Skip to main content
main-content
Top

Hint

Swipe to navigate through the chapters of this book

2020 | OriginalPaper | Chapter

Virtual Tire Design/Assessment in the Early Vehicle Development Process

Authors: Francesco Calabrese, Manfred Bäcker, Axel Gallrein, Shenhai Ran

Published in: Advances in Dynamics of Vehicles on Roads and Tracks

Publisher: Springer International Publishing

share
SHARE

Abstract

The choice of the optimal tire setup for a given vehicle is not a trivial task. Nowadays car manufacturers often collaborate with the tire manufacturers during the development phase of new vehicles in order to improve the quality of their final products. At the beginning of a new development project, vehicle engineers define the so called vehicle key performance indicators (KPIs) and respective targets that the vehicle has to achieve. Regarding tires, the most crucial point is to answer the following key questions:
Literature
1.
go back to reference Calabrese, F., Dusini, L., Bäcker, M., Gallrein, A.: Managing the variety of potential tire/wheel sizes in the early vehicle development process. In: 9th International Munich Chassis Symposium 2018. Springer, Fachmedien Wiesbaden (2018). 978-3-658-22050-1 Calabrese, F., Dusini, L., Bäcker, M., Gallrein, A.: Managing the variety of potential tire/wheel sizes in the early vehicle development process. In: 9th International Munich Chassis Symposium 2018. Springer, Fachmedien Wiesbaden (2018). 978-3-658-22050-1
2.
go back to reference Bäcker, M., Gallrein, A., Calabrese, F., Leister, G.: Simulation of a tire blow-out in a full vehicle scenario. In: Pfeffer, P. (eds.) Proceedings of 7th International Munich Chassis Symposium 2016. Springer Vieweg, Wiesbaden (2016) Bäcker, M., Gallrein, A., Calabrese, F., Leister, G.: Simulation of a tire blow-out in a full vehicle scenario. In: Pfeffer, P. (eds.) Proceedings of 7th International Munich Chassis Symposium 2016. Springer Vieweg, Wiesbaden (2016)
3.
go back to reference Koutny, F.: A method for computing the radial deformation characteristics of belted tires. Tire Sci. Technol. TSTCA 4(3), 190–212 (1976) CrossRef Koutny, F.: A method for computing the radial deformation characteristics of belted tires. Tire Sci. Technol. TSTCA 4(3), 190–212 (1976) CrossRef
5.
go back to reference Baecker, M., Gallrein, A., Haga, H.: A tire model for very large tire deformations and its application in very severe events. SAE Int. J. Mater. Manuf. 3(1), 142–151 (2010) CrossRef Baecker, M., Gallrein, A., Haga, H.: A tire model for very large tire deformations and its application in very severe events. SAE Int. J. Mater. Manuf. 3(1), 142–151 (2010) CrossRef
6.
go back to reference Leister, G., Fahrzeugreifen und Fahrwerkentwicklung: Strategie, Methoden, Tools (ATZ/MTZ-Fachbuch) Gebundene Ausgabe – 11. Dezember 2008, ISBN-10: 3834806714 Leister, G., Fahrzeugreifen und Fahrwerkentwicklung: Strategie, Methoden, Tools (ATZ/MTZ-Fachbuch) Gebundene Ausgabe – 11. Dezember 2008, ISBN-10: 3834806714
7.
go back to reference Gallrein, A., DeCuyper, J., Dehandschutter, W., Baecker, M.: Parameter identification for LMS CDTire. In: 3rd International Tyre Colloquium, Tyre Models for Vehicle Dynamics Analysis Proceedings, Vehicle System Dynamics, vol. 43, Supplement 2005, pp. 444–456 (2008) Gallrein, A., DeCuyper, J., Dehandschutter, W., Baecker, M.: Parameter identification for LMS CDTire. In: 3rd International Tyre Colloquium, Tyre Models for Vehicle Dynamics Analysis Proceedings, Vehicle System Dynamics, vol. 43, Supplement 2005, pp. 444–456 (2008)
Metadata
Title
Virtual Tire Design/Assessment in the Early Vehicle Development Process
Authors
Francesco Calabrese
Manfred Bäcker
Axel Gallrein
Shenhai Ran
Copyright Year
2020
DOI
https://doi.org/10.1007/978-3-030-38077-9_156

Premium Partner