Weitere Kapitel dieses Buchs durch Wischen aufrufen
Process planning that is based on environmental consciousness and energy-efficient scheduling currently plays a critical role in sustainable manufacturing processes . Despite their interrelationship, these two topics have often been considered to be independent of each other. It, therefore, would be beneficial to integrate process planning and scheduling for an integrated energy-efficient optimization of product design and manufacturing in a sustainable manufacturing system . This chapter proposes an energy-aware mathematical model for job shops that integrates process planning and scheduling . First, a mixed integrated programming model with performance indicators such as energy consumption and scheduling makespan is established to describe a multi-objective optimization problem. Because the problem is strongly non-deterministic polynomial-time hard (NP-hard), a modified genetic algorithm is adopted to explore the optimal solution (Pareto solution) between energy consumption and makespan. Finally, case studies of energy-aware integrated process planning and scheduling are performed, and the proposed algorithm is compared with other methods. The approach is shown to generate interesting results and can be used to improve the energy efficiency of manufacturing processes at the process planning and scheduling levels.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:
IEA. (2008). Worldwide trends in energy use and efficiency. Paris, French.
Herrmann, C., Bergmann, L., & Thiede, S. (2009). Methodology for the design of sustainable production systems. International Journal of Sustainable Manufacturing, 1(4), 376–395. CrossRef
Apostolos, F., Alexios, P., Georgios, P., Panagiotis, S., & George, C. (2013). Energy efficiency of manufacturing processes: A critical review in 46th CIRP Conference on Manufacturing Systems, CIRP CMS 2013, May 29–30, 2013. Setubal, Portugal: Elsevier. CrossRef
Duflou, J. R., Sutherland, J. W., Dornfeld, D., Herrmann, C., Jeswiet, J., Kara, S., et al. (2012). Towards energy and resource efficient manufacturing: A processes and systems approach. CIRP Annals—Manufacturing Technology, 61(2), 587–609. CrossRef
Sheng, P., & Srinivasan, M. (1995). Multi-objective process planning in environmentally conscious manufacturing: A feature-based approach. CIRP Annals—Manufacturing Technology, 44(1), 433–437. CrossRef
Srinivasan, M., & Sheng, P. (1999). Feature-based process planning for environmentally conscious machining—Part 1: Microplanning. Robotics and Computer-Integrated Manufacturing, 15(1), 257–270. CrossRef
Srinivasan, M., & Sheng, P. (1999). Feature-based process planning in environmentally conscious machining—Part 2: Macroplanning. Robotics and Computer-Integrated Manufacturing, 15(1), 271–281. CrossRef
Singh, S., Goodyer, J., & Popplewell, K. (2007). Integrated environmental process planning for the design and manufacture of automotive components. International Journal of Production Research, 45(18–19), 4189–4205. CrossRef
Kai, J., Zhang, H. C., Balasubramaniam, P., & Nage, S. (2009). A multiple objective optimization model for environmental benign process planning. In 16th International Conference on Industrial Engineering and Engineering Management, 2009. IE&EM’09.
Newman, S. T., Nassehi, A., Imani-Asrai, R., & Dhokia, V. (2012). Energy efficient process planning for CNC machining. CIRP Journal of Manufacturing Science and Technology, 5(2), 127–136. CrossRef
Yin, R., Cao, H., Li, H., & Sutherland, J. W. (2014). A process planning method for reduced carbon emissions. International Journal of Computer Integrated Manufacturing, 1–12.
Mouzon, G., Yildirim, M. B., & Twomey, J. (2007). Operational methods for minimization of energy consumption of manufacturing equipment. International Journal of Production Research, 45(18–19), 4247–4271. CrossRef
Mouzon, G., & Yildirim, M. B. (2008). A framework to minimise total energy consumption and total tardiness on a single machine. International Journal of Sustainable Engineering, 1(2), 105–116. CrossRef
Fang, K., Uhan, N., Zhao, F., & Sutherland, J. W. (2011). A new approach to scheduling in manufacturing for power consumption and carbon footprint reduction. Amsterdam: Elsevier. CrossRef
Bruzzone, A. A. G., Anghinolfi, D., Paolucci, M., & Tonelli, F. (2012). Energy-aware scheduling for improving manufacturing process sustainability: A mathematical model for flexible flow shops. CIRP Annals—Manufacturing Technology, 61(1), 459–462. CrossRef
Zhang, L., Li, X., Gao, L., Zhang, G., & Wen, X. (2012). Dynamic scheduling model in FMS by considering energy consumption and schedule efficiency. In 2012 IEEE 16th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2012, May 23–25, 2012. Wuhan, China: IEEE Computer Society.
