Skip to main content
Top
Published in: Rock Mechanics and Rock Engineering 4/2014

01-07-2014 | Original Paper

Water Saturation Effects on the Brazilian Tensile Strength of Gypsum and Assessment of Cracking Processes Using High-Speed Video

Authors: Louis Ngai Yuen Wong, Ming Chuan Jong

Published in: Rock Mechanics and Rock Engineering | Issue 4/2014

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This study investigates the water weakening effect on the tensile strength, as well as the fracturing behavior, of an artificially molded Hydrocal B-11 gypsum rock. Brazilian disc tests, with the aid of a high-speed video system to monitor and record the cracking processes, are conducted on dry and wet specimens to determine their tensile strengths. The dry specimens are oven-dried, while the wet specimens are prepared by soaking in water for 1, 3, and 10 weeks to achieve different levels of water content. The test results show that the tensile strength drops to nearly half of its dry value after being soaked in water for only 1 week. The tensile strength reduces only slightly further after the specimens have been immersed in water for 3 and 10 weeks. An analysis of the recorded high-speed footage shows that the primary crack initiates at the center as observed from the surface for the majority of the tested specimens. Most importantly, the cracking processes of dry and wet specimens are distinctly different with regard to the speed of crack propagation and the number of cracks developed.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference Akazawa T (1943) New test method for evaluating internal stress due to compression of concrete (the splitting tension test). J Jpn Soc Civil Eng 29:777–787 Akazawa T (1943) New test method for evaluating internal stress due to compression of concrete (the splitting tension test). J Jpn Soc Civil Eng 29:777–787
go back to reference ASTM International (2008) D3967-08: standard test method for splitting tensile strength of intact rock core specimens. ASTM International, West Conshohocken ASTM International (2008) D3967-08: standard test method for splitting tensile strength of intact rock core specimens. ASTM International, West Conshohocken
go back to reference Barla G, Innaurato N (1973) Indirect tensile testing of anisotropic rocks. Rock Mech 5(4):215–230CrossRef Barla G, Innaurato N (1973) Indirect tensile testing of anisotropic rocks. Rock Mech 5(4):215–230CrossRef
go back to reference Bazant ZP, Kazemi MT, Hasegawa T, Mazars J (1991) Size effect in Brazilian split-cylinder tests: measurements and fracture analysis. ACI Mater J 88(3):325–332 Bazant ZP, Kazemi MT, Hasegawa T, Mazars J (1991) Size effect in Brazilian split-cylinder tests: measurements and fracture analysis. ACI Mater J 88(3):325–332
go back to reference Cai M, Kaiser PK (2004) Numerical simulation of the Brazilian test and the tensile strength of anisotropic rocks and rocks with preexisting cracks. Int J Rock Mech Min Sci 41(Suppl 1):478–483. doi:10.1016/j.ijrmms.2004.03.086 Cai M, Kaiser PK (2004) Numerical simulation of the Brazilian test and the tensile strength of anisotropic rocks and rocks with preexisting cracks. Int J Rock Mech Min Sci 41(Suppl 1):478–483. doi:10.​1016/​j.​ijrmms.​2004.​03.​086
go back to reference Carneiro FLLB (1943) A new method to determine the tensile strength of concrete. In: Paper presented at the 5th meeting of the Brazilian Association for Technical Rules, 3d. Section. (Associação Brasileira de Normas Técnicas) Carneiro FLLB (1943) A new method to determine the tensile strength of concrete. In: Paper presented at the 5th meeting of the Brazilian Association for Technical Rules, 3d. Section. (Associação Brasileira de Normas Técnicas)
go back to reference Chen S, Yue ZQ, Tham LG, Lee PKK (2004b) Modeling of the indirect tensile test for inhomogeneous granite using a digital image-based numerical method. Int J Rock Mech Min Sci 41(Suppl 1):2B 01 1–6 Chen S, Yue ZQ, Tham LG, Lee PKK (2004b) Modeling of the indirect tensile test for inhomogeneous granite using a digital image-based numerical method. Int J Rock Mech Min Sci 41(Suppl 1):2B 01 1–6
go back to reference Chou Y-C, Chen C-S (2008) Determining elastic constants of transversely isotropic rocks using Brazilian test and iterative procedure. Int J Numer Anal Meth Geomech 32(3):219–234. doi:10.1002/nag.619 CrossRef Chou Y-C, Chen C-S (2008) Determining elastic constants of transversely isotropic rocks using Brazilian test and iterative procedure. Int J Numer Anal Meth Geomech 32(3):219–234. doi:10.​1002/​nag.​619 CrossRef
