Top

International Journal of Material Forming

Published in:

23-10-2020 | Original Research

Warm forming simulations of Al-Mg alloy sheet using a viscoplastic model and advanced yield functions

Authors: Qing Zhang, Yong Zhang, Yuantao Sun, Dateng Zheng

Published in: International Journal of Material Forming | Issue 3/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Al-Mg alloys have the properties of anisotropy, temperature softening and strain rate hardening in warm forming conditions. The former could be modeled by an advanced non-quadratic yield function. The rate-dependent characteristic could be modeled by viscoplastic constitutive models. Up to now, few investigations have combined a viscoplastic model with advanced yield functions for warm forming simulation, especially by an implicit finite element (FE) program. In this investigation, the warm forming simulation of AA5182-O alloy was presented via Abaqus/Standard, considering the viscoplasticity and anisotropy. The established viscoplastic model could well reflect the nearly rate-independent initial yield stress of the selected material, and its parameters could be easily calibrated. The numerical implementation of the viscoplastic model associated with Yld2000 and Yld2004 yield functions was carried out using an implicit integration algorithm, and the algorithmic tangent was deduced. Results accordance between the simulation and experiment, including warm uniaxial tension test and warm deep drawing test of AA5182-O, showed the rationality of the established material model and the corresponding implicit implementation scheme.

previous article Effect of tension-compression testing strategy on kinematic model calibration and springback simulation of advanced high strength steels

next article A comparison study of the yield surface exponent of the Barlat yield function on the forming limit curve prediction of zirconium alloys with M-K method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Hirsch J (2014) Recent development in aluminium for automotive applications. T Nonferr Metal Soc 24(7):1995–2002. https://doi.org/10.1016/s1003-6326(14)63305-7CrossRef

Mahabunphachai S, Koç M (2010) Investigations on forming of aluminum 5052 and 6061 sheet alloys at warm temperatures. Mater Des (1980-2015) 31(5):2422–2434. https://doi.org/10.1016/j.matdes.2009.11.053CrossRef

Panicker SS, Singh HG, Panda SK, Dashwood R (2015) Characterization of tensile properties, limiting strains, and deep drawing behavior of AA5754-H22 sheet at elevated temperature. J Mater Eng Perform 24(11):4267–4282. https://doi.org/10.1007/s11665-015-1740-6CrossRef

Simões V, Laurent H, Oliveira M, Menezes L (2018). The influence of warm forming in natural aging and springback of Al-Mg-Si alloys. Int J Mater Form doi:https://doi.org/10.1007/s12289-018-1406-7, 12, 1

Kabirian F, Khan AS, Pandey A (2014) Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: experiment and constitutive modeling. Int J Plast 55:232–246. https://doi.org/10.1016/j.ijplas.2013.11.001CrossRef

Laurent H, Coër J, Manach PY, Oliveira MC, Menezes LF (2015) Experimental and numerical studies on the warm deep drawing of an Al–mg alloy. Int J Mech Sci 93:59–72. https://doi.org/10.1016/j.ijmecsci.2015.01.009CrossRef

Barlat F, Kim D-J (2016) Advanced constitutive modeling and application to industrial forming processes. MATEC Web of Conferences 80:15013. https://doi.org/10.1051/matecconf/20168015013CrossRef

Barlat F, Brem JC, Yoon JW, Chung K, Dick RE, Lege DJ, Pourboghrat F, Choi SH, Chu E (2003) Plane stress yield function for aluminum alloy sheets—part 1: theory. Int J Plast 19(9):1297–1319. https://doi.org/10.1016/s0749-6419(02)00019-0CrossRefMATH

Barlat F, Aretz H, Yoon JW, Karabin ME, Brem JC, Dick RE (2005) Linear transfomation-based anisotropic yield functions. Int J Plast 21(5):1009–1039. https://doi.org/10.1016/j.ijplas.2004.06.004CrossRefMATH

10.

Cai Z, Wan M, Liu Z, Wu X, Ma B, Cheng C (2017) Thermal-mechanical behaviors of dual-phase steel sheet under warm-forming conditions. Int J Mech Sci 126:79–94. https://doi.org/10.1016/j.ijmecsci.2017.03.009CrossRef

11.

Tian H, Brownell B, Baral M, Korkolis YP (2016) Earing in cup-drawing of anisotropic Al-6022-T4 sheets. Int J Mater Form 10(3):329–343. https://doi.org/10.1007/s12289-016-1282-yCrossRef

12.

Charoensuk K, Panich S, Uthaisangsuk V (2017) Damage initiation and fracture loci for advanced high strength steel sheets taking into account anisotropic behaviour. J Mater Process Technol 248:218–235. https://doi.org/10.1016/j.jmatprotec.2017.05.035CrossRef

13.

Kuwabara T, Mori T, Asano M, Hakoyama T, Barlat F (2017) Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation. Int J Plast 93:164–186. https://doi.org/10.1016/j.ijplas.2016.10.002CrossRef

14.

Yoon J, Barlat F, Dick R, Karabin M (2006) Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Int J Plast 22(1):174–193. https://doi.org/10.1016/j.ijplas.2005.03.013CrossRefMATH

15.

Lee J-Y, Lee K-J, Lee M-G, Kuwabara T, Barlat F (2019) Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet. Int J Solids Struct 156-157:107–118. https://doi.org/10.1016/j.ijsolstr.2018.08.005CrossRef

16.

Abedrabbo N, Pourboghrat F, Carsley J (2006) Forming of aluminum alloys at elevated temperatures – part 1: material characterization. Int J Plast 22(2):314–341. https://doi.org/10.1016/j.ijplas.2005.03.005CrossRefMATH

17.