Liu, G.-S., Zhang, B.-X., Yang, H.-D., Chen X., & Huang G. Q. (2013). A branch-and-bound algorithm for minimizing the energy consumption in the PFS problem. Mathematical Problems in Engineering, 2013.
Dai, M., Tang, D., Giret, A., Salido, M. A., & Li, W. D. (2013). Energy-efficient scheduling for a flexible flow shop using an improved genetic-simulated annealing algorithm. Robotics and Computer-Integrated Manufacturing, 29(5), 418–429. CrossRef
Chryssolouris, G., Chan, S., & Cobb, W. (1984). Decision making on the factory floor: An integrated approach to process planning and scheduling. Robotics and Computer-Integrated Manufacturing, 1(3–4), 315–319. CrossRef
Chryssolouris, G., Chan, S., & Suh, N. P. (1985). An Integrated Approach to Process Planning and Scheduling. CIRP Annals—Manufacturing Technology, 34(1), 413–417. CrossRef
Amin-Naseri, M. R., & Afshari, A. J. (2012). A hybrid genetic algorithm for integrated process planning and scheduling problem with precedence constraints. International Journal of Advanced Manufacturing Technology, 59(1–4), 273–287. CrossRef
Guo, Y. W., Li, W. D., Mileham, A. R., & Owen, G. W. (2009). Applications of particle swarm optimization in integrated process planning and scheduling. Robotics and Computer-Integrated Manufacturing, 25(2), 280–288. CrossRef
Li, W. D., & McMahon, C. A. (2007). A simulated annealing-based optimization approach for integrated process planning and scheduling. International Journal of Computer Integrated Manufacturing, 20(1), 80–95. CrossRef
Li, X., Gao, L., Shao, X., Zhang, C., & Wang, C. (2010). Mathematical modeling and evolutionary algorithm-based approach for integrated process planning and scheduling. Computers & Operations Research, 37(4), 656–667. CrossRef
Mohammadi, G., Karampourhaghghi, A., & Samaei, F. (2012). A multi-objective optimization model to integrating flexible process planning and scheduling based on hybrid multi-objective simulated annealing. International Journal of Production Research, 50(18), 5063–5076. CrossRef
Morad, N., & Zalzala, A. (1999). Genetic algorithms in integrated process planning and scheduling. Journal of Intelligent Manufacturing, 10(2), 169–179. CrossRef
Liu, F., Xu, Z.-J., & Dan, B. (1995). Energy performance of machining systems with its application. Beijing: China Machine Press.
Khoshnevis, B., & Chen, Q. (1991). Integration of process planning and scheduling functions. Journal of Intelligent Manufacturing, 2(3), 165–175. CrossRef
Holland, J. H. (1992). Adaptation in natural and artificial systems: An introductory analysis with applications to biology, control, and artificial intelligence. Cambridge, MA: MIT Press.
Rene Thomas R. D. A. (1990). Biological Feedback. CRC Press: Boca Raton, FL.
Dong, C. Y., & Sun, S. D. (2007). Immune genetic algorithm job scheduling process and collaborative optimization. Mechanical Science and Technology, 26(6), 761–766. MathSciNet
Moon, C., Lee, Y. H., Jeong, C. S., & Yun, Y. (2008). Integrated process planning and scheduling in a supply chain. Computers & Industrial Engineering, 54(4), 1048–1061. CrossRef
Zhu, H., Ye, W., & Bei, G. (2009). A particle swarm optimization for integrated process planning and scheduling. In 2009 IEEE 10th International Conference on Computer-Aided Industrial Design and Conceptual Design: E-Business, Creative Design, Manufacturing—CAID and CD’2009, November 26–29, 2009. Wenzhou, China: IEEE Computer Society.
Liu, Y., Dong, H., Lohse, N., Petrovic, S., & Gindy, N. (2014). An investigation into minimising total energy consumption and total weighted tardiness in job shops. Journal of Cleaner Production, 65, 87–96. CrossRef
- Energy-aware Integrated Process Planning and Scheduling for Job Shops
D. B. Tang
Y. C. Xu
W. D. Li
- Chapter 2
in-adhesives, MKVS, Neuer Inhalt/© Zühlke, Hellmich GmbH/© Hellmich GmbH, Neuer Inhalt/© momius | stock.adobe.com