go back to reference Colback PSB (1966) An analysis of brittle fracture initiation and propagation in the Brazilian test. In: Paper presented at the 1st congress of the International Society of Rock Mechanics, Lisbon, Portugal Colback PSB (1966) An analysis of brittle fracture initiation and propagation in the Brazilian test. In: Paper presented at the 1st congress of the International Society of Rock Mechanics, Lisbon, Portugal
go back to reference Dube AK, Singh B (1972) Effect of humidity on tensile strength of sandstone. J Mines Metals Fuels 20(1):8–10 Dube AK, Singh B (1972) Effect of humidity on tensile strength of sandstone. J Mines Metals Fuels 20(1):8–10
go back to reference Fairbairn EMR, Ulm F-J (2002) A tribute to Fernando L. L. B. Carneiro (1913–2001) engineer and scientist who invented the Brazilian test. Mater Struct 35(3):195–196. doi:10.1007/bf02533589 CrossRef Fairbairn EMR, Ulm F-J (2002) A tribute to Fernando L. L. B. Carneiro (1913–2001) engineer and scientist who invented the Brazilian test. Mater Struct 35(3):195–196. doi:10.​1007/​bf02533589 CrossRef
go back to reference Hobbs DW (1965) An assessment of a technique for determining the tensile strength of rock. Br J Appl Phys 16(2):259–268CrossRef Hobbs DW (1965) An assessment of a technique for determining the tensile strength of rock. Br J Appl Phys 16(2):259–268CrossRef
go back to reference International Society for Rock Mechanics (ISRM) (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the Commission on Testing Methods, International Society for Rock Mechanics, compilation arranged by the ISRM Turkish National Group, Ankara, Turkey International Society for Rock Mechanics (ISRM) (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the Commission on Testing Methods, International Society for Rock Mechanics, compilation arranged by the ISRM Turkish National Group, Ankara, Turkey
go back to reference Jaeger JC, Hoskins ER (1966a) Rock failure under the confined Brazilian test. J Geophys Res 71(10):2651–2659CrossRef Jaeger JC, Hoskins ER (1966a) Rock failure under the confined Brazilian test. J Geophys Res 71(10):2651–2659CrossRef
go back to reference Jaeger JC, Hoskins ER (1966b) Stresses and failure in rings of rock loaded in diametral tension or compression. Br J Appl Phys 17(5):685–692CrossRef Jaeger JC, Hoskins ER (1966b) Stresses and failure in rings of rock loaded in diametral tension or compression. Br J Appl Phys 17(5):685–692CrossRef
go back to reference Liu G, Wong LNY (2012) Discussion of water content and related physical properties of rock. In: Proceedings of EUROCK 2012, Stockholm, Sweden, 28–30 May 2012 Liu G, Wong LNY (2012) Discussion of water content and related physical properties of rock. In: Proceedings of EUROCK 2012, Stockholm, Sweden, 28–30 May 2012
go back to reference Nelson RA (1968) Modelling a jointed rock mass. MSc Thesis, Massachusetts Institute of Technology, 218 pp Nelson RA (1968) Modelling a jointed rock mass. MSc Thesis, Massachusetts Institute of Technology, 218 pp
go back to reference Newman DA, Bennett DG (1990) The effect of specimen size and stress rate for the Brazilian test—a statistical analysis. Rock Mech Rock Eng 23(2):123–134. doi:10.1007/bf01020397 CrossRef Newman DA, Bennett DG (1990) The effect of specimen size and stress rate for the Brazilian test—a statistical analysis. Rock Mech Rock Eng 23(2):123–134. doi:10.​1007/​bf01020397 CrossRef
go back to reference Padevět P, Tesárek P, Plachý T (2011) Evolution of mechanical properties of gypsum in time. Int J Mech 5(1):1–9 Padevět P, Tesárek P, Plachý T (2011) Evolution of mechanical properties of gypsum in time. Int J Mech 5(1):1–9
go back to reference Reyes O, Einstein HH (1991) Failure mechanism of fractured rock—a fracture coalescence model. In: Wittke W (ed) Proceedings of the 7th International Congress of Rock Mechanics, Aachen, Germany, September 1991. Balkema, Rotterdam, vol 1, pp 333–340 Reyes O, Einstein HH (1991) Failure mechanism of fractured rock—a fracture coalescence model. In: Wittke W (ed) Proceedings of the 7th International Congress of Rock Mechanics, Aachen, Germany, September 1991. Balkema, Rotterdam, vol 1, pp 333–340
go back to reference Satoh Y (1987) Position and load of failure in Brazilian test, a numerical analysis by Griffith criterion. J Soc Mater Sci Japan 36(410):1219–1224CrossRef Satoh Y (1987) Position and load of failure in Brazilian test, a numerical analysis by Griffith criterion. J Soc Mater Sci Japan 36(410):1219–1224CrossRef