Abedrabbo N, Pourboghrat F, Carsley J (2007) Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models. Int J Plast 23(5):841–875. https://doi.org/10.1016/j.ijplas.2006.10.005CrossRefMATH

18.

Suttner S, Merklein M (2016) Experimental and numerical investigation of a strain rate controlled hydraulic bulge test of sheet metal. J Mater Process Technol 235:121–133. https://doi.org/10.1016/j.jmatprotec.2016.04.022CrossRef

19.

Cowper GR, Symonds PS (1957). Strain hardening and strain rate effect in the impact loading of cantilever beams

20.

Liu Y, Zhu Z, Wang Z, Zhu B, Wang Y, Zhang Y (2018) Flow and friction behaviors of 6061 aluminum alloy at elevated temperatures and hot stamping of a B-pillar. Int J Adv Manuf Technol 96(9–12):4063–4083. https://doi.org/10.1007/s00170-018-1790-7CrossRef

21.

Panicker SS, Kumar Panda S (2016) Improvement in material flow during nonisothermal warm deep drawing of nonheat treatable aluminum alloy sheets. J Manuf Sci E 139(3):031013. https://doi.org/10.1115/1.4034594CrossRef

22.

Zhang N (2016). Material characterization and finite element simulations of aluminum alloy sheets during non-isothermal forming process. Dissertations

23.

Lee MG, Kim C, Pavlina EJ, Barlat F (2011) Advances in sheet forming—materials modeling, numerical simulation, and press technologies. J Manuf Sci E 133(6):061001. https://doi.org/10.1115/1.4005117CrossRef

24.

Liu W, Chen BK, Pang Y (2018). A new temperature-dependent anisotropic constitutive model for predicting deformation and spring-back in warm deep drawing of automotive AA5086-H111 aluminium alloy sheet. Int J Adv Manuf Technol doi:https://doi.org/10.1007/s00170-018-2161-0, 97, 9-12

25.

Neto DM, Martins JMP, Cunha PM, Alves JL, Oliveira MC, Laurent H, Menezes LF (2017). Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions. Int J Solids Struct doi:https://doi.org/10.1016/j.ijsolstr.2017.06.011, 151

26.

Kurukuri S, Miroux A, Ghosh M, van den Boogaard AH (2009) Effect of temperature on anisotropy in forming simulation of aluminum alloys. Int J Mater Form 2(S1):387–390. https://doi.org/10.1007/s12289-009-0462-4CrossRef

27.

Vegter H, van den Boogaard AH (2006) A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states. Int J Plast 22(3):557–580. https://doi.org/10.1016/j.ijplas.2005.04.009CrossRefMATH

28.

Marthinsen K, Nes E (2001) Modelling strain hardening and steady state deformation of Al–mg alloys. Mater Sci Technol 17(4):376–388. https://doi.org/10.1179/026708301101510096CrossRef

29.

Ghavam K, Bagheriasl R, Worswick MJ (2013) Analysis of nonisothermal deep drawing of aluminum alloy sheet with induced anisotropy and rate sensitivity at elevated temperatures. J Manuf Sci E 136(1):011006. https://doi.org/10.1115/1.4025407CrossRef

30.

Bagheriasl R, Ghavam K, Worswick MJ (2014) Formability improvement with independent die and punch temperature control. Int J Mater Form 7(2):139–154. https://doi.org/10.1007/s12289-012-1115-6CrossRef

31.

van den Boogaard T, Havinga J, Belin A, Barlat F (2016) Parameter reduction for the Yld2004-18p yield criterion. Int J Mater Form 9(2):175–178. https://doi.org/10.1007/s12289-015-1221-3CrossRef

32.

Dunne F, Petrinic N (2005). Introduction to computational plasticity. Oxford University Press,

33.

Safaei M, Yoon JW, De Waele W (2014) Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation. Int J Plast 58:219–238. https://doi.org/10.1016/j.ijplas.2013.09.010CrossRef

34.

Scherzinger WM (2017) A return mapping algorithm for isotropic and anisotropic plasticity models using a line search method. Comput Method Appl M 317:526–553. https://doi.org/10.1016/j.cma.2016.11.026MathSciNetCrossRefMATH

35.

Neto ES, Peric D, Owen D (2008) Computational methods for plasticity: theory and applications. Wiley, ChichesterCrossRef

36.

Coër J, Bernard C, Laurent H, Andrade-Campos A, Thuillier S (2010) The effect of temperature on anisotropy properties of an aluminium alloy. Exp Mech 51(7):1185–1195. https://doi.org/10.1007/s11340-010-9415-6CrossRef

37.

Kim HS, Koc M (2008) Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions. J Mater Process Technol 204(1):370–383. https://doi.org/10.1016/j.jmatprotec.2007.11.059CrossRef

38.

Billur E (2013). Fundamentals and applications of hot stamping technology for producing crash-relevant automotive parts. The Ohio State University,

Title: Warm forming simulations of Al-Mg alloy sheet using a viscoplastic model and advanced yield functions
Authors: Qing Zhang
Yong Zhang
Yuantao Sun
Dateng Zheng
Publication date: 23-10-2020
Publisher: Springer Paris
Published in: International Journal of Material Forming / Issue 3/2021
Print ISSN: 1960-6206
Electronic ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-020-01587-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2021

Formability prediction of Ti6Al4V titanium alloy sheet deformed at room temperature and 600 °C

On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation

Effect of tension-compression testing strategy on kinematic model calibration and springback simulation of advanced high strength steels

Effect of single and multiple parts manufacturing on temperature-induced residual stress problems in SLM

Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration

A comparison study of the yield surface exponent of the Barlat yield function on the forming limit curve prediction of zirconium alloys with M-K method

Premium Partners