Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Embodied Energy and Cost of Load Bearing Masonry with Alternative Binders and Units—Case Study Read chapter Read first chapter

2021 | OriginalPaper | Chapter

Waste Recycled PET as a Binder in Polymer Mortar

Authors : Bhagyashri Sarde, Y. D. Patil, Dhruv Jani

Published in: 3rd International Conference on Innovative Technologies for Clean and Sustainable Development

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Recycled waste plastic (PET) use as binder, filler and aggregate in polymer concrete or mortar is one of the best solution for plastic waste disposal problem. In this work, waste plastic (PET) were converted into unsaturated polyester resin through glycolysis process. This resin was used as a binding material in polymer mortar. Three different resin content (10, 15, 18%) was used. The best physical and mechanical properties were showed by MIX C polymer mortar with 18 wt% resin, 32 wt% filler and 50 wt% sand. Results of this study reveal that feasibility of using recycled PET waste as resin or binding material in polymer mortar. Use of waste plastic as binder increases mechanical properties of concrete as well as reduces hazard to environment by utilizing plastic and reducing cement consumption. Polymer mortar prepared from recycled PET flakes can be used for many constructional applications such as for sewer pipes, repairing work etc.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now
previous chapter Physical and Microstructural Properties of Construction and Demolition Waste Based Masonry Units
next chapter A Study on Performance of Carbon Based Nano-enabled Cement Composites and Concrete
Literature
1.
Yin, S., et al.: A life cycle assessment of recycled polypropylene fiber in concrete footpaths. J. Clean. Prod. 112, 2231–2242 (2016)
2.
Gu, F., et al.: From waste plastics to industrial raw materials: a life cycle assessment of mechanical plastic recycling practice based on real world case study. Sci. Total Environ. 601, 1192–1207 (2017)
3.
Tawfik, M.E., Eskander, S.B.: Polymer concrete from marble waste and recycled polyethylene terepthalete. J. Elastomers Plast. 38, 65–78 (2006)
4.
Mahdi, F., et al.: Physiochemical properties of polymer mortar composites using resins derived from post-consumer PET bottles. Cement Concr. Compos. 29, 241–248 (2007)
5.
Kalantar, Z.N., et al.: A review of using waste and virgin polymer in pavement. Constr. Build. Mater. 33, 55–62 (2012)
6.
Reis, J.M.L.: Fracture assessment of polymer concrete in chemical degradation solutions. Constr. Build. Mater. 24, 1708–171 (2010)
7.
Rebeiz, K.S.: Precast use of polymer concrete using unsaturated polyester resin based on recycled PET waste. Constr. Build. Mater. 10, 215–220 (1996)
8.
Wan Jo, B., et al.: Uniaxial creep behavior and prediction of recycled PET polymer concrete. Constr. Build. Mater. 21, 1552–1559 (2007)
9.
Ahn, S., et al.: Identification of stiffness distribution of fatigue loaded polymer concrete through vibration measurements. Compos. Struct. 136, 11–15 (2016)
10.
Son, S.W., et al.: Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive. Constr. Build. Mater. 669–679 (2012)
11.
Jmal, H., et al.: Influence of the grade on the variability of the mechanical properties of polypropylene waste. Waste Manag. 75, 160–173 (2018)
12.
Tonet, KG: Polymer concrete with recycled PET: the influence of the addition of industrial waste on flammability. Constr. Build. Mater. 40, 378–389 (2013)
13.
Aciu, C., et al.: Recycling of polystyrene waste in the composition of ecological mortars. In: 8th International Conference Interdisciplinary in Engineering, INTER-ENG 2014, 9–10 Oct 2014, Trigu-Mures, Romania, vol. 19, pp. 498–505 (2014). Procedia Technology, Elsevier publication
14.
Kin, J., et al.: Synthesis and applications of unsaturated polyester resin based on PET waste. Korean J. Chem. Eng. 24(6), 1076–1083 (2007)
15.
Konin, A.: Use of plastic waste as a binding material in the manufacture of tiles: case of eastes with a basis of polypropylene. Mater. Struct. 44, 1381–1387 (2011)
16.
Kanzhin, R.M., et al.: Conversion of polymer and resin waste into valuable product. Juniper Online J. Mater. Sci. 5(2), 1–7 (2019)
17.
Sekar, V.R., et al.: A technique to dispose waste plastics in ecofriendly way—application in construction of flexible pavements. Constr. Build. Mater. 28(1), 311–320 (2012)
18.
ASTM C905-01:2012 Standard test methods for apparent density of chemical resistant mortar, grout, monolithic surfacing and polymer mortar
19.
ASTM C579-18 Standard test method for compressive strength of chemical resistant mortar, grout, monolithic surfacing and polymer concrete
20.
ASTM C307-18: Standard test method for tensile strength of chemical-resistant mortars, grouts and monolithic surfacing
21.
ASTM C580-18: Standard test method for flexure strength and modulus of elasticity of chemical-resistant mortars, grouts, monolithic surfacing and polymer concrete
22.
ACI 548.1R-97: Guide for the use of polymers in concrete
Metadata
Title
Waste Recycled PET as a Binder in Polymer Mortar
Authors
Bhagyashri Sarde
Y. D. Patil
Dhruv Jani
Copyright Year
2021
Book
3rd International Conference on Innovative Technologies for Clean and Sustainable Development

Print ISBN: 978-3-030-51484-6

Electronic ISBN: 978-3-030-51485-3

Copyright Year: 2021

DOI
https://doi.org/10.1007/978-3-030-51485-3_28