Using Taguchi method to determine optimum process conditions for flue gas desulfurization through an amine scrubber

This study was done to determine the optimum process conditions for absorption of sulfur dioxide in a mixture of flue gases. Using a selective amine-based absorber; a high amount of SO₂ was absorbed in the scrubbing process. The process was designed to reduce the amount of sulfur dioxide. The pilot plant was designed and set up in the Research Center of Petroleum University of Technology, containing absorption and desorption stages. This paper reports an investigation of the effect and optimization of parameters that improve the efficiency of the whole process. The experiments were conducted under varying levels of desorption temperature, pH of the absorber solution, concentration of SO₂ inlet gas, and flow rate of the absorbing solution. Using Taguchi experimental design method, the optimum conditions were identified for the absorption process. An efficiency of more than 99 % could be obtained by varying the parameters in which all the released SO₂ gas was absorbed from the inlet flue gas; an achievement that is much favorable for industrial purposes.