrossRef
Metadata
Title
Understanding Fabrication and Properties of Magnesium Matrix Nanocomposites
Authors
Sudip Banerjee
Suswagata Poria
Goutam Sutradhar
Prasanta Sahoo
Copyright Year
2021
Publisher
Springer Singapore
DOI
https://doi.org/10.1007/978-981-33-4550-8_9

Premium Partners