go back to reference Shakoor A, Barefield EH (2009) Relationship between unconfined compressive strength and degree of saturation for selected sandstones. Environ Eng Geosci 15(1):29–40CrossRef Shakoor A, Barefield EH (2009) Relationship between unconfined compressive strength and degree of saturation for selected sandstones. Environ Eng Geosci 15(1):29–40CrossRef
go back to reference Tavallali A, Vervoort A (2010b) Failure of layered sandstone under Brazilian test conditions: effect of micro-scale parameters on macro-scale behaviour. Rock Mech Rock Eng 43(5):641–653. doi:10.1007/s00603-010-0084-7 CrossRef Tavallali A, Vervoort A (2010b) Failure of layered sandstone under Brazilian test conditions: effect of micro-scale parameters on macro-scale behaviour. Rock Mech Rock Eng 43(5):641–653. doi:10.​1007/​s00603-010-0084-7 CrossRef
go back to reference Van Eeckhout EM (1976) The mechanisms of strength reduction due to moisture in coal mine shales. Int J Rock Mech Min Sci Geomech Abstr 13:61–67CrossRef Van Eeckhout EM (1976) The mechanisms of strength reduction due to moisture in coal mine shales. Int J Rock Mech Min Sci Geomech Abstr 13:61–67CrossRef
go back to reference Wong LNY, Einstein HH (2006) Fracturing behavior of prismatic specimens containing single flaws. Golden Rocks 2006, The 41st US Symposium on Rock Mechanics (USRMS): 50 Years of Rock Mechanics—Landmarks and Future Challenges, Golden, Colorado, June 2006 Wong LNY, Einstein HH (2006) Fracturing behavior of prismatic specimens containing single flaws. Golden Rocks 2006, The 41st US Symposium on Rock Mechanics (USRMS): 50 Years of Rock Mechanics—Landmarks and Future Challenges, Golden, Colorado, June 2006
go back to reference Wong LNY, Einstein HH (2007) Coalescence behavior in Carrara marble and molded gypsum containing artificial flaw pairs under uniaxial compression. In: Proceedings of the 1st Canada-U.S. Rock Mechanics Symposium, Vancouver, British Columbia, Canada, 27–31 May 2007 Wong LNY, Einstein HH (2007) Coalescence behavior in Carrara marble and molded gypsum containing artificial flaw pairs under uniaxial compression. In: Proceedings of the 1st Canada-U.S. Rock Mechanics Symposium, Vancouver, British Columbia, Canada, 27–31 May 2007
go back to reference Wong LNY, Einstein HH (2009a) Using high speed video imaging in the study of cracking processes in rock. Geotech Test J 32(2):164–180. doi:10.1520/GTJ101631 Wong LNY, Einstein HH (2009a) Using high speed video imaging in the study of cracking processes in rock. Geotech Test J 32(2):164–180. doi:10.​1520/​GTJ101631
go back to reference You M, Chen X, Su C (2011) Brazilian splitting strengths of discs and rings of rocks in dry and saturated conditions. Yanshilixue Yu Gongcheng Xuebao (Chin J Rock Mech Eng) 30(3):464–472 (in Chinese) You M, Chen X, Su C (2011) Brazilian splitting strengths of discs and rings of rocks in dry and saturated conditions. Yanshilixue Yu Gongcheng Xuebao (Chin J Rock Mech Eng) 30(3):464–472 (in Chinese)
go back to reference Yu Y, Meng C (2005) 3-D distribution of tensile stress in rock specimens for the Brazilian test. J Univ Sci Technol Beijing Miner Metall Mater (Eng Ed) 12(6):495–499 Yu Y, Meng C (2005) 3-D distribution of tensile stress in rock specimens for the Brazilian test. J Univ Sci Technol Beijing Miner Metall Mater (Eng Ed) 12(6):495–499
go back to reference Yue ZQ, Chen S, Tham LG (2003) Finite element modeling of geomaterials using digital image processing. Comput Geotech 30(5):375–397CrossRef Yue ZQ, Chen S, Tham LG (2003) Finite element modeling of geomaterials using digital image processing. Comput Geotech 30(5):375–397CrossRef
go back to reference Zou C, Wong LNY, Cheng Y (2012) The strength and crack behaviour of molded gypsum under high strain rate. In: Proceedings of the 46th US Rock Mechanics/Geomechanics Symposium, Chicago, Illinois, June 2012. ARMA, Chicago, pp 12–339 Zou C, Wong LNY, Cheng Y (2012) The strength and crack behaviour of molded gypsum under high strain rate. In: Proceedings of the 46th US Rock Mechanics/Geomechanics Symposium, Chicago, Illinois, June 2012. ARMA, Chicago, pp 12–339
Metadata
Title
Water Saturation Effects on the Brazilian Tensile Strength of Gypsum and Assessment of Cracking Processes Using High-Speed Video
Authors
Louis Ngai Yuen Wong
Ming Chuan Jong
Publication date
01-07-2014
Publisher
Springer Vienna
Published in
Rock Mechanics and Rock Engineering / Issue 4/2014
Print ISSN: 0723-2632
Electronic ISSN: 1434-453X
DOI
https://doi.org/10.1007/s00603-013-0436-1

Other articles of this Issue 4/2014

Rock Mechanics and Rock Engineering 4/2014 Go to the issue